iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CR ISO 14638:1996

(Main)

Geometrical product specification - Masterplan (ISO/TR 14638:1995)

Geometrical product specification - Masterplan (ISO/TR 14638:1995)

Gives the overview of the international standardization of Geometrical Product Specification (GPS). Explains the concept of GPS and provides a Masterplan of GPS including the existing and futural standards.

Geometrische Produktspezifikation (GPS) - Übersicht (ISO/TR 14638:1995)

Spécification géométrique des produits (GPS) - Schéma directeur (ISO/TR 14638:1995)

Le présent Rapport Technique présente la vue d'ensemble de la normalisation internationale dans le domaine de la spécification géométrique des produits (GPS). Il explique le concept GPS et fournit un schéma directeur sur les normes existantes et à établir relevant de la responsabilité de l'ISO/TC 3, l'ISO/TC 10/SC 5 et l'ISO/TC 57. Il mentionne aussi des normes et travaux de normalisation GPS qui sont en dehors du domaine de responsabilité des comités (TCs) mentionnés ci-dessus, afin de compléter l'information sur les normes internationales GPS. Ces normes, qui ne relèvent pas de l'ISO/TC 3, TC 10/SC 5 et TC 57, ne sont citées qu'à titre d'exemples et ne constituent pas une liste complète et exhaustive des normes GPS complémentaires. Ce rapport technique fournit des informations aux utilisateurs industriels des normes GPS ainsi qu'aux TCs de l'ISO qui utilisent le contenu des normes GPS dans leurs propres normes internationales ou qui produisent des normes ISO GPS complémentaires, afin d'améliorer la compréhension mutuelle et l'utilisation du concept GPS.

Geometrijska specifikacija proizvoda - Glavni načrt (ISO/TR 14638:1995)

General Information

Status
Withdrawn
Publication Date
22-Oct-1996
Withdrawal Date
27-Jan-2015
ICS
17.040.01 - Linear and angular measurements in general
Technical Committee
CEN/TC 290 - Dimensional and geometrical product specification and verification
Drafting Committee
CEN/TC 290 - Dimensional and geometrical product specification and verification
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
28-Jan-2015
Ref Project
SIST CR ISO 14638:2004 - Geometrical product specification - Masterplan (ISO/TR 14638:1995)

Relations

Replaced By
EN ISO 14638:2015 - Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015)
Effective Date
04-Feb-2015

Buy Standard

CR ISO 14638:2004CR ISO 14638:2004
PreviousNext
Standard
CR ISO 14638:2004
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geometrische Produktspezifikation (GPS) - Übersicht (ISO/TR 14638:1995)Spécification géométrique des produits (GPS) - Schéma directeur (ISO/TR 14638:1995)Geometrical product specification - Masterplan (ISO/TR 14638:1995)17.040.01Linearne in kotne meritve na splošnoLinear and angular measurements in generalICS:Ta slovenski standard je istoveten z:CR ISO 14638:1996SIST CR ISO 14638:2004de01-november-2004SIST CR ISO 14638:2004SLOVENSKI
STANDARD
SIST
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 1:2022(Main)
Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties (ISO 1:2022)
SIST EN ISO 1:2022

This document defines the concepts of a reference temperature and the standard reference temperature and specifies the standard reference temperature value for the specification of geometrical and dimensional properties of an object. Some examples of geometrical and dimensional properties include size, location, orientation (including angle), form and surface texture of a workpiece.
This document is also applicable to the definition of the measurand used in verification or calibration.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21204:2020(Main)
Geometrical product specifications (GPS) - Transition specification (ISO 21204:2020)
SIST EN ISO 21204:2020

This document defines a number of specification operators for the specification of extended edge transition features between features. An edge transition feature is an integral feature connecting two adjacent integral features. The extended edge transition feature includes portions of the adjacent features. All these specifications apply to any line in a defined direction in the extended edge transition feature. This document also defines the specification modifiers and the drawing indications for such transition specifications.
The proportions and dimensions of the graphical symbols to be used are also specified.
The specifications defined in this document are suitable for relatively simple edge transition functions, for example ensuring assembly without interference. For more complex functions, geometrical tolerancing offers more precise tools.
This document is by intention limited to only edge transition features between two planes and between a cylinder and a plane nominally perpendicular to it.
Annex A gives the first approach for an algorithm to identify toleranced features and adjacent reference sections. This algorithm is subject to change as more experience is gathered.
This document provides a set of tools to express several transition specifications. It does not present any information on the relationship between a function or a use and a transition specification.
NOTE 1  Corners (the transition between three or more features) are not edge transition features and are consequently not covered by this document.
NOTE 2  An edge transition feature exists between two single features. A defined edge transition feature has a defined nominal shape and is not sharp (r = 0).

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20170:2019(Main)
Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO 20170:2019)
SIST EN ISO 20170:2019

This document describes principles and tools to control a manufacturing process in accordance with a GPS specification. For this purpose a set of one or more complementary, independent characteristics (size, form, orientation, and location characteristics independent to each other) that correlate to the manufacturing process parameters and to the manufacturing process coordinate system established from the manufacturing datum system are used.
This document describes the concept of decomposition of the macro-geometrical part of the GPS specification. It does not cover the micro-geometry, i.e. surface texture.
The objective of the decomposition presented in this document is to define correction values for manufacturing control or to perform a statistical analysis of the process.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17450-4:2018(Main)
Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
SIST EN ISO 17450-4:2018

ISO 17450-4:2017 specifies general rules for quantifying GPS deviations for individual GPS characteristics.
NOTE       GPS deviations can be local or global. A GPS characteristic defined from local GPS deviations is a parameter that transforms the set of local deviations into a global characteristic using a quantifying function (for more details, see Table 1).

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14253-1:2017(Main)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
SIST EN ISO 14253-1:2018

ISO 14253-1:2017 establishes the rules for verifying the conformity or nonconformity with a given tolerance for a characteristic of a workpiece (or a population of workpieces) or with a given maximum permissible errors for a metrological characteristic of a measuring equipment, including when the measured value falls close to the specification limits, taking measurement uncertainty into account.
ISO 14253-1:2017 applies to specifications defined in general GPS standards (see ISO 14638), i.e. standards prepared by ISO/TC 213, including:
-      workpiece specifications and population specifications (usually given as an upper specification limit or a lower specification limit or both);
-      measuring equipment specifications (usually given as maximum permissible errors).
ISO 14253-1:2017 only applies for characteristics and maximum permissible errors expressed as quantity values.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18391:2016(Main)
Geometrical product specifications (GPS) - Population specification (ISO 18391:2016)
SIST EN ISO 18391:2017

ISO 18391:2016 defines rules to establish and to indicate population specifications, which are used to specify conditions on population characteristics, which are established from a set of characteristic values obtained one on each workpiece of a population of workpieces.
A population specification (as applied to a population of workpieces considered as a collection and not as individual items) can be seen as a complementary requirement to the individual specification (as applied to each workpiece considered as individual items). Population specifications express the statistical hypotheses used on the population of workpieces.
NOTE 1       A population specification is a complement to an individual GPS specification.
NOTE 2       ISO 18391:2016 is not intended to mandate a given tolerancing method or how to calculate tolerance values. Its intent is to specify tools to allow the expression of population specifications.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17450-3:2016(Main)
Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
SIST EN ISO 17450-3:2016

ISO 17450-3:2016 gives default definitions for the extracted features (integral or derived) of workpieces, which are toleranced features in GPS specifications (dimensional, geometrical, or surface texture specifications). This part of ISO 17450 defines default geometrical features used to define GPS characteristics.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14253-5:2015(Main)
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)
SIST EN ISO 14253-5:2015

ISO 14253-5:2015 specifies concepts and terms for evaluating the uncertainties of the test values derived according to a test protocol agreed upon by the parties and relative to instrument indication(s), obtained in verification testing of GPS indicating measuring instruments.
NOTE          The uncertainty of the test values, referred to as test value uncertainty, is not to be confused with the measurement uncertainty associated with using that indicating measuring instrument to measure workpieces. The former only is covered in this part of ISO 14253; for guidance on the latter see the ISO/IEC Guide 98‑3 (GUM) and ISO 14253‑2.
When a test of an indicating measuring instrument comprises several test values, some relative to the instrument indication and some to other metrological characteristics, this part of ISO 14253 is concerned with the uncertainty of the former only.
This part of ISO 14253 does not provide guidelines to ensure the adequacy of a test protocol; rather, once a test protocol is given, it describes how to evaluate the consequent test value uncertainty.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14638:2015(Main)
Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015)
SIST EN ISO 14638:2015

ISO 14638:2014 is a fundamental ISO GPS standard. It explains the concept of Geometrical Product Specification (ISO GPS), and provides a framework to illustrate how current and future ISO GPS standards address the requirements of the ISO GPS system.
The framework is intended to be of use to users of ISO GPS standards, by illustrating the extent of the scope of the different standards, and showing how they relate to each other.
The framework is also used for structuring the development of standards for GPS by technical committee ISO/TC 213.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2538-1:2014(Main)
Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014)
SIST EN ISO 2538-1:2014

ISO 2538-1:2014 specifies terms and definitions for wedges, three series of wedge angles from 120° to 0° 30′ and a series of wedge slopes from 1:10 to 1:500, for general mechanical engineering purposes.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day