Geometrical product specifications (GPS) - Transition specification (ISO 21204:2020)

This document defines a number of specification operators for the specification of extended edge transition features between features. An edge transition feature is an integral feature connecting two adjacent integral features. The extended edge transition feature includes portions of the adjacent features. All these specifications apply to any line in a defined direction in the extended edge transition feature. This document also defines the specification modifiers and the drawing indications for such transition specifications.
The proportions and dimensions of the graphical symbols to be used are also specified.
The specifications defined in this document are suitable for relatively simple edge transition functions, for example ensuring assembly without interference. For more complex functions, geometrical tolerancing offers more precise tools.
This document is by intention limited to only edge transition features between two planes and between a cylinder and a plane nominally perpendicular to it.
Annex A gives the first approach for an algorithm to identify toleranced features and adjacent reference sections. This algorithm is subject to change as more experience is gathered.
This document provides a set of tools to express several transition specifications. It does not present any information on the relationship between a function or a use and a transition specification.
NOTE 1  Corners (the transition between three or more features) are not edge transition features and are consequently not covered by this document.
NOTE 2  An edge transition feature exists between two single features. A defined edge transition feature has a defined nominal shape and is not sharp (r = 0).

Geometrische Produktspezifikation (GPS) - Spezifikation von Übergängen (ISO 21204:2020)

Dieses Dokument legt eine Reihe an Spezifikationsoperatoren für die Spezifikation von erweiterten Kanten-übergangselementen zwischen Geometrieelementen fest. Ein Kantenübergangselement ist ein integrales Element, über das zwei angrenzende integrale Geometrieelemente verbunden sind. Das erweiterte Kanten¬übergangselement beinhaltet Teile der angrenzenden Geometrieelemente. Alle diese Spezifikationen gelten für alle Geraden in einer definierten Richtung in dem erweiterten Kantenübergangselement. Dieses Dokument definiert zudem die Spezifikations-Modifikationssymbole und die Zeichnungsangaben für solche Übergangs¬spezifikationen.
Die Proportionen und Maße der zu verwendenden graphischen Symbole sind ebenfalls angegeben.
Die in diesem Dokument definierten Spezifikationen sind für relativ einfache Kantenübergangsfunktionen geeignet, z. B. zum Sicherstellen der Montage ohne Störung. Für komplexere Funktionen bietet die geo-metrische Tolerierung präzisere Werkzeuge.
Dieses Dokument beschränkt sich bewusst nur auf Kantenübergangselemente zwischen zwei Ebenen und zwischen einem Zylinder und einer zu ihm nominell senkrechten Ebene.
Anhang A bietet den ersten Ansatz für einen Algorithmus zur Identifizierung von tolerierten Geometrie-elementen und angrenzenden Referenzabschnitten. Dieser Algorithmus kann jederzeit aktualisiert werden, falls neue Informationen vorliegen.
Dieses Dokument stellt mehrere Werkzeuge zur Angabe mehrerer Übergangsspezifikationen zur Verfügung. Es liefert keine Informationen über die Beziehung zwischen einer Funktion oder einer Verwendung und einer Übergangsspezifikation.
ANMERKUNG 1   Ecken (der Übergang zwischen drei oder mehr Geometrieelementen) sind keine Kantenübergangs-elemente und werden daher in diesem Dokument nicht berücksichtigt.
ANMERKUNG 2   Ein Kantenübergangselement ist zwischen zwei einzelnen Geometrieelementen vorhanden. Ein definiertes Kantenübergangselement besitzt eine definierte nominale Gestalt und ist nicht scharf (r = 0).

Spécifications géométriques des produits (GPS) - Spécification de transition (ISO 21204:2020)

Le présent document définit un certain nombre d'opérateurs de spécification pour la spécification des éléments de transition d'arête étendue entre des éléments. Un élément de transition d'arête est un élément intégral qui relie deux éléments intégraux adjacents. L'élément de transition d'arête étendue inclut des portions des éléments adjacents. L'ensemble de ces spécifications s'appliquent à n'importe quelle ligne suivant une direction définie dans l'élément de transition d'arête étendu. Le présent document définit également les modificateurs de spécification et les indications sur le dessin relatives aux spécifications de transition.
Il spécifie également les proportions et dimensions des symboles graphiques à utiliser.
Les spécifications définies dans le présent document s'appliquent à des fonctions de transition d'arête relativement simples, par exemple pour garantir un assemblage sans interférence. Pour des fonctions plus complexes, un tolérancement géométrique offre des outils plus précis.
De par son intention, le présent document est limité aux seuls éléments de transition d'arête entre deux plans et entre un cylindre et un plan qui lui est nominalement perpendiculaire.
L'Annexe A décrit la première approche d'un algorithme permettant d'identifier les éléments tolérancés et les sections de référence adjacentes. Cet algorithme est susceptible d'évoluer au fil des expérimentations.
Le présent document fournit un ensemble d'outils visant à exprimer plusieurs spécifications de transition. Il ne donne aucune information sur la relation entre une fonction ou une utilisation et une spécification de transition.
NOTE 1    Les angles (la transition entre au moins trois éléments) ne sont pas des éléments de transition d'arête et ne sont donc pas couverts par le présent document.
NOTE 2    Il existe un élément de transition d'arête entre deux éléments simples. Un élément de transition d'arête défini possède une forme nominale définie et n'est pas vif (r = 0).

Specifikacije geometrijskih veličin izdelka (GPS) - Specifikacija prehoda (ISO 21204:2020)

General Information

Status
Published
Publication Date
10-Mar-2020
Withdrawal Date
29-Sep-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
11-Mar-2020
Completion Date
11-Mar-2020

Buy Standard

Standard
EN ISO 21204:2020
English language
61 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 21204:2017
English language
56 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 21204:2020
01-junij-2020
Specifikacije geometrijskih veličin izdelka (GPS) - Specifikacija prehoda (ISO
21204:2020)
Geometrical product specifications (GPS) - Transition specification (ISO 21204:2020)
Geometrische Produktspezifikation (GPS) - Spezifikation von definierten Übergängen
zwischen Geometrieelementen (ISO 21204:2020)
Spécifications géométriques des produits (GPS) - Spécification de transition (ISO
21204:2020)
Ta slovenski standard je istoveten z: EN ISO 21204:2020
ICS:
17.040.40 Specifikacija geometrijskih Geometrical Product
veličin izdelka (GPS) Specification (GPS)
SIST EN ISO 21204:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 21204:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 21204:2020


EN ISO 21204
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2020
EUROPÄISCHE NORM
ICS 17.040.01
English Version

Geometrical product specifications (GPS) - Transition
specification (ISO 21204:2020)
Spécifications géométriques des produits (GPS) - Geometrische Produktspezifikation (GPS) -
Spécification de transition (ISO 21204:2020) Spezifikation von definierten Übergängen zwischen
Geometrieelementen (ISO 21204:2020)
This European Standard was approved by CEN on 16 February 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 21204:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 21204:2020
EN ISO 21204:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 21204:2020
EN ISO 21204:2020 (E)
European foreword
This document (EN ISO 21204:2020) has been prepared by Technical Committee ISO/TC 213
"Dimensional and geometrical product specifications and verification" in collaboration with Technical
Committee CEN/TC 290 “Dimensional and geometrical product specification and verification” the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2020, and conflicting national standards
shall be withdrawn at the latest by September 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 21204:2020 has been approved by CEN as EN ISO 21204:2020 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 21204:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 21204:2020
INTERNATIONAL ISO
STANDARD 21204
First edition
2020-02
Geometrical product specifications
(GPS) — Transition specification
Spécifications géométriques
...

SLOVENSKI STANDARD
oSIST prEN ISO 21204:2017
01-november-2017
6SHFLILNDFLMHJHRPHWULMVNLKYHOLþLQL]GHOND *36 6SHFLILNDFLMDGHILQLUDQLK
SUHKRGRYPHGJHRPHWULMVNLPLHOHPHQWL ,62',6
Geometrical product specifications (GPS) - Specification of defined transitions between
features (ISO/DIS 21204:2017)
Geometrische Produktspezifikation (GPS) - Spezifikation von definierten Übergängen
zwischen Geometrieelementen (ISO/DIS 21204:2017)
Spécification géométrique des produits (GPS) - Spécification de transitions définies entre
des éléments (ISO/DIS 21204:2017)
Ta slovenski standard je istoveten z: prEN ISO 21204
ICS:
17.040.40 6SHFLILNDFLMDJHRPHWULMVNLK Geometrical Product
YHOLþLQL]GHOND *36 Specification (GPS)
oSIST prEN ISO 21204:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 21204:2017

---------------------- Page: 2 ----------------------
oSIST prEN ISO 21204:2017
DRAFT INTERNATIONAL STANDARD
ISO/DIS 21204
ISO/TC 213 Secretariat: BSI
Voting begins on: Voting terminates on:
2017-07-26 2017-10-17
Geometrical product specifications (GPS) — Specification
of defined transitions between features
Spécification géométrique des produits (GPS) — Arêtes d’une forme définie
ICS: 17.040.01
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 21204:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017

---------------------- Page: 3 ----------------------
oSIST prEN ISO 21204:2017
ISO/DIS 21204:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 21204:2017
ISO/DIS 21204:2017(E)
Contents
Foreword . v
Introduction. vi
1  Scope . 1
2  Normative references . 1
3  Terms and definitions . 1
4  Basic concepts . 2
5  General indication rules . 4
5.1  Symbols . 4
5.2  Indications using the transition symbol . 6
5.2.1  General . 6
5.2.2  Indications in face view . 6
5.2.3  Indications in 3D .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.