Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering

This document specifies a method for the determination of the adhesion of the internal and external protective lacquer of aluminium tubes.
It is applicable to aluminium tubes that are coated with an internal or external protective lacquer and which are used for packing, e.g. pharmaceutical, cosmetic, hygiene, food and other household products.

Packmittel - Aluminiumtuben - Bestimmung der Haftfestigkeit des Innen- und Außenschutzlackes

Dieses Dokument legt ein Verfahren zur Bestimmung der Haftfestigkeit des Innen- und Außenschutzlackes von Aluminiumtuben fest.
Es gilt für Aluminiumtuben, die mit einem Innen- oder Außenschutzlack beschichtet sind und die für die Verpackung von Produkten, z. B. in der Pharmazie, der Kosmetik, der Hygiene sowie für Lebensmittel und andere Haushaltsprodukte, verwendet werden.

Emballage - Tubes souples en aluminium - Détermination de l'adhérence des vernis de protection intérieure et extérieure

Le présent document spécifie une méthode de détermination de l’adhérence des vernis de protection intérieure et extérieure des tubes en aluminium.
Il s’applique aux tubes en aluminium qui sont revêtus d’un vernis de protection intérieure ou extérieure et qui sont utilisés pour emballer des produits pharmaceutiques, cosmétologiques, alimentaires, des produits d’hygiène et autres produits de première nécessité.

Embalaža - Prožne aluminijaste tube - Ugotavljanje adhezije notranjih in zunanjih zaščitnih lakov

General Information

Status
Published
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
27-Oct-2021
Completion Date
27-Oct-2021

RELATIONS

Buy Standard

Draft
prEN 15421:2020
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN 15421:2020
01-september-2020

Embalaža - Prožne aluminijaste tube - Ugotavljanje adhezije notranjih in zunanjih

zaščitnih lakov

Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and

external protective lacquering
Packmittel - Aluminiumtuben - Bestimmung der Haftfestigkeit des Innen- und
Außenschutzlackes

Emballage - Tubes souples en aluminium - Détermination de l'adhérence des vernis de

protection intérieure et extérieure
Ta slovenski standard je istoveten z: prEN 15421
ICS:
55.120 Pločevinke. Tube Cans. Tins. Tubes
77.150.10 Aluminijski izdelki Aluminium products
oSIST prEN 15421:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 15421:2020
---------------------- Page: 2 ----------------------
oSIST prEN 15421:2020
DRAFT
EUROPEAN STANDARD
prEN 15421
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2020
ICS 55.120 Will supersede EN 15421:2007
English Version
Packaging - Flexible aluminium tubes - Determination of
the adhesion of the internal and external protective
lacquering

Emballage - Tubes souples en aluminium - Packmittel - Aluminiumtuben - Bestimmung der

Détermination de l'adhérence des vernis de protection Haftfestigkeit des Innen- und Außenschutzlackes

intérieure et extérieure

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee

CEN/TC 261.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15421:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 15421:2020
prEN 15421:2020 (E)
Contents Page

European foreword ...................................................................................................................................................... 3

1 Scope .................................................................................................................................................................... 4

2 Normative references .................................................................................................................................... 4

3 Terms and definitions ................................................................................................................................... 4

4 Principle ............................................................................................................................................................. 4

5 Apparatus ........................................................................................................................................................... 4

6 Test conditions ................................................................................................................................................. 6

7 Procedure .......................................................................................................................................................... 6

7.1 Type 1 .................................................................................................................................................................. 6

7.2 Type 2 .................................................................................................................................................................. 7

8 Test report .........................................................................................................................................................

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.