EN 15421:2007

Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering

This standard specifies a method for the determination of the adhesion of the internal and external protective lacquer of aluminium tubes.
It is applicable to aluminium tubes that are coated with an internal or external protective lacquer and which are used for packing, e.g. pharmaceutical, cosmetic, hygiene, food and other household products.

Packmittel - Aluminiumtuben - Bestimmung der Haftfestigkeit des Innen- und Außenschutzlackes

Emballage - Tubes souples en aluminium - Détermination de l'adhérence des vernis de protection intérieure et extérieure

Embalaža - Prožne aluminijaste tube - Ugotavljanje adhezije notranjih in zunanjih zaščitnih lakov

General Information

• Status: Withdrawn
• Publication Date: 13-Nov-2007
• Withdrawal Date: 26-Oct-2021
• ICS: 55.120 - Cans. Tins. Tubes
• Technical Committee: CEN/TC 261 - Packaging
• Drafting Committee: CEN/TC 261/SC 5/WG 26 - Packages made from flexible materials (e.g. flexible plastics, plastic laminates, paper/board laminated, metal foil laminates, textiles)
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 27-Oct-2021
• Ref Project: SIST EN 15421:2008 - Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering

Relations

• Replaced By: EN 15421:2021 - Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering
• Effective Date: 03-Nov-2021

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verpackung - Aluminiumtuben - Bestimmung der Haftfestigkeit des Innen- und AußenschutzlackesEmballage - Tubes souples en aluminium - Détermination de l'adhérence des vernis de protection intérieure et extérieurePackaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering77.150.10Aluminijski izdelkiAluminium products55.120Cans. Tins. TubesICS:Ta slovenski standard je istoveten z:EN 15421:2007SIST EN 15421:2008en,fr,de01-januar-2008SIST EN 15421:2008SLOVENSKI
STANDARD



SIST EN 15421:2008



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15421November 2007ICS 55.120 English VersionPackaging - Flexible aluminium tubes - Determination of theadhesion of the internal and external protective lacqueringEmballage - Tubes souples en aluminium - Déterminationde l'adhérence des vernis de protection intérieure etextérieurePackmittel - Aluminiumtuben - Bestimmung derHaftfestigkeit des Innen- und AußenschutzlackesThis European Standard was approved by CEN on 7 October 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15421:2007: ESIST EN 15421:2008



EN 15421:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Principle.4 3 Apparatus.4 4 Test conditions.6 5 Procedure.6 6 Test report.6 Bibliography.7
SIST EN 15421:2008



EN 15421:2007 (E) 3 Foreword This document (EN 15421:2007) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2008, and conflicting national standards shall be withdrawn at the latest by May 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 15421:2008



EN 15421:2007 (E) 4 1 Scope This standard specifies a method for the determination of the adhesion o
...