EN 15928:2010

Fertilizers - Determination of the fineness of grinding (dry procedure)

This European Standard specifies the dry procedure for the determination of the fineness of grinding, which is applicable to all EC type fertilizers in which requirements are given of fineness of grinding using 0,630 mm and 0,160 mm.

Düngemittel - Bestimmung der Mahlfeinheit (trockenes Verfahren)

Diese Europäische Norm legt das trockene Verfahren für die Bestimmung der Mahlfeinheit fest, das auf alle EG-Düngemitteltypen anwendbar ist, an die hinsichtlich ihres Durchgangs durch ein 0,630-mm- und ein 0,160-mm-Sieb Anforderungen an deren Mahlfeinheit gestellt sind.

Engrais - Détermination de la finesse de mouture (procédé à sec)

La présente norme européenne prescrit la méthode de détermination de la finesse de mouture à sec, applicable à tous les engrais de type CE pour lesquels les exigences portent sur une finesse de mouture aux tamis de maille 0,630 mm et 0,160 mm.

Gnojila - Določevanje finosti mletja (suhi postopek)

Ta evropski standard opredeljuje suhi postopek za določevanje finosti mletja, ki se uporablja za vsa gnojila tipa ES, za katera so podane zahteve glede finosti mletja z uporabo 0,630 mm in 0,160 mm.

General Information

• Status: Published
• Publication Date: 17-Aug-2010
• ICS: 65.080 - Fertilizers
• Technical Committee: CEN/TC 260 - Fertilizers and liming materials
• Drafting Committee: CEN/TC 260/WG 7 - Chemical analysis
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 05-Feb-2021
• Directive: 2003/2003 - Regulation (EC) N° 2003/2003 of the European Parlament and of the council of 13 October 2003 relating to fertilisers
• Directive: 2019/1009 - Regulation (EU) 2019/1009 of the European Parliament and of the Council of 5 June 2019 laying down rules on the making available on the market of EU fertilising products and amending Regulations (EC) No 1069/2009 and (EC) No 1107/2009 and repealing Regulation (EC) No 2003/2003
• Mandate: M/335 - Standardization Mandate assigned to the CEN concerning the modernisation of the methods of anylysis of Fertilizers
• Ref Project: SIST EN 15928:2010 - Fertilizers - Determination of the fineness of grinding (dry procedure)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Düngemittel - Bestimmung der Mahlfeinheit (trockenes Verfahren)Engrais - Détermination de la finesse de mouture (procédé à sec)Fertilizers - Determination of the fineness of grinding (dry procedure)65.080GnojilaFertilizersICS:Ta slovenski standard je istoveten z:EN 15928:2010SIST EN 15928:2010en,fr,de01-december-2010SIST EN 15928:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15928
August 2010 ICS 65.080 English Version
Fertilizers - Determination of the fineness of grinding (dry procedure)
Engrais - Détermination de la finesse de mouture (procédé à sec)
Düngemittel - Bestimmung der Mahlfeinheit (trockenes Verfahren) This European Standard was approved by CEN on 16 July 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15928:2010: ESIST EN 15928:2010
...