EN ISO 9692-3:2001

Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2000)

This standard gives joint preparations for aluminium and its alloys.

Schweißen und verwandte Prozesse - Empfehlungen für Fugenformen - Metall-Inertgasschweißen und Wolfram-Inertgasschweißen von Aluminium und Aluminium-Legierungen (ISO 9692-3:2000)

Diese Norm betrifft die Fugenformen für das Metall-Inertgasschweißen (131) und Wolfram-Inertgasschweißen (141) von Aluminium und Aluminium-Legierungen (siehe auch Abschnitte 3 und 4). Sie ist für volldurchgeschweißte Nähte anzuwenden. Bei teilweise durchgeschweißten Nähten können die Art der Nahtvorbereitung, Form und Maße von den aufgeführten Vorschlägen abweichen, wenn diese in der entsprechenden Anwendungsnorm oder in einer Vereinbarung zwischen den beteiligten Vertragspartnern festgelegt sind.

Soudage et techniques connexes - Recommandations pour la préparation de joints - Partie 3: Soudage MIG et TIG de l'aluminium et de ses alliages (ISO 9692-3:2000)

La présente partie de l'ISO 9692 spécifie les types de préparation de joint pour le soudage MIG (soudage à l'arc sous protection de gaz inerte avec fil-électrode fusible) et le soudage TIG (soudage à l'arc sous protection de gaz inerte avec électrode de tungstène) sur l'aluminium et ses alliages. Elle est applicable aux soudures à pleine pénétration.

Varjenje in sorodni postopki - Priporočila za pripravo zvarnih robov - 3. del: Varjenje aluminija in aluminijevih zlitin po postopkih MIG in MAG (ISO 9692-3:2000)

General Information

• Status: Withdrawn
• Publication Date: 20-Mar-2001
• Withdrawal Date: 19-Jul-2016
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 4 - Quality management in the field of welding
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 20-Jul-2016
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 9692-3:2002 - Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2000)

Relations

• Replaced By: EN ISO 9692-3:2016 - Welding and allied processes - Types of joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2016)
• Effective Date: 25-Jul-2012
• Amended By: EN ISO 9692-3:2001/A1:2003 - Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9692-3:2002
01-maj-2002
9DUMHQMHLQVRURGQLSRVWRSNL3ULSRURþLOD]DSULSUDYR]YDUQLKURERYGHO
9DUMHQMHDOXPLQLMDLQDOXPLQLMHYLK]OLWLQSRSRVWRSNLK0,*LQ0$*,62
Welding and allied processes - Recommendations for joint preparation - Part 3: Metal
inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-
3:2000)
Schweißen und verwandte Prozesse - Empfehlungen für Fugenformen - Metall-
Inertgasschweißen und Wolfram-Inertgasschweißen von Aluminium und Aluminium-
Legierungen (ISO 9692-3:2000)
Soudage et techniques connexes - Recommandations pour la préparation de joints -
Partie 3: Soudage MIG et TIG de l'aluminium et de ses alliages (ISO 9692-3:2000)
Ta slovenski standard je istoveten z: EN ISO 9692-3:2001
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
77.120.10 Aluminij in aluminijeve zlitine Aluminium and aluminium
alloys
SIST EN ISO 9692-3:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9692-3:2002

---------------------- Page: 2 ----------------------

SIST EN ISO 9692-3:2002
EUROPEAN STANDARD
EN ISO 9692-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2001
ICS 25.160.10
English version
Welding and allied processes - Recommendations for joint
preparation - Part 3: Metal inert gas welding and tungsten inert
gas welding of aluminium and its alloys (ISO 9692-3:2000)
Soudage et techniques connexes - Recommandations pour Schweißen und verwandte Prozesse - Empfehlungen für
la préparation de joints - Partie 3: Soudage MIG et TIG de Fugenformen - Metall-Inertgasschweißen und Wolfram-
l'aluminium et de ses alliages (ISO 9692-3:2000) Inertgasschweißen von Aluminium und Aluminium-
Legierungen (ISO 9692-3:2000)
This European Standard was approved by CEN on 15 February 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9692-3:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9692-3:2002
Page 2
EN ISO 9692-3:2001
Foreword
The text of the International Standard ISO 9692-3:2000 has been prepared by Technical
Committee ISO/TC 44 "Welding and allied processes" in collaboration with Technical Committee
CEN/TC 121 "Welding", the secretariat of which is held by DS.
This document was originally processed in parallel with ISO.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by September 2001, and conflicting national
standards shall be withdrawn at the latest by September 2001.
This European Standard has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of
EU Directive(s).
For relationship with EU Directive(s), see informative annex ZB, which is an integral part of this
standard.
EN ISO 9692 consists of the following versions with the main title Welding and allied processes –
Recommendations for joint preparation :
- Part 1: Recommendations for metal-arc welding with covered electrode, gas-shielded metal-
arc welding and gas welding; joint preparations for steel (under revision)
- Part 2: Submerged arc welding of steels
- Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys
- Part 4: Clad steels
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 9692-3:2000 has b
...