Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys

This standard defines degrees of weldability and brazeability for materials or families of materials used in the aerospace industry.
It comprises a series of sheets, by materials or by material family which:
-   indicate the main titles, the typical chemical composition and the main characteristics,
-   contain recommendations for welding and brazing,
-   indicate a degree of weldability or brazeability for a given process under defined conditions.
-   indicate a value of the mechanical strength coefficient of the welded joint for each welding process, when it could be extracted from bibliographic references referring to it. The joint coefficient is expressed as a ratio of the tensile strength of the welded joint to the tensile strength of the base alloy.
It is applicable without restriction for the manufacturing of new parts or for repair.

Luft- und Raumfahrt - Schweiß- und Lötverbindungen für die Luft- und Raumfahrt - Schweißbarkeitsgrad und Lötbarkeitsgrad von Werkstoffen - Teil 002: Gleichartige Verbingungen Aluminium und Aluminiumlegierungen

Série aérospatiale - Assemblages soudés et brasés pour constructions aérospatiales - Soudabilité et brasabilité des matériaux - Partie 002 : Assemblages homogènes de l’aluminium et des alliages d'aluminium

Aeronavtika - Varjeni in trdo spajkani sestavi za konstrukcije v aeronavtiki - Varilnost in spajkalnost materialov - 002. del: Homogeni sestavi iz aluminija in aluminijevih zlitin

General Information

Status
Published
Publication Date
22-Apr-2008
Withdrawal Date
30-Oct-2008
Technical Committee
Drafting Committee
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
30-Jun-2017

Buy Standard

Standard
EN 4632-002:2008
English language
34 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Varjeni in trdo spajkani sestavi za konstrukcije v aeronavtiki -
Varilnost in spajkalnost materialov - 002. del: Homogeni sestavi iz aluminija in aluminijevih zlitinLuft- und Raumfahrt - Schweiß- und Lötverbindungen für die Luft- und Raumfahrt - Schweißbarkeitsgrad und Lötbarkeitsgrad von Werkstoffen - Teil 002: Gleichartige Verbingungen Aluminium und AluminiumlegierungenSérie aérospatiale - Assemblages soudés et brasés pour constructions aérospatiales - Soudabilité et brasabilité des matériaux - Partie 002 : Assemblages homogènes de l’aluminium et des alliages d'aluminiumAerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys49.025.20AluminijAluminium25.160.01Varjenje, trdo in mehko spajkanje na splošnoWelding, brazing and soldering in generalICS:Ta slovenski standard je istoveten z:EN 4632-002:2008SIST EN 4632-002:2008en01-julij-2008SIST EN 4632-002:2008SLOVENSKI
STANDARD



SIST EN 4632-002:2008



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4632-002April 2008ICS 49.025.01 English VersionAerospace series - Welded and brazed assemblies foraerospace constructions - Weldability and brazeability ofmaterials - Part 002: Homogeneous assemblies aluminium andaluminium alloysSérie aérospatiale - Assemblages soudés et brasés pourconstructions aérospatiales - Soudabilité et brasabilité desmatériaux - Partie 002 : Assemblages homogènes del'aluminium et des alliages d'aluminiumLuft- und Raumfahrt - Schweiß- und Lötverbindungen fürdie Luft- und Raumfahrt - Schweißbarkeitsgrad undLötbarkeitsgrad von Werkstoffen - Teil 002: GleichartigeVerbingungen Aluminium und AluminiumlegierungenThis European Standard was approved by CEN on 7 March 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4632-002:2008: ESIST EN 4632-002:2008



EN 4632-002:2008 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms, definitions, symbols and abbreviations.5 4 Use of this standard.5 5 Updating this standard.5 6 Index of aluminium and aluminium alloy sheets.6 7 Material sheets.7 Bibliography.31
SIST EN 4632-002:2008



EN 4632-002:2008 (E) 3 Foreword This document (EN 4632-002:2008) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member cou
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.