EN 4632-001:2008

Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements

This standard defines weldability and brazeability degrees for metallic materials used in aerospace construction, for processes and techniques involving welding and brazing but excluding soldering.
It also defines rules to be observed to determine the degree of weldability and brazeability.
It is applicable without any restriction for the manufacturing of new parts and repair parts.

Luft- und Raumfahrt - Schweiß- und Lötverbindungen für die Luft- und Raumfahrt -Schweißbarkeitsgrad und Lötbarkeitsgrad von Werkstoffen - Teil 001: Allgemeines

Série aérospatiale - Assemblages soudés et brasés pour constructions aérospatiales - Soudabilité et brasabilité des matériaux - Partie 001 : Généralités

Aeronavtika - Varjeni in trdo spajkani sestavi za konstrukcije v aeronavtiki - Varilnost in spajkalnost materialov - 001. del: Splošne zahteve

General Information

• Status: Published
• Publication Date: 15-Apr-2008
• Withdrawal Date: 30-Oct-2008
• ICS: 49.025.01 - Materials for aerospace construction in general
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 4632-001:2008 - Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Varjeni in trdo spajkani sestavi za konstrukcije v aeronavtiki -
Varilnost in spajkalnost materialov - 001. del: Splošne zahteveLuft- und Raumfahrt - Schweiß- und Lötverbindungen für die Luft- und Raumfahrt -Schweißbarkeitsgrad und Lötbarkeitsgrad von Werkstoffen - Teil 001: AllgemeinesSérie aérospatiale - Assemblages soudés et brasés pour constructions aérospatiales - Soudabilité et brasabilité des matériaux - Partie 001 : GénéralitésAerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements49.025.01Materiali za letalsko in vesoljsko gradnjo na splošnoMaterials for aerospace construction in general25.160.01Varjenje, trdo in mehko spajkanje na splošnoWelding, brazing and soldering in generalICS:Ta slovenski standard je istoveten z:EN 4632-001:2008SIST EN 4632-001:2008en01-julij-2008SIST EN 4632-001:2008SLOVENSKI
STANDARD



SIST EN 4632-001:2008



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4632-001April 2008ICS 49.025.01 English VersionAerospace series - Welded and brazed assemblies foraerospace constructions - Weldability and brazeability ofmaterials - Part 001: General requirementsSérie aérospatiale - Assemblages soudés et brasés pourconstructions aérospatiales - Soudabilité et brasabilité desmatériaux - Partie 001 : GénéralitésLuft- und Raumfahrt - Schweiß- und Lötverbindungen fürdie Luft- und Raumfahrt -Schweißbarkeitsgrad undLötbarkeitsgrad von Werkstoffen - Teil 001: AllgemeinesThis European Standard was approved by CEN on 7 March 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4632-001:2008: ESIST EN 4632-001:2008



EN 4632-001:2008 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Symbols, codes and abbreviations.7 5 Responsibilities.10 6 How to use this standard.10 7 Method of determining the degree of weldability and brazeability.10 Annex A (normative)
Recommendations for brazing and diffusion assemblies.11 Annex B (normative)
Model sheet.16 Annex C (normative)
Model sheet.17
SIST EN 4632-001:2008



EN 4632-001:2008 (E) 3 Foreword This document (EN 4632-001:2008) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and
...