EN 4677-001:2012

Aerospace series - Welded and brazed assemblies for aerospace construction - Joints of metallic materials by electron beam welding - Part 001: Quality of welded assemblies

This European Standard defines the rules to be satisfied to ensure the quality of joints of metallic materials by electron beam welding (reference number 51 according to EN ISO 4063).
It applies unreservedly to the manufacturing of new parts or for repair, these operations being under the responsibility of an approved manufacturer or supplier. The final responsibility is with the design authority

Luft- und Raumfahrt - Schweiß- und Lötverbindungen für die Luft- und Raumfahrt - Verbindungen metallischer Werkstoffe mittels Elektronenstrahlschweißen - Teil 001: Qualität der Schweißverbindungen

Diese Europäische Norm legt die zu erfüllenden Regeln fest, damit die Qualität der Verbindungen metallischer
Werkstoffe mittels Elektronenstrahlschweißen sichergestellt wird (Ordnungsnummer 51 nach EN ISO 4063).
Sie gilt vorbehaltlos für die Herstellung von neuen Teilen oder für die Reparatur; diese Verfahren liegen in der
Verantwortung eines anerkannten Herstellers oder Lieferers. Die abschließende Verantwortung liegt bei der
Konstruktionsstelle.

Série aérospatiale - Assemblages soudés et brasés pour constructions aérospatiales - Assemblages de matériaux métalliques soudés par faisceau d'électrons - Partie 001: Qualité des assemblages soudés

La présente Norme européenne définit les règles à observer pour garantir la qualité des constructions
aérospatiales en matériaux métalliques soudées par faisceau d’électrons (code 51 d'après la
NF EN ISO 4063).
Elle s'applique sans restriction pour la fabrication de pièces neuves ou pour la réparation, ces opérations
étant placées sous la responsabilité d'un fournisseur ou d'un réparateur agréé. La responsabilité finale
incombe à l’autorité de conception.

Aeronavtika - Varjeni in trdo spajkani sestavi za konstrukcije v aeronavtiki - Spoji kovinskih materialov pri varjenju z elektronskim snopom - 001. del: Kakovost varjenih sestavov

Ta evropski standard določa pravila, ki jih je treba izpolniti za zagotovitev kakovosti spojev kovinskih materialov pri varjenju z elektronskim snopom (referenčna številka 51 v skladu s standardom EN ISO 4063). Brez zadržkov se uporablja za izdelavo novih delov ali popravila, pri čemer je za te dejavnosti odgovoren odobreni proizvajalec ali dobavitelj. Končno odgovornost ima organ, pristojen za zasnovo.

General Information

• Status: Published
• Publication Date: 15-May-2012
• Withdrawal Date: 29-Nov-2012
• ICS: 25.160.40 - Welded joints and welds
• ICS: 49.035 - Components for aerospace construction
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 4677-001:2012 - Aerospace series - Welded and brazed assemblies for aerospace construction - Joints of metallic materials by electron beam welding - Part 001: Quality of welded assemblies

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Varjeni in trdo spajkani sestavi za konstrukcije v aeronavtiki - Spoji kovinskih materialov pri varjenju z elektronskim snopom - 001. del: Kakovost varjenih sestavovLuft- und Raumfahrt - Schweiß- und Lötverbindungen für die Luft- und Raumfahrt - Verbindungen metallischer Werkstoffe mittels Elektronenstrahlschweißen - Teil 001: Qualität der SchweißverbindungenSérie aérospatiale - Assemblages soudés et brasés pour constructions aérospatiales - Assemblages de matériaux métalliques soudés par faisceau d'électrons - Partie 001: Qualité des assemblages soudésAerospace series - Welded and brazed assemblies for aerospace construction - Joints of metallic materials by electron beam welding - Part 001: Quality of welded assemblies49.035Sestavni deli za letalsko in vesoljsko gradnjoComponents for aerospace construction25.160.40Varjeni spoji in variWelded jointsICS:Ta slovenski standard je istoveten z:EN 4677-001:2012SIST EN 4677-001:2012en01-september-2012SIST EN 4677-001:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4677-001
May 2012 ICS 25.160.40; 49.035 English Version
Aerospace series - Welded and brazed assemblies for aerospace construction - Joints of metallic materials by electron beam welding - Part 001: Quality of welded assemblies
Série aérospatiale - Assemblages soudés et brasés pour constructions aérospatiales - Assemblages de matériaux métalliques soudés par faisceau d'électrons - Partie 001: Qualité des assemblages soudés
Luft- und Raumfahrt - Schweiß- und Lötverbindungen für die Luft- und Raumfahrt - Verbindungen metallischer Werkstoffe mittels Elektronenstrahlschweißen - Teil 001: Qualität der Schweißverbindungen This European Standard was approved by CEN on 16 January 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4677-001:2012: ESIST EN 4677-001:2012

(ISO 4063) EN ISO 5817, Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections (ISO 5817) EN ISO 6507-1, Metallic materials — Vickers hardness test — Part 1: Test method (ISO 6507-1) EN ISO 6947, Welding and allied processes — Welding positions (ISO 6947) EN ISO 10042, Welding — Arc-welded joints in aluminium and its alloys — Quality levels for imperfections (ISO 10042) EN ISO 14731, Welding coordination — Tasks and responsibilities (ISO 14731) EN ISO 14744-1, Welding — Acceptance inspection of electron beam welding machines — Part 1: Principles and acceptance conditions (ISO 14744-1) SIST EN 4677-001:2012
...