iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 15595:2018/AC:2021

(Corrigendum)

Railway applications - Braking - Wheel slide protection

Railway applications - Braking - Wheel slide protection

2021-01-13, JE: TC - Correction of text: 1st sentence of 8.3.3.3.1, 2nd sentence of 8.3.3.3.2 and 2nd sentence of 8.3.3.3

Bahnanwendungen - Bremse - Gleitschutz

Applications ferroviaires - Freinage - Anti-enrayeur

Železniške naprave - Zavore - Preprečevanje zdrsa koles - Popravek AC

General Information

Status
Withdrawn
Publication Date
16-Feb-2021
Withdrawal Date
10-Oct-2023
ICS
45.040 - Materials and components for railway engineering
Technical Committee
CEN/TC 256 - Railway applications
Drafting Committee
CEN/TC 256/SC 3/WG 47 - Braking
Current Stage
Directive
2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
Mandate
M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
Ref Project
SIST EN 15595:2019/AC:2021 - Railway applications - Braking - Wheel slide protection

Relations

Merged Into
EN 15595:2018+A1:2023 - Railway applications - Braking - Wheel slide protection
Effective Date
28-Aug-2024
Corrects
EN 15595:2018 - Railway applications - Braking - Wheel slide protection
Effective Date
09-Dec-2020

Buy Standard

EN 15595:2019/AC:2021EN 15595:2019/AC:2021
PreviousNext
Corrigendum
EN 15595:2019/AC:2021
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2021
Železniške naprave - Zavore - Preprečevanje zdrsa koles - Popravek AC
Railway applications - Braking - Wheel slide protection
Bahnanwendungen - Bremse - Gleitschutz
Applications ferroviaires - Freinage - Anti-enrayeur
Ta slovenski standard je istoveten z: EN 15595:2018/AC:2021
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 15595:2018/AC

NORME EUROPÉENNE
February 2021
EUROPÄISCHE NORM
ICS 45.040
English version
Railway applications - Braking - Wheel slide protection
Applications ferroviaires - Freinage - Anti- Bahnanwendungen - Bremse - Gleitschutz
enrayeur
This corrigendum becomes effective on 17 February 2021 for incorporation in the official
English version of the EN.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.
Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservé
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13261:2024(Main)
Railway applications - Wheelsets and bogies - Axles - Product requirements
SIST EN 13261:2025

This document specifies the characteristics of axles for all heavy rail track gauges.
This document applies to heavy rail vehicles and applies, in principle, to other vehicles such as urban rail vehicles.
It specifies characteristics of forged or rolled solid and hollow axles, made from vacuum-degassed steel grade EA1N, EA1T and EA4T. For hollow axles, this document applies only to those that are manufactured by machining of a hole in a forged or rolled solid axle.
The requirements specified in this document are applicable for cylindrical seats. Most of the requirements are also applicable for axles with conical seats. Specific requirements for conical seats (e.g. geometrical dimensions of the seats...) are defined in the technical specification.
Some characteristics are given as a function of a category 1 or of a category 2.
This document is applicable to axles that are designed in accordance with the requirements of EN 13103-1:2017+A1:2022.
This document also permits variations of the material characteristics linked to alternative manufacturing processes (e.g. cold rolling, shot blasting, thermal spraying, steel cleanliness, reduction ratio, improved material properties from melting and heat treatment process, etc.).

  • Draft
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15313:2024(Main)
Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance
SIST EN 15313:2024

To ensure safety and interoperability, this document gives:
-   the limits for in-service and off-vehicle wheelsets;
-   the operations to be carried out for which the specific values (and/or criteria) remain to be defined in the maintenance plan.
This document applies to wheelsets and axleboxes complying with the following European standards:
-   EN 13103-1:2017+A1:2022;
-   EN 13260:2020, EN 13261:2020, EN 13262:2020;
-   EN 13979-1:2023;
-   EN 13715:2020;
-   EN 13749:2021+A1:2023;
that comprise:
-   the axle fitted with wheels of diameters greater than or equal to 330 mm;
-   axleboxes with bearings and grease.
This document is also applicable to wheelsets:
-   fitted with brake discs, final drive, transmission or noise-damping systems, as appropriate;
-   not complying with the above European standards, but complying with the international requirements in force, for example in UIC leaflets, before the approval of these standards;
-   with tyred wheels;
-   with resilient wheels.
For equipment not covered by Directive (EU) 2016/797, this European Standard can be applied, noting that different values can be used.
All dimensions in this document are in millimetres (mm).
It is necessary to describe in a specific document the tasks to be performed in order to maintain wheelsets within the limits defined therein.
NOTE   The specific values and criteria are defined in an appropriate maintenance plan.

  • Standard
    117 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15624:2021+A1:2024(Main)
Railway applications - Braking - Empty-loaded changeover devices
SIST EN 15624:2021+A1:2024

This document is applicable to empty-loaded changeover devices. The purpose of such devices is the generation of a load-related signal which causes the brake performance to be adjusted to the current vehicle mass.
The manually operated empty-loaded changeover devices change their output signal according to the position of the handles which together with the associated changeover plates serve as interfaces. The changeover plates read the required information for the operation of the empty-loaded changeover devices, i.e. brake weights for each position and the relevant changeover mass of the vehicle.
Automatic empty-loaded changeover devices sense a certain load threshold of the vehicle to automatically adjust the output signal when the mass of a vehicle reaches a defined value. This threshold is the changeover mass. Below this mass the vehicle’s brake system provides a reduced brake force. For the changeover mass or more the high brake force applies.
This document specifies the requirements for the design, testing and quality assurance of empty-loaded changeover devices.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 24478:2024(Main)
Railway applications - Braking - General vocabulary (ISO 24478:2023, including corrected version 2024-04)
SIST EN ISO 24478:2024

This document defines terms for brakes and braking in rolling stock.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15328:2020+A1:2024(Main)
Railway applications - Braking - Brake pads
SIST EN 15328:2020+A1:2024

This document specifies requirements for pads for disc brakes of railway rolling stock.
The document defines requirements and generic test programs for brake pads on dynamometer. This document does not cover mandatory tests to verify stopping distances in addition to laboratory, bench test and in-service tests. In order to qualify the brake pad performance in accordance with the classification the standard provides fixed parameter figures as categories defined in paragraph classification scheme.
This document is not applicable for urban rail applications.

  • Standard
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16451:2024(Main)
Railway applications - Braking - Brake pad holder
SIST EN 16451:2024

This document defines requirements for the brake pad holders with which the heavy rail vehicles and urban rail vehicles are fitted.
This document is applicable to the brake pad holders made from ferrous materials e.g. cast iron, cast steel or forged steel.
This document is not applicable for brake pad holders made of non-ferrous materials.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16207:2024(Main)
Railway applications - Braking - Functional and performance criteria of magnetic track brake systems for use in railway rolling stock
SIST EN 16207:2024

This document specifies the functionality, position, constraints and control of a magnetic track brake system (MTB system) installed in bogies for use in emergency braking and in low adhesion conditions on Mainline Trains with speeds up to 280 km/h. It covers high suspension types of MTB only and not high/low and low suspension type of MTB.
This document also contains test methods and acceptance criteria for an MTB system. It identifies interfaces with electrical equipment, bogie, track and other brake systems.
On the basis of the existing international and national standards, additional requirements are defined for:
-   conditions of application for the MTB system;
-   retardation and brake forces;
-   functional and design features;
-   strength requirements;
-   type, series and vehicle implementation tests.
For design and calculation a "reference surface" is established.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13979-1:2023(Main)
Railway applications - Wheelsets and bogies - Monobloc Wheels - Technical approval procedure - Part 1: Forged and rolled wheels
SIST EN 13979-1:2024

This document specifies a design assessment procedure of a forged and rolled monobloc wheel (RST). This assessment is carried out before the wheel is commissioned. This document describes, in particular, the assessment to be performed in order to use wheels on a European network which, in addition, have quality requirements in conformity with those defined in EN 13262.
This assessment requires that the conditions of use for the wheel are defined and this standard provides a method for defining those conditions.
The assessment of the design covers four aspects:
- a geometrical aspect: to allow interchangeability of different solutions for the same application;
­- a thermomechanical aspect: to manage wheel deformations and to ensure that braking will not cause wheels to fracture;
- a mechanical aspect: to ensure that no fatigue cracks occur in the wheel web and that no permanent deformation occurs under exceptional loading;
- an acoustic aspect: to ensure that the solution chosen is as good as the reference wheel.
This document does not cover assessment of the hub or of the rim.
This document has been drawn up for wheels of non­powered tread­braked wheelsets and applies in full to this type of wheel. For wheels on which disc brakes are mounted or toothed transmission wheels or even wheels with noise reduction devices, the requirements may be amended or supplemented.
For urban railway vehicles, other standards or documents may be used.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13749:2021+A1:2023(Main)
Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames
SIST EN 13749:2021+A1:2024

This document specifies the method to be followed to achieve a satisfactory design of bogie frames and includes design procedures, assessment methods, verification and manufacturing quality requirements. It is limited to the structural requirements of bogie frames including bolsters and axlebox housings. For the purpose of this document, these terms are taken to include all functional attachments, e.g. damper brackets.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 15427-2-3:2023(Main)
Railway applications - Wheel/rail friction management - Part 2-3: Properties and Characteristics - Adhesion materials
SIST-TS CEN/TS 15427-2-3:2023

This document specifies the requirements of adhesion materials intended to be applied to the interface between the wheel tread and the rail crown (active interface). It can be applied either directly or indirectly to the wheel tread or rail.
It outlines the information required for most approval procedures, the method of testing and routine control/monitoring of the material.
This document does not deal with Top of Rail materials. For Top of Rail materials see CEN/TS 15427 2 2:2023.

  • Technical specification
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day