EN 13631-3:2004
(Main)Explosives for civil uses - High explosives - Part 3: Determination of sensitiveness to friction of explosives
Explosives for civil uses - High explosives - Part 3: Determination of sensitiveness to friction of explosives
This document specifies a method for determining the sensitiveness to friction of explosives. This method is not applicable to liquid products.
Explosivstoffe für zivile Zwecke - Sprengstoffe - Teil 3: Bestimmung der Reibempfindlichkeit von Explosivstoffen
Dieses Dokument legt ein Verfahren zur Bestimmung der Reibempfindlichkeit von Sprengstoffen fest. Dieses Verfahren ist nicht auf flüssige Produkte anwendbar.
Explosifs à usage civil - Explosifs - Partie 3 : Détermination de la sensibilité au frottement des explosifs
Le présent document spécifie une méthode de détermination de la sensibilité au frottement des explosifs. Cette méthode n'est pas applicable aux produits liquides.
Eksplozivi za civilno uporabo – Razstreliva – 3. del: Ugotavljanje občutljivosti razstreliv na trenje
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosivstoffe für zivile Zwecke - Sprengstoffe - Teil 3: Bestimmung der Reibempfindlichkeit von ExplosivstoffenExplosifs a usage civil - Explosifs - Partie 3 : Détermination de la sensibilité au frottement des explosifsExplosives for civil uses - High explosives - Part 3: Determination of sensitiveness to friction of explosives71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:Ta slovenski standard je istoveten z:EN 13631-3:2004SIST EN 13631-3:2004en01-november-2004SIST EN 13631-3:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13631-3August 2004ICS 71.100.30 English versionExplosives for civil uses - High explosives - Part 3:Determination of sensitiveness to friction of explosivesExplosifs à usage civil - Explosifs - Partie 3 : Déterminationde la sensibilité au frottement des explosifsExplosivstoffe für zivile Zwecke - Sprengstoffe - Teil 3:Bestimmung der Reibempfindlichkeit von ExplosivstoffenThis European Standard was approved by CEN on 21 June 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13631-3:2004: E
EN 13631-3:2004 (E) 2 Contents page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.4 5 Preparation of test samples.4 5.1 Solid substances which are easily broken up or in powdered form.4 5.2 Plastic-bonded substances and other solids which are not easily broken up.5 5.3 Paste-like and gel-type substances.5 6 Apparatus.5 6.1 General.5 6.2 Loading device.5 6.3 Movable carriage.7 6.4 Porcelain plates.7 6.5 Motor and gearing.8 7 Procedure.8 8 Test report.10 Annex A (informative)
Range of applicability of the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.