EN 13938-7:2004

Explosives for civil uses - Propellants and rocket propellants - Part 7: Determination of properties of black powder

This document specifies the test methods for black powder in pellets, granular form, compressed (press-moulded cylinders with central hollow space) or as a meal for use as propellant, blasting explosive, pyrotechnic or in safety fuses.

Explosivstoffe für zivile Zwecke - Treibladungspulver und Raketentreibstoffe - Teil 7: Bestimmung der Eigenschaften von Schwarzpulver

Dieses Dokument legt Prüfverfahren für Schwarzpulver in Pellet-, Granulat-, gepresster (formgepresste Zylinder mit zentralem Hohlraum) oder Pulverform zur Verwendung als Treibmittel, Sprengstoff, in der Pyrotechnik oder in Sicherheitsanzündschnüren fest.

Explosifs à usage civil - Poudre propulsive et propergol pour fusée - Partie 7: Détermination des propriétés de la poudre noire

Le présent document spécifie les méthodes d’essai pour la poudre noire en granulats, en granulés ou
comprimée (cylindres moulés pour pressage avec un espace creux central), ou en tant que composant
principal de poudre propulsive, d’explosif de minage, de mèche pyrotechnique ou de mèches de sûreté.

Eksplozivi za civilno uporabo - Smodniki in raketna goriva - 7. del: Določanje lastnosti črnega smodnika

General Information

• Status: Published
• Publication Date: 17-Aug-2004
• Withdrawal Date: 27-Feb-2005
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: CEN/TC 321 - Explosives for civil uses
• Drafting Committee: CEN/TC 321/WG 5 - Propellants
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jul-2015
• Directive: 2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
• Directive: 93/15/EEC - Council Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses
• Mandate: M/055 - Standardization mandate to CEN for explosives for civil uses
• Ref Project: SIST EN 13938-7:2004 - Explosives for civil uses - Propellants and rocket propellants - Part 7: Determination of properties of black powder

Relations

• Revised: FprEN 13631-17 - Explosives for civil uses - Propellants and rocket propellants - Part 17: Determination of safe and reliable ignition and complete deflagration of black powder
• Effective Date: 19-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosives for civil uses - Propellants and rocket propellants - Part 7: Determination of properties of black powderExplosifs a usage civil - Poudre propulsive et propergol pour fusée - Détermination des propriétés de la poudre noireExplosivstoffe für zivile Zwecke - Treibladungspulver und Raketentreibstoffe - Teil 7: Bestimmung der Eigenschaften von SchwarzpulverTa slovenski standard je istoveten z:EN 13938-7:2004SIST EN 13938-7:2004en71.100.30ICS:SLOVENSKI
STANDARDSIST EN 13938-7:200401-november-2004

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13938-7August 2004ICS 71.100.30English versionExplosives for civil uses - Propellants and rocket propellants -Part 7: Determination of properties of black powderExplosifs à usage civil - Poudre propulsive et propergolpour fusée - Détermination des propriétés de la poudrenoireExplosivstoffe für zivile Zwecke - Treibladungspulver undRaketentreibstoffe - Teil 7: Bestimmung der Eigenschaftenvon SchwarzpulverThis European Standard was approved by CEN on 21 June 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13938-7:2004: E

Range of applicability of test methods.9 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 93/15/EEC.10 Bibliography.11

1 Scope This document specifies the test methods for black powder in pellets, granular form, compressed (press-moulded cylinders with central hollow space) or as a meal for use as propellant, blasting explosive, pyrotechnic or in safety fuses. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13631-2, Explosives for civil uses - High explosives - Part 2: Determination of thermal stability of explosives EN 13631-3, Explosives for civil uses - High explosives - Part 3: Determination of sensitiveness to friction of explosives. EN 13631-4, Explosives for civil uses - High explosives - Part 4: Determination of sensitiveness to impact of explosives EN 13857-1:2003, Explosives for civil uses - Part 1: Terminology EN 13938-4, Explosives for civil uses - Propellants and rocket propellants - Part 4: Determination of burning rate under ambient conditions EN ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:1999) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13857-1:2003 and the following apply. 3.1 bulk density mass of a free-flowing substance poured into a measuring cylinder divided by its corresponding volume 3.2 free-flowing substance substance in such a form that it can be readily transferred from one cylinder to another by pouring to give one continuous, homogeneous mass 4 Preparation of test samples For granular black powder some test methods given in 5.1 and 5.2 imply a preparation of the sample, e.g. by sieving. Details are given in the corresponding documents, the reference of which is given in Clause 2.

5.1.
...