prEN ISO/ASTM 52953

Additive Manufacturing for metals - General Principles - Registration of geometric data acquired from process-monitoring and for quality control (ISO/ASTM DIS 52953:2023)

This document sets and defines the minimum requirements for registration of geometric data acquired from process-monitoring and for quality control in Additive Manufacturing (AM), including the description of a procedure.
Furthermore, this document comprises actions that users need to register multi-modal AM data and store them in an appropriate repository.
This document is not applicable for the following types of data: data cleansing, image processing, cost, production time and personnel.
This document in only applicable for geometric data gathered and generated from non-destructive test methods and sensors by using X-ray Computer Tomography (XCT), cameras and Coordinate Measuring Machines (CMM).
This document is only applicable to metals produced through means of Laser-based powder bed fusion (PBF-LB) and Direct Energy Deposition (DED).
Note: The procedure can be applied to monitor other AM processes and materials (e.g. polymer or ceramic power bed fusion, binder jetting, and photopolymerization), but this document does not provide any data or case studies for them.

Additive Fertigung von Metallen - Allgemeine Grundsätze - Registrierung von Geometriedaten aus der Prozessüberwachung und zur Qualitätskontrolle (ISO/ASTM DIS 52953:2023)

Fabrication additive de métaux - Principes généraux - Enregistrement de données géométriques acquises à partir de la surveillance du procédé et pour le contrôle qualité (ISO/ASTM DIS 52953:2023)

Aditivna proizvodnja kovinskih izdelkov - Splošna načela - Registracija geometrijskih podatkov, pridobljenih pri spremljanju procesa in za kontrolo kakovosti (ISO/ASTM DIS 52953:2023)

General Information

• Status: Not Published
• Publication Date: 19-Nov-2024
• ICS: 25.030 - Additive manufacturing
• Technical Committee: CEN/TC 438 - Additive Manufacturing
• Drafting Committee: CEN/TC 438 - Additive Manufacturing
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 19-Jul-2023
• Due Date: 18-Nov-2023
• Completion Date: 19-Jul-2023
• Ref Project: oSIST prEN ISO/ASTM 52953:2023 - Additive Manufacturing for metals - General Principles - Registration of geometric data acquired from process-monitoring and for quality control (ISO/ASTM DIS 52953:2023)

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO/ASTM 52953:2023
01-junij-2023
Aditivna proizvodnja kovin - Splošna načela - Registracija geometrijskih podatkov,
pridobljenih pri spremljanju procesa in za nadzor kakovosti (ISO/ASTM DIS
52953:2023)
Additive Manufacturing for metals - General Principles - Registration of geometric data
acquired from process-monitoring and for quality control (ISO/ASTM DIS 52953:2023)
Additive Fertigung von Metallen - Allgemeine Grundsätze - Registrierung von
Geometriedaten aus der Prozessüberwachung und zur Qualitätskontrolle (ISO/ASTM
DIS 52953:2023)
Fabrication additive de métaux - Principes généraux - Enregistrement de données
géométriques acquises à partir de la surveillance du procédé et pour le contrôle qualité
(ISO/ASTM DIS 52953:2023)
Ta slovenski standard je istoveten z: prEN ISO/ASTM 52953
ICS:
25.030 3D-tiskanje Additive manufacturing
oSIST prEN ISO/ASTM 52953:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO/ASTM 52953:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO/ASTM 52953:2023
DRAFT INTERNATIONAL STANDARD
ISO/ASTM DIS 52953
ISO/TC 261 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-04-26 2023-07-19
Additive manufacturing for metals — General principles
— Registration of geometric data acquired from process-
monitoring and for quality control
ICS: 25.030
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/ASTM DIS 52953:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO/ASTM International 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO/ASTM 52953:2023
ISO/ASTM DIS 52953:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/ASTM DIS 52953
ISO/TC 261 Secretariat: DIN
Voting begins on: Voting terminates on:

Additive manufacturing for metals — General principles
— Registration of geometric data acquired from process-
monitoring and for quality control
ICS: 25.030
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
© ISO/ASTM International 2023 THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
NOT BE REFERRED TO AS AN INTERNATIONAL
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below STANDARD UNTIL PUBLISHED AS SUCH.
or ISO’s member body in the country of the requester. In the United States, such requests should be sent to ASTM International.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
ISO copyright office ASTM International
TECHNOLOGICAL, COMMERCIAL AND
CP 401 • Ch. de Blandonnet 8 100 Barr Harbor Drive, PO Box C700
USER PURPOSES, DRAFT INTERNATIONAL
CH-1214 Vernier, Geneva West Conshohocken, PA 19428-2959, USA
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
Phone: [phone] Phone: [phone]
POTENTIAL TO BECOME STANDARDS TO
Fax: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail] Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org Website: www.astm.org ISO/ASTM DIS 52953:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO/ASTM International 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO/ASTM International 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO/ASTM 52953:2023
ISO/ASTM DIS 52953:2023(E)
Contents Page
Foreword .iv
Introduction .
...