EN ISO/ASTM 52933:2024

Additive manufacturing - Environment, health and safety - Test method for the hazardous substances emitted from material extrusion type 3D printers in the non-industrial places (ISO/ASTM 52933:2024)

This document specifies a test method for measuring hazardous substances emitted during the operation of material extrusion type AM machines commonly used in the non-industrial places and includes non-normative suggestions for ways to reduce them.
This document specifies some of the main hazardous substances emitted from this type of machine during operation for currently commonly used materials, it describes the additional information and the associated test method for measuring hazardous substances, and includes considerations for reducing the hazardous substances and basic countermeasures.
This document specifies how to measure concentrations of hazardous substances generated in the non-industrial places (school, public place and so on) in which this type of machines are installed, and to maintain an acceptable work environment by managing field facilities, machines, filaments, and additive manufactured products for the reduction of hazardous substances.
However, this document does not cover all gas-phase chemical emissions. Only a range of Volatile Organic Compounds (VOCs) from n-hexane to n-hexadecane, including aldehydes are included. Considerations for reducing chemical emissions and for improving the work environment are given in Annexes A and B.

Additive Fertigung - Umwelt, Gesundheit und Sicherheit - Prüfverfahren für die gefährlichen Stoffe, die von 3D-Druckern mit Materialextrusion in nicht-industriellen Bereichen emittiert werden (ISO/ASTM 52933:2024)

Dieses Dokument legt ein Prüfverfahren für die Messung von Gefahrstoffen fest, die während des Betriebs von häufig an nicht-industriellen Standorten verwendeten AM Materialextrusionsmaschinen freigesetzt werden, und enthält nicht-normative Vorschläge zu ihrer Reduzierung.
Dieses Dokument legt einige der von diesem Maschinentyp während des Betriebs freigesetzten Hauptgefahrstoffe für derzeit häufig verwendete Materialien fest. Es beschreibt die zusätzlichen Informationen und die verbundenen Prüfverfahren für die Messung von Gefahrstoffen, und enthält Überlegungen zur Reduzierung von Gefahrstoffen und grundlegenden Gegenmaßnahmen.
Dieses Dokument legt fest, wie Konzentrationen von Gefahrstoffen gemessen werden, die an nicht-industriellen Standorten (Schulen, öffentliche Orte usw.), an denen dieser Maschinentyp installiert ist, generiert werden, und wie eine akzeptable Arbeitsumgebung durch die Handhabung der Feldeinrichtungen, Maschinen, Filamente und additiv gefertigten Produkte zwecks Reduzierung von Gefahrstoffen geschaffen wird.
Dieses Dokument behandelt jedoch nicht alle gasförmigen Emissionen von Chemikalien. Es umfasst lediglich eine Reihe flüchtiger organischer Verbindungen (VOC) von n Hexan bis n Hexadecan einschließlich Aldehyden. Anhang A und Anhang B enthalten Überlegungen zur Reduzierung von Chemikalien-Emissionen und zur Verbesserung der Arbeitsumgebung.

Fabrication additive - Environnement, santé et sécurité - Méthode d'essai pour les substances dangereuses émises par les imprimantes 3D de type à extrusion de matière dans les lieux non industriels (ISO/ASTM 52933:2024)

Le présent document spécifie une méthode d'essai pour mesurer les substances dangereuses émises pendant le fonctionnement de machines FA de type à extrusion de matière utilisées communément dans les lieux non industriels, et inclut des suggestions non normatives afin de les réduire.
Le présent document spécifie certaines des principales substances dangereuses émises par ce type de machine pendant le fonctionnement pour les matériaux communément utilisés actuellement, il décrit les informations supplémentaires et la méthode d'essai associée pour le mesurage des substances dangereuses, et inclut des considérations pour réduire les substances dangereuses et des contremesures de base.
Le présent document spécifie comment mesurer les concentrations de substances dangereuses générées dans les lieux non industriels (écoles, lieux publics et assimilés) dans lesquels ce type de machine est installé, et à maintenir un environnement de travail acceptable en gérant les installations de terrain, les machines, les filaments, et les produits réalisés par fabrication additive pour la réduction des substances dangereuses.
Cependant, le présent document ne couvre pas toutes les émissions de produits chimiques en phase gazeuse. Seule une gamme de Composés Organiques Volatils (COV) allant du n-hexane au n-hexadécane, y compris les aldéhydes, est incluse. Des considérations relatives à la réduction des émissions de produits chimiques et à l'amélioration de l'environnement de travail sont fournies dans les Annexes A et B.

Aditivna proizvodnja - Okolje, zdravje in varnost - Preskusna metoda za oceno emisije nevarnih snovi iz 3D tiskalnikov za iztiskanje materiala v neindustrijskih prostorih (ISO/ASTM/FDIS 52933:2023)

General Information

• Status: Published
• Publication Date: 26-Mar-2024
• ICS: 13.020.01 - Environment and environmental protection in general
• ICS: 13.040.30 - Workplace atmospheres
• ICS: 13.100 - Occupational safety. Industrial hygiene
• ICS: 25.030 - Additive manufacturing
• Technical Committee: CEN/TC 438 - Additive Manufacturing
• Drafting Committee: CEN/TC 438 - Additive Manufacturing
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 27-Mar-2024
• Completion Date: 27-Mar-2024
• Ref Project: kSIST FprEN ISO/ASTM 52933:2024 - Additive manufacturing - Environment, health and safety - Test method for the hazardous substances emitted from material extrusion type 3D printers in the non-industrial places (ISO/ASTM/FDIS 52933:2023)

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO/ASTM 52933:2023
01-maj-2023
[Not translated]
Additive manufacturing - Environment, health and safety - Test method for the hazardous
substances emitted from material extrusion type 3D printers in the non-industrial places
(ISO/ASTM/DIS 52933:2023)
Additive Fertigung - Umwelt, Gesundheit und Sicherheit - Prüfverfahren für die
gefährlichen Stoffe, die von 3D-Druckern mit Materialextrusion in nicht-industriellen
Bereichen emittiert werden (ISO/ASTM/DIS 52933:2023)
Fabrication additive - Environnement, santé et sécurité - Méthode d'essai pour les
substances dangereuses émises par les imprimantes 3D de type à extrusion de matière
dans les lieux non industriels (ISO/ASTM/DIS 52933:2023)
Ta slovenski standard je istoveten z: prEN ISO/ASTM 52933
ICS:
13.040.30 Kakovost zraka na delovnem Workplace atmospheres
mestu
13.100 Varnost pri delu. Industrijska Occupational safety.
higiena Industrial hygiene
25.030 3D-tiskanje Additive manufacturing
oSIST prEN ISO/ASTM 52933:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO/ASTM 52933:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO/ASTM 52933:2023
DRAFT INTERNATIONAL STANDARD
ISO/ASTM DIS 52933
ISO/TC 261 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-03-13 2023-06-05
Additive manufacturing — Environment, health and safety
— Test method for the hazardous substances emitted from
material extrusion type 3D printers in the non-industrial
places
ICS: 25.030; 13.040.30; 13.100
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/ASTM DIS 52933:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO/ASTM International 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO/ASTM 52933:2023
ISO/ASTM DIS 52933:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/ASTM DIS 52933
ISO/TC 261 Secretariat: DIN
Voting begins on: Voting terminates on:

Additive manufacturing — Environment, health and safety
— Test method for the hazardous substances emitted from
material extrusion type 3D printers in the non-industrial
places
ICS: 25.030; 13.040.30; 13.100
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
© ISO/ASTM International 2023 THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
NOT BE REFERRED TO AS AN INTERNATIONAL
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below STANDARD UNTIL PUBLISHED AS SUCH.
or ISO’s member body in the country of the requester. In the United States, such requests should be sent to ASTM International.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
ISO copyright office ASTM International
TECHNOLOGICAL, COMMERCIAL AND
CP 401 • Ch. de Blandonnet 8 100 Barr Harbor Drive, PO Box C700
USER PURPOSES, DRAFT INTERNATIONAL
CH-1214 Vernier, Geneva West Conshohocken, PA 19428-2959, USA
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
Phone: [phone] Phone: [phone]
POTENTIAL TO BECOME STANDARDS TO
Fax: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail] Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org Website: www.astm.org ISO/ASTM DIS 52933:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO/ASTM International 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO/ASTM International 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO/ASTM 52933:2023
ISO/ASTM DIS 52933:2023(E)
Contents Page
Foreword .
...