EN 13848-5:2008+A1:2010

Railway applications - Track - Track geometry quality - Part 5: Geometric quality levels - Plain line

This European Standard defines the minimum requirements for the quality levels of track geometry, and specifies the safety related limits for each parameter as defined in EN 13848-1.
This standard covers the following topics:
-   description of quality levels;
-   relative importance of parameters;
-   immediate action limit;
-   considerations on other quality levels.
This European Standard applies to high-speed and conventional plain line of 1 435 mm and wider gauge railways provided that the vehicles operated on those lines comply with EN 14363 and other vehicle safety standards.
For lines covered by the high speed infrastructure TSI, the requirements stated in the HS INS TSI prevail. Any track geometry parameter not covered by the HS INS TSI needs to be compliant with this European Standard.

Bahnanwendungen - Oberbau - Qualität der Gleisgeometrie - Teil 5: Geometrische Qualitätsstufen - Gleise

Diese Europäische Norm legt die Mindestanforderungen für die Qualitätsstufen der Gleisgeometrie fest und
definiert die Sicherheitsgrenzen für jeden Parameter nach EN 13848-1.
Diese Norm behandelt die folgenden Themen:
⎯ Beschreibung der Qualitätsstufen;
⎯ verhältnismäßige Bedeutung der Parameter;
⎯ Sicherheitsgrenzen;
⎯ Betrachtung anderer Qualitätsstufen.
Diese Europäische Norm gilt für Hochgeschwindigkeits- und konventionelle Strecken mit 1 435 mm und
größeren Spurweiten, vorausgesetzt, dass die Fahrzeuge, die auf diesen Strecken operieren, den
Anforderungen nach EN 14363 und anderen Fahrzeug-Sicherheitsnormen entsprechen.
Für Strecken der Hochgeschwindigkeitsstruktur TSI gelten die Anforderungen der HS INS TSI. Jeder
Parameter für die Qualität der Gleisgeometrie, der nicht in der HS INS TSI festgelegt ist, erfordert die
Übereinstimmung mit dieser Europäischen Norm.

Applications ferroviaires - Voie - Qualité géométrique de la voie - Partie 5: Niveaux de la qualité géométrique de la voie - Voie courante

La présente Norme définit les exigences minimales pour les niveaux de qualité géométrique de la voie et spécifie les
limites en relation avec la sécurité pour chaque paramètre défini dans l'EN 13848-1.
La présente Norme couvre les sujets suivants:
— description des niveaux de qualité ;
— importance spécifique des paramètres ;
— limite d’action immédiate ;
— autres niveaux de qualité.
La présente Norme européenne s'applique à la voie courante des lignes conventionnelles et à grande vitesse ayant
un écartement de voie de 1 435 mm et plus large permettant aux véhicules de circuler sur ces lignes en conformité
avec l’EN 14363 et d’autres normes de sécurité de véhicule.
Pour les lignes couvertes par la STI (Spécification Technique d’Interopérabilité) Grande vitesse — Infrastructure,
les exigences fixées par cette STI doivent prévaloir. Il est nécessaire que tous les paramètres de la géométrie de la
voie non couverts par cette STI soient conformes aux exigences de la présente Norme européenne.

Železniške naprave - Zgornji ustroj - Kakovost tirne geometrije - 5. del: Ravni kakovosti tirne geometrije

Ta evropski standard določa minimalne zahteve za ravni kakovosti tirne geometrije in omejitve, povezane z varnostjo, za vsak parameter, kot je določeno v EN 13848-1.  
Ta standard zajema naslednje teme:
- opis nivojev kakovosti;
- relativne pomembnosti parametrov;
- omejitev takojšne akcije;
- premisleke o drugih nivojih kakovosti.
Ta evropski standard velja za visokohitrostne in konvencionalne navadne tire širine 1435 mm in širše profile železniških tirov pod pogojem, da so vozila, upravljana na teh tirih, v skladu z EN 14363 in drugimi standardi o varnosti vozil.
Za tire, zajete s to infrastrukturo za visoke hitrosti TSI, prevladajo zahteve, navedene v HS INS TSI. Vsak parameter tirne geometrije, ki ni zajet s HS INS TSI, mora biti v skladu s tem evropskim standardom.

General Information

• Status: Withdrawn
• Publication Date: 27-Apr-2010
• Withdrawal Date: 22-Aug-2017
• ICS: 93.100 - Construction of railways
• Technical Committee: CEN/TC 256 - Railway applications
• Drafting Committee: CEN/TC 256/SC 1/WG 28 - Track geometry quality
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 23-Aug-2017
• Directive: 2001/16/EC - Directive 2001/16/EC of the European Parliament and of the Council of 19 March 2001 on the interoperability of the trans-European conventional rail system
• Directive: 2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
• Directive: 93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
• Directive: 96/48/EC - Interoperability of the trans-European high-speed rail system
• Mandate: M/024 - Mandate to CEN/CENELEC/ETSI for programming and standardization in the field of railway equipment
• Mandate: M/275 - Mandate to CEN/CENELEC/ETSI for standardization in the field of railway equipment on the interoperability of the Trans-European high-speed rail system
• Mandate: M/334 - Mandate for programming and standardisation addressed to CEN, CENELEC and ETSI in the field of the Interoperability of the trans-european conventional rail system
• Ref Project: SIST EN 13848-5:2008+A1:2011 - Railway applications - Track - Track geometry quality - Part 5: Geometric quality levels - Plain line

Relations

• Merged From: EN 13848-5:2008 - Railway applications - Track - Track geometry quality - Part 5: Geometric quality levels
• Effective Date: 18-Jan-2023
• Replaced By: EN 13848-5:2017 - Railway applications - Track - Track geometry quality - Part 5: Geometric quality levels - Plain line, switches and crossings
• Effective Date: 21-Dec-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave - Zgornji ustroj - Kakovost tirne geometrije - 5. del: Ravni kakovosti tirne geometrijeBahnanwendungen - Oberbau - Qualität der Gleisgeometrie - Teil 5: Geometrische Qualitätsstufen - GleiseApplications ferroviaires - Voie - Qualité géométrique de la voie - Partie 5: Niveaux de la qualité géométrique de la voie - Voie couranteRailway applications - Track - Track geometry quality - Part 5: Geometric quality levels - Plain line93.100Gradnja železnicConstruction of railways45.080Rails and railway componentsICS:Ta slovenski standard je istoveten z:EN 13848-5:2008+A1:2010SIST EN 13848-5:2008+A1:2011en,fr,de01-maj-2011SIST EN 13848-5:2008+A1:2011SLOVENSKI
STANDARD



SIST EN 13848-5:2008+A1:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13848-5:2008+A1
April 2010 ICS 93.100 Supersedes EN 13848-5:2008English Version
Railway applications - Track - Track geometry quality - Part 5: Geometric quality levels - Plain line
Applications ferroviaires - Voie - Qualité géométrique de la voie - Partie 5: Niveaux de la qualité géométrique de la voie - Voie courante
Bahnanwendungen - Oberbau - Qualität der Gleisgeometrie - Teil 5: Geometrische Qualitätsstufen - Gleise This European Standard was approved by CEN on 7 February 2008 and includes Amendment 1 approved by CEN on 22 March 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13848-5:2008+A1:2010: ESIST EN 13848-5:2008+A1:2011



EN 13848-5:2008+A1:2010 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Symbols and abbreviations .55 Background .56 Overview .57 Assessment of track geometric quality .68 Immediate action limits .78.1 Introductory remarks .78.2 Track gauge .78.3 Longitudinal level .98.4 Cross level .98.5 Alignment . 108.6 Twist .
...