CEN/TS 13388:2008

Copper and copper alloys - Compendium of compositions and products

This document provides a summary of material designations, compositions and the product forms in which they are available, for coppers and copper alloys standardized in European Standards by CEN/TC 133 "Copper and copper alloys".
It also includes copper alloys which are not standardized by CEN/TC 133 but by other CEN Technical Committees responsible for products in copper alloys, and other copper alloys not yet standardized. These alloys have been registered by CEN/TC 133 in accordance with the procedures laid down in CEN Report CR 12776.

Kupfer und Kupferlegierungen - Übersicht über Zusammensetzungen und Produkte

Dieses Dokument gibt eine Übersicht über Werkstoffbezeichnungen, Zusammensetzungen und die lieferbaren Produktformen von Kupfer und Kupferlegierungen, die in den Europäischen Normen des CEN/TC 133 "Kupfer und Kupferlegierungen" genormt sind.
Ebenfalls enthalten sind Kupferlegierungen, die nicht durch CEN/TC 133 genormt sind, jedoch durch andere Technische CEN-Komitees, die für Produkte aus Kupfer und Kupferlegierungen zuständig sind. Diese Legierungen sind durch CEN/TC 133 in Übereinstimmung mit den im CEN-Bericht CR 12776 enthaltenen Verfahren registriert worden.

Cuivre et alliages de cuivre - Inventaire et compositions et des produits

Le présent document fournit un résumé sur les désignations des matériaux, les compositions et les formes de produits disponibles, pour les cuivres et alliages de cuivre normalisés dans les Normes européennes par le CEN/TC 133 « Cuivre et alliages de cuivre ».
Il intègre également les alliages de cuivre qui ne sont pas normalisés par le CEN/TC 133 mais par d'autres Comités Techniques du CEN responsables de produits en alliages de cuivre, ainsi que d'autres alliages de cuivre qui ne sont pas encore normalisés. Ces alliages ont été enregistrés par le CEN/TC 133 conformément aux modes opératoires spécifiés dans le rapport CEN/CR 12776.

Baker in bakrove zlitine - Izvleček kemičnih sestav in izdelkov

General Information

• Status: Withdrawn
• Publication Date: 29-Apr-2008
• Withdrawal Date: 19-Feb-2013
• ICS: 77.120.30 - Copper and copper alloys
• ICS: 77.150.30 - Copper products
• Technical Committee: CEN/TC 133 - Copper and copper alloys
• Drafting Committee: CEN/TC 133 - Copper and copper alloys
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 20-Feb-2013
• Completion Date: 20-Feb-2013
• Ref Project: SIST-TS CEN/TS 13388:2008 - Copper and copper alloys - Compendium of compositions and products

Relations

• Replaces: CEN/TS 13388:2004 - Copper and copper alloys - Compendium of compositions and products
• Effective Date: 22-Dec-2008
• Replaced By: CEN/TS 13388:2013 - Copper and copper alloys - Compendium of compositions and products
• Effective Date: 27-Feb-2013

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 13388:2008
01-julij-2008
1DGRPHãþD
SIST-TS CEN/TS 13388:2004
%DNHULQEDNURYH]OLWLQH,]YOHþHNNHPLþQLKVHVWDYLQL]GHONRY
Copper and copper alloys - Compendium of compositions and products
Kupfer und Kupferlegierungen - Übersicht über Zusammensetzungen und Produkte
Cuivre et alliages de cuivre - Inventaire et compositions et des produits
Ta slovenski standard je istoveten z: CEN/TS 13388:2008
ICS:
77.120.30 Baker in bakrove zlitine Copper and copper alloys
77.150.30 Bakreni izdelki Copper products
SIST-TS CEN/TS 13388:2008 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

TECHNICAL SPECIFICATION
CEN/TS 13388
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
April 2008
ICS 77.120.30; 77.150.30 Supersedes CEN/TS 13388:2004
English Version
Copper and copper alloys - Compendium of compositions and
products
Cuivre et alliages de cuivre - Inventaire et compositions et Kupfer und Kupferlegierungen - Übersicht über
des produits Zusammensetzungen und Produkte
This Technical Specification (CEN/TS) was approved by CEN on 21 January 2008 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 13388:2008: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

CEN/TS 13388:2008 (E)
Contents Page
Foreword.4
Introduction .5
1 Scope .6
2 Normative references .6
3 Compositions of coppers and copper alloys standardized by CEN/TC 133 .6
3.1 Composition of coppers .6
3.2 Composition of copper alloys .6
3.3 Composition of master alloys .7
3.4 Composition of ingots and castings.7
3.5 Composition of filler metals .7
3.6 Composition of copper and copper alloy scrap.7
4 Available product forms of copper and copper alloys standardized by CEN/TC 133 .7
4.1 Wrought coppers and copper alloys .7
4.2 Master alloys .7
4.3 Ingots and castings .8
4.4 Filler metals .8
4.5 Scrap .
...