CEN/TS 13388:2004
(Main)Copper and copper alloys - Compendium of compositions and products
Copper and copper alloys - Compendium of compositions and products
This document provides a summary of material designations, compositions and the product forms in which they are
available, for coppers and copper alloys standardized in European Standards by CEN/TC 133 "Copper and copper
alloys".
It also includes copper alloys which are not standardized by CEN/TC 133 but by other CEN Technical Committees
responsible for products in copper alloys, and other copper alloys not yet standardized. These alloys have been
registered by CEN/TC 133 in accordance with the procedures laid down in CEN Report CR 12776.
Kupfer und Kupferlegierungen - Übersicht über Zusammensetzungen und Produkte
Dieses Dokument gibt eine Übersicht über Werkstoffbezeichnungen, Zusammensetzungen und die lieferbaren Produktformen von Kupfer und Kupferlegierungen, die in den Europäischen Normen des CEN/TC 133 "Kupfer und Kupferlegierungen" genormt sind.
Ebenfalls enthalten sind Kupferlegierungen, die nicht durch CEN/TC 133 genormt sind, jedoch durch andere Technische CEN-Komitees, die für Produkte aus Kupfer und Kupferlegierungen zuständig sind. Diese Legierungen sind durch CEN/TC 133 in Übereinstimmung mit den im CEN-Bericht CR 12776 enthaltenen Verfahren registriert worden.
Cuivre et alliages de cuivre - Inventaire des compositions chimiques et des produits
Baker in bakrove zlitine - Izvleček kemičnih sestav in izdelkov
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2004
1DGRPHãþD
SIST CR 13388:1999
%DNHULQEDNURYH]OLWLQH,]YOHþHNNHPLþQLKVHVWDYLQL]GHONRY
Copper and copper alloys - Compendium of compositions and products
Kupfer und Kupferlegierungen - Übersicht über Zusammensetzungen und Produkte
Cuivre et alliages de cuivre - Inventaire des compositions chimiques et des produits
Ta slovenski standard je istoveten z: CEN/TS 13388:2004
ICS:
77.120.30 Baker in bakrove zlitine Copper and copper alloys
77.150.30 Bakreni izdelki Copper products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TECHNICAL SPECIFICATION
CEN/TS 13388
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
June 2004
ICS 77.120.30; 77.150.30 Supersedes CR 13388:1998
English version
Copper and copper alloys - Compendium of compositions and
products
Cuivre et alliages de cuivre - Inventaire et compositions Kupfer und Kupferlegierungen - Übersicht über
chimiques et des produits Zusammensetzungen und Produkte
This Technical Specification (CEN/TS) was approved by CEN on 25 January 2004 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 13388:2004: E
worldwide for CEN national Members.
Contents Page
1 Scope.5
2 Compositions of coppers and copper alloys standardized by CEN/TC 133 .5
2.1 Composition of coppers .5
2.2 Composition of copper alloys .5
2.3 Composition of master alloys .6
2.4 Composition of ingots and castings.6
2.5 Composition of filler metals .6
2.6 Composition of copper and copper alloy scrap.6
3 Available product forms of copper and copper alloys standardized by CEN/TC 133 .7
3.1 Wrought coppers and copper alloys .7
3.2 Master alloys.7
3.3 Ingots and castings .7
3.4 Filler metals.7
3.5 Scrap.7
4 Copper and copper alloys standardized by other CEN Technical Committees.7
5 Copper and copper alloys registered by CEN/TC 133 .7
Table 1.1 — Composition of copper cathodes according to EN 1978, Cu-CATH-1 (CR001A) and Cu-
CATH-2 (CR002A).8
Table 1.2 — Composition of unalloyed copper grades made from Cu-CATH-1 (CR001A) according to
EN 1978 .9
Table 1.3 — Composition of unalloyed copper grades, other than those made from Cu-CATH-1
(CR001A) according to EN 1978.10
Table 1.4 — Composition of phosphorus-containing copper grades .10
Table 1.5 — Composition of silver-containing copper grades (silver-bearing coppers) .11
Table 2 — Composition of copper alloys, low alloyed (less than 5 % alloying elements).12
Table 3 — Composition of copper-aluminium alloys.14
Table 4 — Composition of copper-nickel alloys.14
Table 5 — Composition of copper-nickel-zinc alloys .15
Table 6 — Composition of copper-tin alloys .16
Table 7 — Composition of copper-zinc alloys, binary.17
Table 8 — Composition of copper-zinc-lead alloys .18
Table 9 — Composition of copper-zinc alloys, complex .20
Table 10 — Wrought coppers and copper alloys specified in European product standards prepared by
CEN/TC 133.22
Table 11 — Master alloys — Composition .34
Table 12.1 — Ingots and castings — Copper and copper-chromium alloys — Compositions and
casting processes.37
Table 12.2 — Ingots and castings — Copper-zinc alloys — Composition and casting processes .38
Table 12.3 — Ingots and castings — Copper-tin alloys — Composition and casting processes.41
Table 12.4 — Ingots and castings — Copper-tin-lead alloys — Composition and casting processes .42
Table 12.5 — Ingots and castings — Copper-aluminium alloys — Composition and casting processes .44
Table 12.6 — Ingots and castings — Copper-manganese-aluminium alloys — Composition and
casting processes.45
Table 12.7 — Ingots and castings — Copper-nickel alloys — Composition and casting processes .46
Table 13.1 — Filler metals — Composition of copper.47
Table 13.2 — Filler metals — Composition of miscellaneous copper alloys .48
Table 13.3 — Filler metals — Composition of copper-zinc alloys.49
Table 13.4 — Filler metals — Composition of copper-tin alloys.50
Table 13.5 — Filler metals — Composition of copper-aluminium alloys.50
Table 13.6 — Filler metals — Composition of copper-nickel-zinc alloys .51
Table 14 — Scrap — Composition .51
Table 15.1 — Class AG: silver brazing filler metals standardized by CEN/TC 121.55
Table 15.2 — Class CP: copper-phosphorus brazing filler metals standardized by CEN/TC 121.56
Table 15.3 — Class CU: copper brazing filler metals — Series CU 100 and CU 200 standardized by
CEN/TC 121 .57
Table 15.4 — Class CU: copper brazing filler metals — Series Cu 300 standardized by CEN/TC 121 .57
Table 16 — Composition of copper alloys, standardized by CLC/TC 9X.58
Foreword
This document CEN/TS 13388:2004 has been prepared by Technical Committee CEN/TC 133 “Copper and copper
alloys”, the secretariat of which is held by DIN.
This document supersedes CR 13388:1998.
In comparison with the first edition of CR 13388:1998, the following significant technical changes were made:
a) In view of the changes introduced by CEN to their range of deliverables this edition of the compendium is pub-
lished as a Technical Specification in place of the previous CEN Report.
b) Since publication of the 1998 edition of the compendium, several TC 133 standards have progressed to final
publication, a revision of EN 1981 has been published and other amendments and 3 corrigenda have been
issued. Tables 1.1 and 16 have been added. These changes are reflected in this current edition.
This document includes a Bibliography.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following coun-
tries are bound to announce this Technical Specification: Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
Introduction
CEN/TC 133 "Copper and copper alloys" was established in 1988 to prepare and maintain standards in the field of
unwrought, wrought and cast products made from copper and copper alloys. Its responsibilities included develop-
ing, defining, specifying and giving guidance on, as appropriate, material compositions, designations, terminology,
dimensions and tolerances, mechanical and physical characteristics, conditions of delivery and methods of testing
peculiar to copper and copper alloys.
During the development of standards for copper and copper alloy products, the experts realized the necessity and
seized the opportunity:
a) to co-ordinate and in some cases also to rationalize the composition limits which already existed for the
various product forms;
b) to establish unique, new and identifiably European designations for copper and copper alloys, including a
numerical option to be particularly convenient for computerized handling;
c) to confirm, clarify and re-define where necessary, the terminology which already existed in common usage, at
the International level or in customs nomenclature.
CEN/TC 133 decided, in view of the new form of presentation and new parameters for the description and provision
of information on copper and copper alloy products, to prepare and publish the present consolidation and summary
of essential details.
1 Scope
This document provides a summary of material designations, compositions and the product forms in which they are
available, for coppers and copper alloys standardized in European Standards by CEN/TC 133 "Copper and copper
alloys".
It also includes copper alloys which are not standardized by CEN/TC 133 but by other CEN Technical Committees
responsible for products in copper alloys, and other copper alloys not yet standardized. These alloys have been
registered by CEN/TC 133 in accordance with the procedures laid down in CEN Report CR 12776.
2 Compositions of coppers and copper alloys standardized by CEN/TC 133
2.1 Composition of coppers
The symbol and number designations and compositions of copper grades are given in the following tables:
Table 1.1 — Composition of copper cathodes according to EN 1978, Cu-CATH-1 (CR001A) and Cu-CATH-2
(CR002A)
Table 1.2 — Composition of unalloyed copper grades made from Cu-CATH-1 (CR001A)
Table 1.3 — Composition of unalloyed copper grades, other than those made from Cu-CATH-1 (CR001A)
Table 1.4 — Composition of phosphorus-containing copper grades
Table 1.5 — Composition of silver-containing copper grades (silver-bearing coppers)
2.2 Composition of copper alloys
The symbol and number designations and compositions of copper alloys are given in the following tables:
Table 2 — Composition of copper alloys, low alloyed (less than 5 % alloying elements)
Table 3 — Composition of copper-aluminium alloys
Table 4 — Composition of copper-nickel alloys
Table 5 — Composition of copper-nickel-zinc alloys
Table 6 — Composition of copper-tin alloys
Table 7 — Composition of copper-zinc alloys, binary
Table 8 — Composition of copper-zinc-
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.