FprEN 13763-20

Explosives for civil uses - Detonators and detonating cord relays - Part 20: Verification of total electrical resistance of electric detonators

This document specifies a method for determining the electrical resistance of electric detonators. This document applies to explosives for civil uses.

Explosivstoffe für zivile Zwecke - Zünder und Sprengschnurverbinder - Teil 20: Überprüfung des elektrischen Gesamtwiderstandes elektrischer Zünder

Dieses Dokument legt ein Verfahren für die Bestimmung des elektrischen Widerstandes von elektrischen Zündern fest. Dieses Dokument gilt für Explosivstoffe für zivile Zwecke.

Explosifs à usage civil - Détonateurs et relais pour cordeau détonant - Partie 20 : Vérification de la résistance totale des détonateurs électriques

Le présent document spécifie une méthode de détermination de la résistance électrique des détonateurs électriques. Le présent document s’applique aux explosifs à usage civil.

Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 20. del: Ugotavljanje celotne upornosti električnih detonatorjev

General Information

• Status: Not Published
• Publication Date: 23-Jul-2024
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: CEN/TC 321 - Explosives for civil uses
• Drafting Committee: CEN/TC 321/WG 4 - Detonators and relays
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 20-Dec-2023
• Due Date: 24-Jul-2021
• Completion Date: 20-Dec-2023
• Directive: 2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
• Mandate: M/055 - Standardization mandate to CEN for explosives for civil uses
• Mandate: M/562 - Standardization Request on Explosives for civil use
• Ref Project: oSIST prEN 13763-20:2021 - Explosives for civil uses - Detonators and relays - Part 20: Determination of total electrical resistance of electric detonators

Relations

• Revises: EN 13763-20:2003 - Explosives for civil uses - Detonators and relays - Part 20: Determination of total electrical resistance of electric detonators
• Effective Date: 23-Oct-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2021
Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 20. del: Ugotavljanje
celotne upornosti električnih detonatorjev
Explosives for civil uses - Detonators and relays - Part 20: Determination of total
electrical resistance of electric detonators
Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 20:
Bestimmung des Gesamtwiderstandes elektrischer Zünder
Explosifs à usage civil - Détonateurs et relais - Partie 20: Détermination de la résistance
globale des détonateurs électriques
Ta slovenski standard je istoveten z: prEN 13763-20
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
prEN 13763-20
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2021
ICS 71.100.30 Will supersede EN 13763-20:2003
English Version
Explosives for civil uses - Detonators and detonating cord
relays - Part 20: Determination of total electrical
resistance of electric detonators
Explosifs à usage civil - Détonateurs et relais pour Explosivstoffe für zivile Zwecke - Zünder und
cordeau détonant - Partie 20: Détermination de la Sprengschnurverbinder - Teil 20: Bestimmung des
résistance globale des détonateurs électriques Gesamtwiderstandes elektrischer Zünder
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 321.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13763-20:2021 E
worldwide for CEN national Members.

prEN 13763-20:2021 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Principle . 6
5 Apparatus . 6
)
6 Preparation and handling of test samples and test pieces . 6
7 Procedure . 6
8 Expression of results . 6
9 Test report . 7
Annex ZA (informative) Relationship between this European Standard and the essential
safety requirements of Directive 2014/28/EU relating to the making available on the
market and supervision of explosives for civil uses aimed to be covered . 8
Bibliography . 9
prEN 13763-20:2021 (E)
European foreword
This document (prEN 13763-20:2021) has been prepared by Technical Committee CEN/TC 321
“Explosives for civil uses”, the secretariat of which is held by UNE.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 13763-20:2003.
In comparison with the previous edition, the following technical modifications have been made:
a) Clause 1, Scope, now specifies that this document is applicable to explosives for civil uses;
b) Clause 6, Preparation and handling of test samples and test pieces, has been updated;
c) in Clause 7, Procedure, the reference to magnetically coupled detonators has been removed;
d) Clause 8, Expression of results, has been added;
e) Annex A, Range of applicability of the test method, has been removed;
f) Annex ZA has been updated.
This document has been prepared under a Standardization Request (M/562) annexed to the Commission
Implementing Decision C(2019)6634 final as regards Explosives for civil uses given to CEN by the
European Commission and the European Free Trade Association, and supports Essential Safety
requirements of Directive 2014/28/EU.
For relationship with Directive 2014/28/EU, see informative Annex ZA, which is an integral part of this
document.
EN 13763, Explosives for civil uses — Detonators and detonating cord relays, is currently composed with
the following parts:
— Part 1: Requirements
— Part 2: Verification of thermal stability
— Part 3: Determination of sensitiveness to impact
— Part 4: Determination of resistance to abrasion of leading wires and shock tubes
— Part 5: Determination of resistance to cutting damage of leading wires and shock tubes
— Part 6: Determination of resistance to cracking in low
...