EN 12232:2003

Surfaces for sports areas - Determination of thatch depth of natural turf

This European Standard specifies a method for determination of thatch depth of natural turf sports surfaces.

Sportböden - Bestimmung der Filzdicke bei Naturrasen

Diese Europäische Norm spezifiziert eine Methode für die Bestimmung der Filzdichte von Naturrasen auf Sportflächen.

Sols sportifs - Détermination de l'épaisseur de la couche de feutre du gazon naturel

La présente Norme européenne fixe une méthode de détermination de l'épaisseur de la couche de feutre des surfaces sportives en gazon naturel.

Podloge za športne dejavnosti – Ugotavljanje debeline travne ruše naravne trave

General Information

• Status: Published
• Publication Date: 01-Apr-2003
• ICS: 97.220.10 - Sports facilities
• Technical Committee: CEN/TC 217 - Surfaces for sport areas
• Drafting Committee: CEN/TC 217/WG 3 - Turf areas
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 27-Nov-2019
• Ref Project: SIST EN 12232:2003 - Surfaces for sports areas - Determination of thatch depth of natural turf

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Podloge za športne dejavnosti – Ugotavljanje debeline travne ruše naravne traveSportböden - Bestimmung der Filzdicke bei NaturrasenSols sportifs - Détermination de l'épaisseur de la couche de feutre du gazon naturelSurfaces for sports areas - Determination of thatch depth of natural turf97.220.10Športni objektiSports facilitiesICS:Ta slovenski standard je istoveten z:EN 12232:2003SIST EN 12232:2003en01-julij-2003SIST EN 12232:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12232April 2003ICS 97.220.10English versionSurfaces for sports areas - Determination of thatch depth ofnatural turfSols sportifs - Détermination de l'épaisseur de la couche defeutre du gazon naturelSportböden - Bestimmung der Filzdicke bei NaturrasenThis European Standard was approved by CEN on 12 December 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12232:2003 ESIST EN 12232:2003
...