EN 12697-2:2002+A1:2007
(Main)Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution
Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution
This European Standard specifies a procedure for the determination of the particle size distribution of the aggregates of bituminous mixtures by sieving. The test is applicable to aggregates recovered after binder extraction in accordance with EN 12697-1.
The applicability of this European Standard is described in the product standards for bituminous mixtures.
NOTE Fibres, solid (non-soluble during extraction) additives and (some) binder modifiers influence the test result.
Asphalt - Prüfverfahren für Heißasphalt - Teil 2: Korngrößenverteilung
Diese Europäische Norm legt ein Verfahren für die Bestimmung der Korngrößenverteilung der Gesteinskör¬nungen in Asphalt mittels Siebanalyse fest. Die Prüfung ist für Gesteinskörnungen, die nach Extraktion des Bindemittels nach EN 12697 1 rückgewonnen wurden, anwendbar.
Die Anwendbarkeit dieser Europäischen Norm ist in den Produktnormen für Asphalt beschrieben.
ANMERKUNG Fasern, feste Zusatzstoffe (die bei der Extraktion nicht in Lösung gehen) und (einige) Modifizierungs¬mittel für Bindemittel beeinflussen das Prüfergebnis.
Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 2: Granulométrie
La présente norme spécifie une méthode de détermination de la granularité des granulats des matériaux enrobés, par tamisage. L’essai peut être effectué sur les granulats récupérés après réalisation de la méthode d’extraction du liant selon l’EN 12697-1.
L’applicabilité de la présente Norme européenne est décrite dans les normes de produits pour matériaux enrobés.
NOTE La présence de fibres ou d’additifs solides (non solubles après extraction) et (certains) modifiants du liant ont une influence sur le résultat d’essai.
Bitumenske zmesi - Preskusne metode za vroče asfaltne zmesi - 2. del: Ugotavljanje zrnavosti
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distributionGHOMélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné a chaud - Partie 2: GranulométrieAsphalt - Prüfverfahren für Heißasphalt - Teil 2: KorngrößenverteilungTa slovenski standard je istoveten z:EN 12697-2:2002+A1:2007SIST EN 12697-2:2004+A1:2007en,fr,de93.080.20Materiali za gradnjo cestRoad construction materialsICS:SLOVENSKI
STANDARDSIST EN 12697-2:2004+A1:200701-november-2007
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12697-2:2002+A1
July 2007 ICS 93.080.20 Supersedes EN 12697-2:2002English Version
Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution
Mélange bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 2: Granulométrie
Asphalt - Prüfverfahren für Heißasphalt - Teil 2: Korngrößenverteilung This European Standard was approved by CEN on 1 August 2002 and includes Amendment 1 approved by CEN on 16 May 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12697-2:2002+A1:2007: E
EN 12697-2:2002+A1:2007 (E) 2 Contents page Foreword.3 1 Scope.6 2 Normative references.6 3 Terms and definitions.6 4 Significance and use.6 5 Principle.6 6 Apparatus.7 7 Sample preparation.7 8 Procedure.7 9 Calculation.7 10 Report.8 11 Precision.8 Bibliography.10
EN 12697-2:2002+A1:2007 (E) 3 Foreword This document (EN 12697-2:2002+A1:2007) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2008 and conflicti
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.