Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications

This Part of this European Standard gives the specific requirements for continuously organic coated (coil coated) steel flat products used for building interior applications. It particularly specifies the performance requirements of different product flexibility categories and different corrosion protection categories. General information concerning continuously organic coated steel flat products is provided by EN 10169-1. Products for building exterior applications are covered by ENV 10169-2. The products covered are wide strips, sheets cut from wide strip, slit wide strips.

Kontinuierlich organisch beschichtete (bandbeschichtete) Flacherzeugnisse aus Stahl - Teil 3: Erzeugnisse für den Bauinneneinsatz

Produits plats en acier revêtus en continu de matières organiques (prélaqués) - Partie 3: Produits pour applications intérieures dans le bâtiment

La présente partie de cette Norme européenne donne les prescriptions particulières pour les produits plats en acier revêtus en continu de matières organiques (prélaqués) utilisés pour des applications intérieures dans le bâtiment.
Elle spécifie en particulier, les prescriptions de performance de différentes catégories de souplesse de produit et de différentes catégories de protection contre la corrosion.
Les généralités relatives aux produits plats en acier revêtus en continu de matières organiques sont données dans l'EN 10169-1.
Les produits destinés aux applications extérieures dans le bâtiment sont couverts par l'ENV 10169-2.
Les produits concernés sont des larges bandes, des tôles découpées dans les larges bandes, des larges bandes refendues, des feuillards laminés en largeur inférieure à 600 mm et des feuilles et bobines coupées à longueur.

Z organskimi materiali kontinuirno prevlečeni (prevlečeni v svitkih) ploščati jekleni izdelki – 3. del: Izdelki za notranjo vgradnjo

General Information

Status
Withdrawn
Publication Date
10-Jun-2003
Withdrawal Date
12-Oct-2010
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
13-Oct-2010
Completion Date
13-Oct-2010

Relations

Buy Standard

Standard
EN 10169-3:2003
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kontinuierlich organisch beschichtete (bandbeschichtete) Flacherzeugnisse aus Stahl - Teil 3: Erzeugnisse für den BauinneneinsatzProduits plats en acier revetus en continu de matieres organiques (prélaqués) - Partie 3: Produits pour applications intérieures dans le bâtimentContinuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications77.140.50SROL]GHONLFlat steel products and semi-products25.220.60Organske prevlekeOrganic coatingsICS:Ta slovenski standard je istoveten z:EN 10169-3:2003SIST EN 10169-3:2003en01-november-2003SIST EN 10169-3:2003SLOVENSKI
STANDARD



SIST EN 10169-3:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10169-3June 2003ICS 25.220.60; 77.140.50English versionContinuously organic coated (coil coated) steel flat products -Part 3: Products for building interior applicationsProduits plats en acier revêtus en continu de matièresorganiques (prélaqués) - Partie 3: Produits pourapplications intérieures dans le bâtimentKontinuierlich organisch beschichtete (bandbeschichtete)Flacherzeugnisse aus Stahl - Teil 3: Erzeugnisse für denBauinneneinsatzThis European Standard was approved by CEN on 9 January 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10169-3:2003 ESIST EN 10169-3:2003



EN 10169-3:2003 (E)2Contentspage1Scope.32Normative references.33Terms and definitions.54Designation.65Information to be supplied by the purchaser.76Substrates, organic coatings, manufacture of the product.86.1Steel substrates.86.2Organic coatings.86.3Manufacturing process.97Requirements.97.1Properties which form part of factory production control.97.2Performance properties.107.3Freedom of defects.118Inspection and testing.128.1General.128.2Test units.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.