iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14141:2003

(Main)

Valves for natural gas transportation in pipelines - Performance requirements and tests

Valves for natural gas transportation in pipelines - Performance requirements and tests

Valves for gas transportation in pipelines according to EN 1594.

Armaturen für den Transport von Erdgas in Fernleitungen - Anforderungen an die Gebrauchstauglichkeit und deren Prüfung

1 Anwendungsbereich
Diese Norm gilt für Armaturen (Kegelhähne, Kugelhähne, Schieber und Rückschlagklappen) in Onshore-Fernleitungen für den Transport von Erdgas nach EN 1594. Sie umfasst alle Armaturen, die Bestandteil der Fernleitung sind.
Regelarmaturen, Sicherheitsventile und alle Armaturen £ DN 50 sind aus dem Anwendungsbereich ausgeschlossen.
Diese Norm legt die Anforderungen und die entsprechenden Prüfungen fest, die bei der Fertigung und für die
Zertifizierung durchgeführt werden, um nachzuweisen, dass die Armaturen die Anforderungen erfüllen.
Neben dieser Europäischen Norm gilt die Internationale Norm ISO 14313. Sofern nichts anderes angegeben ist, müssen alle Anforderungen der vorliegenden Norm erfüllt werden. Mit einem Punkt [·] gekennzeichnete Absätze enthalten Anforderungen, die mit ISO 14313 identisch sind. Bei Widersprüchen zwischen der Europäischen Norm und der Internationalen Norm gilt die Europäische Norm.
Zusätzliche nationale Anforderungen und Prüfungen auf Grund noch nicht harmonisierter einzelstaatlicher gesetz-
licher Regelungen können erforderlich werden und sind bei der Bestellung anzugeben.

Robinetterie pour le transport de gaz naturel par des pipelines - Exigences de performance et essais

La présente Norme s'applique à tous les appareils de robinetterie (robinets à tournant conique, robinets à tournant sphérique, robinets-vannes et clapets de non retour) utilisés dans des pipelines terrestres de transport du gaz naturel conformément à l'EN 1594. Elle comprend tous les appareils de robinetterie faisant partie intégrante du pipeline.
La présente Norme européenne s'applique aux appareils de robinetterie pour pipelines dont la pression maximale de service est supérieure à 16 bar.
Sont exclus du domaine d'application les robinets de régulation, les soupapes de sûreté et tous les appareils de robinetterie £ DN 50.
La présente Norme établit les spécifications en matière d'exigences et d'essais de vérification appropriés réalisés en cours de production et à des fins de certification afin de démontrer que les appareils de robinetterie sont conformes aux exigences. Un récapitulatif des essais sur produit et des essais de type est donné en annexe H.
La présente Norme européenne fait référence à l'ISO 14313:1999 . Sauf spécification contraire, il convient de satisfaire à toutes les exigences de cette norme. Les paragraphes marqués du symbole [·] contiennent des exigences identiques aux exigences de l'ISO 14313:1999. En cas de contradiction entre la norme CEN et la norme ISO, la norme CEN prévaut.
Des exigences et essais nationaux supplémentaires conformes à différentes réglementations nationales non encore harmonisées peuvent se révéler nécessaires et doivent être indiqués dans le bon de commande.

Armature za transport zemeljskega plina po cevovodih – Zahteve glede uporabnosti in preskušanje

General Information

Status
Withdrawn
Publication Date
09-Dec-2003
Withdrawal Date
04-Jun-2013
ICS
23.060.01 - Valves in general
75.200 - Petroleum products and natural gas handling equipment
Technical Committee
CEN/TC 69 - Industrial valves
Drafting Committee
CEN/TC 69/WG 9 - Valves for the transport of petroleum and natural gas
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
05-Jun-2013
Completion Date
05-Jun-2013
Ref Project
SIST EN 14141:2004 - Valves for natural gas transportation in pipelines - Performance requirements and tests

Relations

Replaced By
EN 14141:2013 - Valves for natural gas transportation in pipelines - Performance requirements and tests
Effective Date
20-Jun-2009

Buy Standard

EN 14141:2004EN 14141:2004
PreviousNext
Standard
EN 14141:2004
English language
44 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Armature za transport zemeljskega plina po cevovodih – Zahteve glede uporabnosti in preskušanjeArmaturen für den Transport von Erdgas in Fernleitungen - Anforderungen an die Gebrauchstauglichkeit und deren PrüfungRobinetterie pour le transport de gaz naturel par des pipelines - Exigences de performance et essaisValves for natural gas transportation in pipelines - Performance requirements and tests75.200Petroleum products and natural gas handling equipment23.060.01Ventili na splošnoValves in generalICS:Ta slovenski standard je istoveten z:EN 14141:2003SIST EN 14141:2004en01-junij-2004SIST EN 14141:2004SLOVENSKI
STANDARD



SIST EN 14141:2004



SIST EN 14141:2004



SIST EN 14141:2004



SIST EN 14141:2004



SIST EN 14141:2004



SIST EN 14141:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14141:2013(Main)
Valves for natural gas transportation in pipelines - Performance requirements and tests
SIST EN 14141:2013

This European Standard applies to all valves (plug, ball, gate and check valves) used in onshore transmission pipelines for transport of natural gas in accordance with EN 1594, but with a differing temperature range according to the following three classes in accordance with EN 682:
1)   - 10 °C to 60 °C;
2)   - 20 °C to 60 °C;
3)   the range stated by the purchaser for special design.
This European Standard comprises all valves which are components of the pipeline.
This European Standard specifies valves for pipelines with a maximum operating pressure (MOP) over 16 bar.
Control valves and safety valves are excluded from the scope of this European Standard.
This European Standard specifies requirements and appropriate verification tests carried out during production and for certification purposes to verify that the valves conform to the requirements. A summary of the product and type tests is given in Annex G.
This European Standard makes reference to EN 13942. All the requirements of EN 13942 should be met unless otherwise stated. Paragraphs marked with a dot [•] indicate requirements which are identical to EN 13942.
Additional national requirements and tests in accordance with individual national legal regulations not yet harmonised may be necessary and are to be advised in the purchase order.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14141:2013(Main)
Valves for natural gas transportation in pipelines - Performance requirements and tests
SIST EN 14141:2013

This European Standard applies to all valves (plug, ball, gate and check valves) used in onshore transmission pipelines for transport of natural gas in accordance with EN 1594, but with a differing temperature range according to the following three classes in accordance with EN 682:
1)   - 10 °C to 60 °C;
2)   - 20 °C to 60 °C;
3)   the range stated by the purchaser for special design.
This European Standard comprises all valves which are components of the pipeline.
This European Standard specifies valves for pipelines with a maximum operating pressure (MOP) over 16 bar.
Control valves and safety valves are excluded from the scope of this European Standard.
This European Standard specifies requirements and appropriate verification tests carried out during production and for certification purposes to verify that the valves conform to the requirements. A summary of the product and type tests is given in Annex G.
This European Standard makes reference to EN 13942. All the requirements of EN 13942 should be met unless otherwise stated. Paragraphs marked with a dot [•] indicate requirements which are identical to EN 13942.
Additional national requirements and tests in accordance with individual national legal regulations not yet harmonised may be necessary and are to be advised in the purchase order.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14723:2009(Main)
Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2009)
SIST EN ISO 14723:2009

ISO 14723:2009 specifies requirements and gives recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for subsea application in offshore pipeline systems meeting the requirements of ISO 13623 for the petroleum and natural gas industries.
ISO 14723:2009 is not applicable to valves for pressure ratings exceeding PN 420 (Class 2500).

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13942:2009(Main)
Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:2007 modified)
SIST EN 13942:2009

This International Standard specifies requirements and provides recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for application in pipeline systems meeting the requirements of ISO 13623 for the petroleum and natural gas industries.
This International Standard is not applicable to subsea pipeline valves, as they are covered by a separate International Standard (ISO 14723).
This International Standard is not applicable to valves for pressure ratings exceeding PN 420 (Class 2 500).
On-land supply systems used by the gas supply industry are excluded from the scope of this standard.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8362-2:2024(Main)
Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2024)
SIST EN ISO 8362-2:2024

This document specifies the shape, dimensions, material, performance requirements and labelling of closures for injection vials covered by ISO 8362-1 and ISO 8362-4.
The dimensional requirements are not applicable to barrier-coated closures.
Closures specified in this document are intended for single use only.
NOTE            The potency, purity, stability and safety of a medicinal product during its manufacture and storage can strongly be affected by the nature and performance of the primary packaging.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17015-1:2024(Main)
Electronic Public Procurement - Catalogue - Part 1: Choreographies
kSIST FprEN 17015-1:2024

The purpose of this deliverable is to specify and describe choreographies for exchanging an electronic product catalogue (“catalogues”) as part of the business processes in the pre-award and post-award area, so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification are:
-   processes for submitting catalogues from the selling to the buying side;
-   processes for submitting catalogue-related data as part of a tendering process;
-   processes integrating sell-side procurement systems.
This document does not apply to the transactions used in the specified choreographies. These transactions are specified in EN 17015 2. The relationship between the choreographies and the transaction is described in Clause 8.
The identifier of this choreographies document is EN 17015 1:2024.
How to claim compliance to this choreography is specified in 6.2.3.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4126-10:2024(Main)
Safety devices for protection against excessive pressure - Part 10: Sizing of safety valves and bursting discs for gas/liquid two-phase flow (ISO 4126-10:2024)
SIST EN ISO 4126-10:2024

This document specifies the sizing of safety valves and bursting discs for gas/liquid two-phase flow in pressurized systems such as reactors, storage tanks, columns, heat exchangers, piping systems or transportation tanks/containers, see Figure 2. The possible fluid states at the safety device inlet that can result in two-phase flow are given in Table 1.
NOTE          The pressures used in this document are absolute pressures, not gauge pressures.

  • Draft
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 683-2:2024(Main)
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
SIST EN 683-2:2024

This document specifies the mechanical properties of wrought aluminium and wrought aluminium alloy finstock.
The chemical composition limits of these materials are specified in EN 573 3, unless otherwise agreed between supplier and purchaser.
The designations of wrought aluminium and wrought aluminium alloys and the temper designations used in this document are specified in EN 573 3, and the temper designations are defined in EN 515.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17016-1:2024(Main)
Electronic Public Procurement - Ordering - Part 1: Choreographies
kSIST prEN 17016-1:2024

This choreographies document specify ordering between Buyer and Seller where the Buyer wants to reach an agreement with the Seller about an order. It specifies a series of activities that govern communication between the parties and refers to the specifications where information and rules that apply are specified.
The various possible behaviours of the Seller and Buyer subsequent to the first order communication are conveyed by variants of this choreography that are specified in 5.2.
Previous activities (e.g. cataloguing) and subsequent activities (e.g. invoicing) are outside the scope of this document. If performed electronically, their implementation is covered by other choreographies.
The identifier of this choreographies document is EN 17016-1:2024.
How to claim compliance to this choreography is specified in 5.2.3.

  • Draft
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2620:2024(Main)
Analysis of natural gas - Biomethane - Determination of VOCs by thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (ISO 2620:2024)
kSIST FprEN ISO 2620:2024

This document describes a method for sampling and analysis of volatile organic compounds (VOCs), including siloxanes, terpenes, organic sulfur compounds, in natural gas and biomethane matrices, using thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (TD-GC-FID/MS).

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day