EN ISO 11508:2014

Soil quality - Determination of particle density (ISO 11508:1998)

This International Standard describes two methods for the determination of particle density of soils calculated from the mass and the volume of soil particles. The first method (4.1) is applicable to fine soil (< 2 mm diameter) and the second method (4.2) is applicable to both porous and nonporous gravel and stones (> 2 mm diameter). The particle density may be used for the calculation of the proportion of solids and of the porosity of soil layers in combination with the procedure given in ISO 11272.

Bodenbeschaffenheit - Bestimmung der Kornrohdichte (ISO 11508:1998)

Diese Internationale Norm beschreibt zwei Verfahren zur Bestimmung der Kornrohdichte von Böden mittels Berechnung aus der Masse und dem Volumen von Bodenpartikeln.
Das erste Verfahren (4.1) ist anwendbar auf Feinboden (< 2 mm Durchmesser), und das zweite Verfahren (4.2) ist anwendbar auf Böden, mit porösen und nichtporösen Kies- und Steinanteil (> 2 mm Durchmesser).
Die Kornrohdichte kann zur Berechnung des Anteils fester Substanz und der Porosität von Bodenschichten in Verbindung mit dem Verfahren nach ISO 11272 verwendet werden.

Qualité du sol - Détermination de la masse volumique des particules (ISO 11508:1998)

L'IEC 60870-6-503:2014 spécifie une méthode d'échange de données à contraintes temporelles fortes, entre centres de conduite, à travers des réseaux longues distances ou des réseaux locaux, en utilisant une pile de protocoles totalement conformes à l'ISO. Elle contient des dispositions qui satisfont à la fois des architectures centralisées ou des architectures distribuées. La présente norme inclut l'échange des indications de données en temps réel, des opérations de conduite, des données par ordre chronologique, des informations de programme ou comptables, des commandes à distance de programmes et des notifications de changement d'état. Cette nouvelle édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- certains objets sont devenus informatifs;
- les services associés aux objets informatifs sont devenus informatifs;
- certains blocs de conformité ont été retirés du domaine d'application.

Kakovost tal - Določevanje gostote delcev (ISO 11508:1998)

Standard EN-ISO 11508 opisuje dve metodi za določevanje gostote delcev tal, ki se izračuna iz mase in prostornine delcev tal. Prva metoda se uporablja za drobnozrnata tla (premer < 2 mm), druga pa se uporablja za porozen in neporozen gramoz ter kamenje (premer > 2 mm). Gostota delcev se v kombinaciji s postopkom iz standarda ISO 11272 lahko uporabi za izračun deleža trdih delcev in poroznosti plasti tal.

General Information

• Status: Withdrawn
• Publication Date: 25-Mar-2014
• Withdrawal Date: 21-Nov-2017
• ICS: 13.080.20 - Physical properties of soils
• Technical Committee: CEN/TC 444 - Environmental characterization
• Drafting Committee: CEN/TC 444/WG 5 - Physical tests
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 22-Nov-2017
• Ref Project: SIST EN ISO 11508:2014 - Soil quality - Determination of particle density (ISO 11508:1998)

Relations

• Replaced By: EN ISO 11508:2017 - Soil quality - Determination of particle density (ISO 11508:2017)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11508:2014
01-maj-2014
.DNRYRVWWDO'RORþHYDQMHJRVWRWHGHOFHY,62
Soil quality - Determination of particle density (ISO 11508:1998)
Bodenbeschaffenheit - Bestimmung der Kornrohdichte (ISO 11508:1998)
Qualité du sol - Détermination de la masse volumique des particules (ISO 11508:1998)
Ta slovenski standard je istoveten z: EN ISO 11508:2014
ICS:
13.080.20 Fizikalne lastnosti tal Physical properties of soils
SIST EN ISO 11508:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11508:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 11508:2014

EUROPEAN STANDARD
EN ISO 11508

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2014
ICS 13.080.20
English Version
Soil quality - Determination of particle density (ISO 11508:1998)
Qualité du sol - Détermination de la masse volumique des Bodenbeschaffenheit - Bestimmung der Kornrohdichte (ISO
particules (ISO 11508:1998) 11508:1998)
This European Standard was approved by CEN on 13 March 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11508:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11508:2014
EN ISO 11508:2014 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 11508:2014
EN ISO 11508:2014 (E)
Foreword
The text of ISO 11508:1998 has been prepared by Technical Committee ISO/TC 190 “Soil quality” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 11508:2014 by
Technical Committee CEN/TC 345 “Characterization of soils” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2014, and conflicting national standards shall be
withdrawn at the latest by September 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 11508:1998 has been approved by CEN as EN ISO 11508:2014 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 11508:2014

---------------------- Page: 6 ----------------------

SIST EN ISO 11508:2014
INTERNATIONAL ISO
STANDARD 11508
First edition
1998-03-01
Soil quality — Determination of particle
density
Qualité du sol — Détermination de la masse volumique des particules
A
Reference number
ISO 11508:1998(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 11508:2014
ISO 11508:1998(E)
Contents Page
1 Scope .
...