EN ISO 12058-1:2002

Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:1997)

Kunststoffe - Bestimmung der Viskosität mit einem Kugelfallviskosimeter - Teil 1: Verfahren nach Höppler (ISO 12058-1:1997)

Dieser Teil von ISO 12058 legt die allgemeinen Prinzipien eines Verfahrens zur Bestimmung der Viskosität von Polymeren oder Harzen in flüssigem emulgiertem oder dispergiertem Zustand mit einem Kugelfallviskosimeter nach Höppler fest. Er ist für die Anwendung auf Flüssigkeiten über einen Messbereich der Viskosität von 0,6 mPa × s bis 250 000 mPa × s (Temperaturbereich -20 °C bis +120 °C) vorgesehen, in dem sich Schubspannung und Schergeschwindigkeit proportional verhalten, d. h. die Viskosität ist unabhängig von der Schergeschwindigkeit. Dieses ideale Verhalten ist allgemein als Newton'sches Verhalten bekannt. Falls eine Flüssigkeit wesentlich von diesem Verhalten abweicht, können mit den verschiedenen Kugeln eines Kugelfallviskosimeters oder von Viskosi-metern mit unterschiedlichen geometrischen Eigenschaften, wie zum Beispiel Kapillar- und Rotationsviskosimeter, unterschiedliche Ergebnisse erhalten werden.

Plastiques - Détermination de la viscosité au moyen d'un viscosimètre à chute de bille - Partie 1: Méthode du tube incliné (ISO 12058-1:1997)

Polimerni materiali - Ugotavljanje viskoznosti z uporabo viskozimetra s padajočo kroglico - 1. del: Metoda z nagnjeno cevjo

General Information

• Status: Withdrawn
• Publication Date: 24-Sep-2002
• Withdrawal Date: 21-Aug-2018
• ICS: 83.080.01 - Plastics in general
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 22-Aug-2018
• Ref Project: SIST EN ISO 12058-1:2003 - Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:1997)

Relations

• Replaces: EN ISO 9371:1995/AC:2004 - Plastics - Phenolic resins in the liquid state or in solution - Determination of viscosity (ISO 9371:1990)
• Effective Date: 22-Dec-2008
• Replaces: EN ISO 9371:1995 - Plastics - Phenolic resins in the liquid state or in solution - Determination of viscosity (ISO 9371:1990)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 12058-1:2018 - Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:2018)
• Effective Date: 08-Jun-2022
• Corrected By: EN ISO 12058-1:2002/AC:2004 - Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:1997)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kunststoffe - Bestimmung der Viskosität mit einem Kugelfallviskosimeter - Teil 1: Verfahren nach Höppler (ISO 12058-1:1997)Plastiques - Détermination de la viscosité au moyen d'un viscosimetre a chute de bille - Partie 1: Méthode du tube incliné (ISO 12058-1:1997)Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:1997)83.080.01Polimerni materiali na splošnoPlastics in generalICS:Ta slovenski standard je istoveten z:EN ISO 12058-1:2002SIST EN ISO 12058-1:2003en01-maj-2003SIST EN ISO 12058-1:2003SLOVENSKI
STANDARDSIST EN ISO 9371:1999/AC:2005SIST EN ISO 9371:19991DGRPHãþD



SIST EN ISO 12058-1:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 12058-1September 2002ICS 83.080.01Supersedes EN ISO 9371:1995English versionPlastics - Determination of viscosity using a falling-ballviscometer - Part 1: Inclined-tube method (ISO 12058-1:1997)Plastiques - Détermination de la viscosité au moyen d'unviscosimètre à chute de bille - Partie 1: Méthode du tubeincliné (ISO 12058-1:1997)Kunststoffe - Bestimmung der Viskosität mit einemKugelfallviskosimeter - Teil 1: Verfahren nach Höppler (ISO12058-1:1997)This European Standard was approved by CEN on 19 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 12058-1:2002 ESIST EN ISO 12058-1:2003



EN ISO 12058-1:2002 (E)2ForewordThe text of ISO 12058-1:1997 has been prepared by Technical Committee ISO/TC 61 "Plastics"of the International Organization for Standardization (ISO) and has been taken over asEN ISO 12058-1:2002 by Technical Committee CEN/TC 249 "Plastics", the secretariat of whichis held by IBN.This European Standard shall be given the status of a national standard, either by publication ofan identical text or by endorsement, at the latest by March 2003, and conflicting nationalstandards shall be withdrawn at the latest by March 2003.This document supersedes EN ISO 9371:1995.According to the CEN/CENELEC Internal Regulations, the national standards organizations ofthe following countries are bound to implement this European Standard: Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 12058-1:1997 has been approved by CEN as aEuropean Standard without any modifications.NOTE
Normative references to International Standards are listed in annex ZA (normative).SIST EN ISO 12058-1:2003



EN ISO 12058-1:2002 (E)3Annex ZA(normative)Normative references to international publicationswith their relevant European publicationsThis European Standard incorporates by dated or undated reference, provisions from otherpublications. These normative references are cited at the appropriate places in the text and thepublications are listed hereafter. For dated references, subsequent amendments to or revisions ofany of these publications apply to this European Standard only when incorporated in it byamendment or revision. For undated references the latest edition of the publication referred toapplies (including amendments).NOTE Where an International Publication has been modified by common modifications, indicated by (mod.),the relevant EN/HD applies.PublicationYearTitleEN/HDYearISO 2811-11997Paints and varnishes - Determinationof density - Part 1: PyknometermethodEN ISO 2811-12001SIST EN ISO 12058-1:2003



SIST EN ISO 12058-1:2003



INTERNATIONAL STANDARD IS0 12058-l First edition 1997-04-01 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method Plastiques - DBtermination de la viscosit6 au moyen d’un viscosimktre & chute de bile - Partie I: Mkthode du tube
...