EN ISO 25239-2:2020

Friction stir welding - Aluminium - Part 2: Design of weld joints (ISO 25239-2:2020)

This document specifies design requirements for friction stir weld joints.
In this document, the term "aluminium" refers to aluminium and its alloys.
This document does not apply to friction stir spot welding which is covered by the ISO 18785 series.

Rührreibschweißen - Aluminium - Teil 2: Ausführung der Schweißverbindungen (ISO 25239-2:2020)

Dieses Dokument legt Anforderungen an die Ausführung von rührreibgeschweißten Verbindungen fest.
Der Begriff „Aluminium“ bezieht sich in diesem Dokument auf Aluminium und seine Legierungen.
Dieses Dokument ist nicht für das Rührreibpunktschweißen anzuwenden, das in der Normenreihe ISO 18785 abgedeckt ist.

Soudage par friction-malaxage - Aluminium - Partie 2: Conception des assemblages soudés (ISO 25239-2:2020)

Le présent document spécifie les exigences de conception relatives aux assemblages soudés par friction-malaxage. Dans le présent document, le terme « aluminium » se rapporte à l'aluminium et ses alliages.
Le présent document ne s'applique pas au soudage par points par friction-malaxage, qui est couvert par les normes de la série ISO 18785.

Varjenje z gnetenjem - Aluminij - 2. del: Zasnova zvarnih spojev (ISO 25239-2:2020)

General Information

• Status: Published
• Publication Date: 21-Jul-2020
• Withdrawal Date: 30-Jan-2021
• ICS: 25.160.10 - Welding processes
• ICS: 25.160.40 - Welded joints and welds
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121 - Welding
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 22-Jul-2020
• Completion Date: 22-Jul-2020
• Ref Project: SIST EN ISO 25239-2:2020 - Friction stir welding - Aluminium - Part 2: Design of weld joints (ISO 25239-2:2020)

Relations

• Replaces: EN ISO 25239-2:2011 - Friction stir welding - Aluminium - Part 2: Design of weld joints (ISO 25239-2:2011)
• Effective Date: 29-Jul-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 25239-2:2020
01-november-2020
Nadomešča:
SIST EN ISO 25239-2:2012
Varjenje z gnetenjem - Aluminij - 2. del: Zasnova zvarnih spojev (ISO 25239-2:2020)
Friction stir welding - Aluminium - Part 2: Design of weld joints (ISO 25239-2:2020)
Rührreibschweißen - Aluminium - Teil 2: Ausführung der Schweißverbindungen (ISO
25239-2:2020)
Soudage par friction-malaxage - Aluminium - Partie 2: Conception des assemblages
soudés (ISO 25239-2:2020)
Ta slovenski standard je istoveten z: EN ISO 25239-2:2020
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
25.160.40 Varjeni spoji in vari Welded joints and welds
77.120.10 Aluminij in aluminijeve zlitine Aluminium and aluminium
alloys
SIST EN ISO 25239-2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 25239-2:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 25239-2:2020


EN ISO 25239-2
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2020
EUROPÄISCHE NORM
ICS 25.160.10; 25.160.40 Supersedes EN ISO 25239-2:2011
English Version

Friction stir welding - Aluminium - Part 2: Design of weld
joints (ISO 25239-2:2020)
Soudage par friction-malaxage - Aluminium - Partie 2: Rührreibschweißen - Aluminium - Teil 2: Ausführung
Conception des assemblages soudés (ISO 25239- der Schweißverbindungen (ISO 25239-2:2020)
2:2020)
This European Standard was approved by CEN on 12 July 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 25239-2:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 25239-2:2020
EN ISO 25239-2:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 25239-2:2020
EN ISO 25239-2:2020 (E)
European foreword
This document (EN ISO 25239-2:2020) has been prepared by Technical Committee ISO/TC IIW
"International Institute of Welding" in collaboration with Technical Committee CEN/TC 121 “Welding
and allied processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2021, and conflicting national standards shall
be withdrawn at the latest by January 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 25239-2:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 25239-2:2020 has been approved by CEN as EN ISO 25239-2:2020 without any
modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 25239-2:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 25239-2:2020
INTERNATIONAL ISO
STANDARD 25239-2
Seco
...