EN ISO 9455-5:2020
(Main)Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2020)
Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2020)
This document specifies a qualitative method for assessing the aggressiveness of a flux towards copper.
The test is applicable to all fluxes of type 1 as defined in ISO 9454‑1.
Flussmittel zum Weichlöten - Prüfverfahren - Teil 5: Kupferspiegeltest (ISO 9455-5:2020)
Dieses Dokument legt ein qualitatives Verfahren zur Beurteilung der Flussmittelreaktionsfähigkeit gegenüber Kupfer fest. Die Prüfung ist anwendbar auf alle Flussmittel der Klasse 1 nach ISO 9454 1.
Flux de brasage tendre - Méthodes d'essai - Partie 5: Essai au miroir de cuivre (ISO 9455-5:2020)
Le présent document spécifie une méthode qualitative d'évaluation de l'agressivité d'un flux par rapport au cuivre. Cet essai est applicable à tous les flux de type 1 définis dans l'ISO 9454‑1.
Talila za mehko spajkanje - Preskusne metode - 5. del: Preskus z bakrovim zrcalom (ISO 9455-5:2020)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 9455-5:2020
01-december-2020
Nadomešča:
SIST EN ISO 9455-5:2014
Talila za mehko spajkanje - Preskusne metode - 5. del: Preskus z bakrovim
zrcalom (ISO 9455-5:2020)
Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2020)
Flussmittel zum Weichlöten - Prüfverfahren - Teil 5: Kupferspiegeltest (ISO 9455-5:2020)
Flux de brasage tendre - Méthodes d'essai - Partie 5: Essai au miroir de cuivre (ISO
9455-5:2020)
Ta slovenski standard je istoveten z: EN ISO 9455-5:2020
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
SIST EN ISO 9455-5:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 9455-5:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 9455-5:2020
EN ISO 9455-5
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2020
EUROPÄISCHE NORM
ICS 25.160.50 Supersedes EN ISO 9455-5:2014
English Version
Soft soldering fluxes - Test methods - Part 5: Copper
mirror test (ISO 9455-5:2020)
Flux de brasage tendre - Méthodes d'essai - Partie 5: Flussmittel zum Weichlöten - Prüfverfahren - Teil 5:
Essai au miroir de cuivre (ISO 9455-5:2020) Kupferspiegeltest (ISO 9455-5:2020)
This European Standard was approved by CEN on 12 October 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9455-5:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 9455-5:2020
EN ISO 9455-5:2020 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 9455-5:2020
EN ISO 9455-5:2020 (E)
European foreword
This document (EN ISO 9455-5:2020) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2021, and conflicting national standards shall be
withdrawn at the latest by April 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 9455-5:2014.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 9455-5:2020 has been approved by CEN as EN ISO 9455-5:2020 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 9455-5:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 9455-5:2020
INTERNATIONAL ISO
STANDARD 9455-5
Third edition
2020-10
Soft soldering fluxes — Test
methods —
Part 5:
Copper mirror test
Flux de brasage tendre — Méthodes d'essai —
Partie 5: Essai au miroir de cuivre
Reference number
IS
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.