EN ISO 9455-5:2014
(Main)Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2014)
Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2014)
ISO 9455-5:2014 specifies a qualitative method for assessing the aggressiveness of a flux towards copper. The test is applicable to all fluxes of type 1 as defined in ISO 9454‑1.
Flussmittel zum Weichlöten - Prüfverfahren - Teil 5: Kupferspiegeltest (ISO 9455-5:2014)
Dieser Teil der ISO 9455 legt ein qualitatives Verfahren zur Beurteilung der Flussmittelreaktionsfähigkeit gegenüber Kupfer fest. Die Prüfung ist anwendbar auf alle Flussmittel der Klasse 1 nach ISO 9454-1.
Flux de brasage tendre - Méthodes d'essai - Partie 5: Essai au miroir de cuivre (ISO 9455-5:2014)
l'ISO 9455-5:2104 spécifie une méthode qualitative d'évaluation de l'agressivité d'un flux par rapport au cuivre. Cet essai est applicable à tous les flux de type 1 définis dans l'ISO 9454‑1.
Talila za mehko spajkanje - Preskusne metode - 5. del: Preskus z bakrovim zrcalom (ISO 9455-5:2014)
Standard EN ISO 9455-5 določa kvalitativno metodo za ocenjevanje agresivnosti talil na baker. Ta preskus velja za vsa talila tipa 1 iz standarda ISO 9454-1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2014
1DGRPHãþD
SIST EN 29455-5:1998
Talila za mehko spajkanje - Preskusne metode - 5. del: Preskus z bakrovim
zrcalom (ISO 9455-5:2014)
Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2014)
Flussmittel zum Weichlöten - Prüfverfahren - Teil 5: Kupferspiegeltest (ISO 9455-5:2014)
Flux de brasage tendre - Méthodes d'essai - Partie 5: Essai au miroir de cuivre (ISO
9455-5:2014)
Ta slovenski standard je istoveten z: EN ISO 9455-5:2014
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 9455-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2014
ICS 25.160.50 Supersedes EN 29455-5:1993
English Version
Soft soldering fluxes - Test methods - Part 5: Copper mirror test
(ISO 9455-5:2014)
Flux de brasage tendre - Méthodes d'essai - Partie 5: Essai Flussmittel zum Weichlöten - Prüfverfahren - Teil 5:
au miroir de cuivre (ISO 9455-5:2014) Kupferspiegeltest (ISO 9455-5:2014)
This European Standard was approved by CEN on 28 May 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9455-5:2014 E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 9455-5:2014) has been prepared by Technical Committee ISO/TC 44 "Welding and
allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2015, and conflicting national standards shall be withdrawn at
the latest by January 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 29455-5:1993.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 9455-5:2014 has been approved by CEN as EN ISO 9455-5:2014 without any modification.
INTERNATIONAL ISO
STANDARD 9455-5
Second edition
2014-07-01
Soft soldering fluxes — Test
methods —
Part 5:
Copper mirror test
Flux de brasage tendre — Méthodes d’essai —
Partie 5: Essai au miroir de cuivre
Reference number
ISO 9455-5:2014(E)
©
ISO 2014
ISO 9455-5:2014(E)
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved
ISO 9455-5:2014(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Principle . 1
4 Reagents . 1
5 Apparatus . 2
6 Procedure. 2
6.1 Preparation of the flux test solution . 2
6.2 Preparation of copper mirrors for test . 3
6.3 Determination . 3
7 Assessment and expression of results . 3
8 Test report . 3
ISO 9455-5:2014(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the documen
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.