EN ISO 5801:2008
(Main)Industrial fans - Performance testing using standardized airways (ISO 5801:2007 including Cor 1:2008)
Industrial fans - Performance testing using standardized airways (ISO 5801:2007 including Cor 1:2008)
ISO 5801:2007 deals with the determination of the performance of industrial fans of all types except those designed solely for air circulation e.g. ceiling fans and table fans.
Estimates of uncertainty of measurement are provided and rules for the conversion, within specified limits, of test results for changes in speed, gas handled and, in the case of model tests, size, are given.
Industrieventilatoren - Leistungsmessung auf genormten Prüfständen (ISO 5801:2007 einschließlich Cor 1:2008)
Diese Internationale Norm behandelt die Leistungsmessung von Ventilatoren aller Art, mit Ausnahme von Ventilatoren, die nur zur Luftumwälzung eingesetzt werden, wie z. B. Wand- oder Tischventilatoren.
Vorgesehen sind Abschätzungen zur Messunsicherheit, und es werden innerhalb festgelegter Grenzen Umrechnungsregeln für die Prüfergebnisse bei Drehzahländerungen, Veränderungen des geförderten Gases und, bei Modellversuchen, der Maße gegeben.
Ventilateurs industriels - Essais aérauliques sur circuits normalisés (ISO 5801:2007, Cor 1:2008 inclus)
L'ISO 5801:2007 traite de la détermination des performances des ventilateurs industriels de tous types à l'exception de ceux uniquement conçus pour la circulation de l'air, par exemple les ventilateurs de plafond ou de table.
Des estimations de l'incertitude de mesure sont fournies et des règles pour la conversion, dans des limites spécifiées, des résultats d'essai liés aux variations de vitesse, au gaz transporté, et dans le cas d'essais sur maquette à la taille, sont spécifiées.
Industrijski ventilatorji - Preskušanje lastnosti s standardiziranimi zračnimi cevkami (ISO 5801:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2009
,QGXVWULMVNLYHQWLODWRUML3UHVNXãDQMHODVWQRVWLVVWDQGDUGL]LUDQLPL]UDþQLPL
FHYNDPL ,62
Industrial fans - Performance testing using standardized airways (ISO 5801:2007)
Einführendes Element - Haupt-Element -rrrrr Ergänzendes Element (ISO 5801:2007)
Ventilateurs industriels - Essais aérauliques sur circuits normalisés (ISO 5801:2007)
Ta slovenski standard je istoveten z: EN ISO 5801:2008
ICS:
23.120 =UDþQLNL9HWUQLNL.OLPDWVNH Ventilators. Fans. Air-
QDSUDYH conditioners
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 5801
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2008
ICS 23.120
English Version
Industrial fans - Performance testing using standardized airways
(ISO 5801:2007 including Cor 1:2008)
Ventilateurs industriels - Essais aérauliques sur circuits
normalisés (ISO 5801:2007, Cor 1:2008 inclus)
This European Standard was approved by CEN on 2 October 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5801:2008: E
worldwide for CEN national Members.
Contents Page
Foreword.3
Foreword
The text of ISO 5801:2007 including Cor 1:2008 has been prepared by Technical Committee ISO/TC 117
“Industrial fans” of the International Organization for Standardization (ISO) and has been taken over as EN
ISO 5801:2008 by Technical Committee CEN/TC 156 “Ventilation for buildings” the secretariat of which is held
by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the
latest by April 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 5801:2007 including Cor 1:2008 has been approved by CEN as a EN ISO 5801:2008 without
any modification.
INTERNATIONAL ISO
STANDARD 5801
Second edition
2007-12-15
Industrial fans — Performance testing
using standardized airways
Ventilateurs industriels — Essais aérauliques sur circuits normalisés
Reference number
ISO 5801:2007(E)
©
ISO 2007
ISO 5801:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2007 – All rights reserved
ISO 5801:2007(E)
Contents Page
Foreword. vii
Introduction . viii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 1
4 Symbols and units. 16
4.1 Symbols . 16
4.2 Subscripts . 19
5 General. 19
6 Instruments for pressure measurement. 20
6.1 Barometers . 20
6.2 Manometers. 21
6.3 Damping of manometers. 21
6.4 Checking of manometers. 21
6.5 Position of manometers. 22
7 Determination of average pressure in an airway. 22
7.1 Methods of measurement . 22
7.2 Use of wall tappings . 22
7.3 Construction of tappings . 22
7.4 Position and connections . 23
7.5 Checks for compliance. 23
7.6 Use of Pitot-static tube. 23
8 Measurement of temperature . 24
8.1 Thermometers . 24
8.2 Thermometer location . 24
8.3 Humidity. 24
9 Measurement of rotational speed . 25
9.1 Fan shaft speed. 25
9.2 Acceptable instruments . 25
10 Determination of power input. 25
10.1 Measurement accuracy . 25
10.2 Fan shaft power . 25
10.3 Determination of fan shaft power by electrical measurement . 25
10.4 Impeller power. 26
10.5 Transmission systems . 26
11 Measurement of dimensions and determination of areas. 26
11.1 Flow-measurement devices. 26
11.2 Tolerance on dimensions . 26
11.3 Determination of cross-sectional area . 27
12 Determination of air density, humid gas constant and viscosity . 27
12.1 Density of air in the test enclosure at section x . 27
12.2 Determination of vapour pressure . 28
12.3 Determination of air viscosity . 30
13 Determination of flow rate . 31
13.1 General. 31
ISO 5801:2007(E)
13.2 In-line flowmeters (standard primary devices). 31
13.3 Traverse methods . 32
14 Calculation of test results . 34
14.1 General . 34
14.2 Units . 34
14.3 Temperature. 34
14.4 Mach number and reference conditions. 36
14.5 Fan pressure. 40
14.6 Calculation of stagnation pressure at a reference section of the fan from gauge pressure,
p , measured at a section x of the test duct . 43
ex
14.7 Inlet volume flow rate . 44
14.8 Fan air power and efficiency.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.