Prevailing torque type all-metal hexagon nuts, style 1 - Property classes 5, 8 and 10 (ISO 7719:1997)

Sechskantmuttern mit Klemmteil (Ganzmetallmuttern), Typ 1 - Festigkeitsklasse 5, 8 und 10 (ISO 7719:1997)

Diese Internationale Norm beschreibt die Eigenschaften von Sechskantmuttern mit Klemmteil (Ganzmetallmuttern), Typ 1, mit Gewinde von M5 bis M36, in Produktklasse A für Gewinde bis M 16 und Produktklasse B für Gewinde über M 16 und Festigkeitsklassen 5, 8 und 10. Werden in besonderen Fällen andere Festlegungen benötigt, so sind diese den bestehenden Internationalen Normen zu entnehmen, z.B. ISO 261, ISO 965-2, ISO 2320 und ISO 4759-1.

Ecrous hexagonaux autofreinés tout métal, style 1 - Classes de qualité 5, 8 et 10 (ISO 7719:1997)

La présente Norme internationale prescrit les caractéristiques des écrous hexagonaux autofreinés tout métal, style 1, de filetage M5 à M36 inclus, de grade A pour filetages < M16 et de grade B pour filetages > M16, et de classes de qualité 5, 8 et 10.
NOTE -- Les dimensions des écrous, à l'exception de la dimension hmax′ sont conformes à celles données dans l'ISO 4032. Si d'autres spécifications sont requises, il est recommandé de les choisir dans les Normes internationales existantes, par exemple ISO 261, ISO 965-2, ISO 2320 et ISO 4759-1.

Šestrobe zaščitne matice z deformacijo, tip 1 - Razredi trdnosti 5, 8 in 10 (ISO 7719:1997)

General Information

Status
Withdrawn
Publication Date
31-Oct-1997
Withdrawal Date
18-Dec-2012
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
19-Dec-2012
Completion Date
19-Dec-2012

Relations

Buy Standard

Standard
EN ISO 7719:2001
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sechskantmuttern mit Klemmteil (Ganzmetallmuttern), Typ 1 - Festigkeitsklasse 5, 8 und 10 (ISO 7719:1997)Ecrous hexagonaux autofreinés tout métal, style 1 - Classes de qualité 5, 8 et 10 (ISO 7719:1997)Prevailing torque type all-metal hexagon nuts, style 1 - Property classes 5, 8 and 10 (ISO 7719:1997)21.060.20MaticeNutsICS:Ta slovenski standard je istoveten z:EN ISO 7719:1997SIST EN ISO 7719:2001en01-julij-2001SIST EN ISO 7719:2001SLOVENSKI
STANDARDSIST ISO 7719:19961DGRPHãþD



SIST EN ISO 7719:2001



SIST EN ISO 7719:2001



SIST EN ISO 7719:2001



SIST EN ISO 7719:2001



SIST EN ISO 7719:2001



.AReference numberISO 7719:1997(E)INTERNATIONALSTANDARDISO7719Second edition1997-11-01Prevailing torque type all-metal hexagonnuts, style 1 — Property classes 5, 8 and 10Écrous hexagonaux autofreinés tout métal, style 1 — Classesde qualité 5, 8 et 10SIST EN ISO 7719:2001



ISO 7719:1997(E)©
ISO 1997All rights reserved. Unless otherwise specified, no part of this publication may be reproducedor utilized in any form or by any means, electronic or mechanical, including photocopying andmicrofilm, without permission in writing from the publisher.International Organization for StandardizationCase postale 56 · CH-1211 Genève 20 · SwitzerlandInternetcentral@iso.chX.400c=ch; a=400net; p=iso; o=isocs; s=centralPrinted in SwitzerlandiiForewordISO (the International Organization for Standardization) is a worldwidefederation of national standards bodies (ISO member bodies). The work ofpreparing International Standards is normally carried out through ISOtechnical committees. Each member body interested in a subject for whicha technical committee has been established has the right to be representedon that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISOcollaborates closely with the International Electrotechnical Commission(IEC) on all matters of electrotechnical standardization.Draft International Standards adopted by the technical committees arecirculated to the member bodies for voting. Publication as an InternationalStandard requires approval by at least 75 % of the member bodies castinga vote.International Standard ISO 7719 was prepared by Technical CommitteeISO/TC 2, Fasteners, Subcommittee SC 1, Mechanical properties offasteners.This second edition cancels and replaces the first edition (ISO 7719:1983),which has been technically revised.Annex A of this International Standard is for information only.SIST EN ISO 7719:2001



INTERNATIONAL STANDARD
© ISOISO 7719:1997(E)1Prevailing torque type all-metal hexagon nuts, style 1 —Property classes 5, 8 and 101
ScopeThis International Standard specifies the characteristics of prevailing torque type all-metal hexagon nuts, ofstyle 1, with threads from M5 up to and including M36, in product grade A for threads up to and including M16and product grade B for threads above M16, and with property classes 5, 8 and 10.NOTE —
The dimensions of the nuts with the exception of hmax correspond to those given in ISO 4032.If other specifications are required, they should be selected from existing International Standards, for exampleISO 261, ISO 965-2, ISO 2320 and ISO 4759-1.2
Normative referencesThe following standards contain provisions which, through reference in this text, constitute provisions of thisInternational Standard. At the time of publication, the editions indicated we
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.