Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012)

ISO 7719:2012 specifies the characteristics of prevailing torque type all-metal hexagon regular nuts with threads from M5 up to and including M36, in product grade A for threads up to and including M16 and product grade B for threads above M16, and with property classes 5, 8 and 10.

Sechskantmuttern mit Klemmteil (Ganzmetallmuttern) - Festigkeitsklassen 5, 8 und 10 (ISO 7719:2012)

Diese Internationale Norm legt die Eigenschaften von Sechskantmuttern mit Klemmteil (Ganzmetallmuttern) mit Gewinde M5 bis M36, in Produktklasse A für Gewinde bis M16 und Produktklasse B für Gewinde über M16, und mit Festigkeitsklassen 5, 8 und 10 fest.
ANMERKUNG   Die Maße der Muttern entsprechen den in ISO 4032 angegebenen Maßen, mit Ausnahme des Maßes hmax.
Werden andere Festlegungen benötigt, können diese den bestehenden Internationalen Normen entnommen werden, z. B. ISO 261, ISO 724, ISO 898 2, ISO 965 2, ISO 2320 und ISO 4759 1.

Écrous hexagonaux normaux autofreinés tout métal - Classes de qualité 5, 8 et 10 (ISO 7719:2012)

L'ISO 7719:2012 spécifie les caractéristiques des écrous hexagonaux normaux autofreinés tout métal, de diamètre de filetage M5 à M 36 inclus, de grade A pour les filetages jusqu'à M 16 et de grade B pour les filetages supérieurs à M16, et de classes de qualité 5, 8 et 10.

Šestrobe zaščitne matice z deformacijo - Razredi trdnosti 5, 8 in 10 (ISO 7719:2012)

Ta mednarodni standard določa značilnosti šestrobih zaščitnih matic z deformacijo z navoji od M5 do vključno M36, v razredu izdelave A za navoje do vključno M16 in v razredu izdelave B za navoje nad M16, ter z razredi trdnosti 5, 8 in 10. Če so zahtevane druge specifikacije, jih je mogoče izbrati iz obstoječih mednarodnih standardov, na primer standardov ISO 261, ISO 724, ISO 898-2, ISO 965-2, ISO 2320 in ISO 4759-1.

General Information

Status
Published
Publication Date
18-Dec-2012
Withdrawal Date
29-Jun-2013
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
19-Dec-2012
Completion Date
19-Dec-2012

Relations

Buy Standard

Standard
EN ISO 7719:2014
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2014
1DGRPHãþD
SIST EN ISO 7719:2001
âHVWUREH]DãþLWQHPDWLFH]GHIRUPDFLMR5D]UHGLWUGQRVWLLQ ,62
Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO
7719:2012)
Sechskantmuttern mit Klemmteil (Ganzmetallmuttern) - Festigkeitsklassen 5, 8 und 10
(ISO 7719:2012)
Écrous hexagonaux normaux autofreinés tout métal - Classes de qualité 5, 8 et 10 (ISO
7719:2012)
Ta slovenski standard je istoveten z: EN ISO 7719:2012
ICS:
21.060.20 Matice Nuts
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 7719
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2012
ICS 21.060.20 Supersedes EN ISO 7719:1997
English Version
Prevailing torque type all-metal hexagon regular nuts - Property
classes 5, 8 and 10 (ISO 7719:2012)
Écrous hexagonaux normaux autofreinés tout métal - Sechskantmuttern mit Klemmteil (Ganzmetallmuttern), Typ
Classes de qualité 5, 8 et 10 (ISO 7719:2012) 1 - Festigkeitsklassen 5, 8 und 10 (ISO 7719:2012)
This European Standard was approved by CEN on 3 December 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7719:2012: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 7719:2012) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at
the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 7719:1997.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 7719:2012 has been approved by CEN as a EN ISO 7719:2012 without any modification.
INTERNATIONAL ISO
STANDARD 7719
Third edition
2012-12-15
Prevailing torque type all-metal hexagon
regular nuts — Property classes 5, 8 and 10
Écrous hexagonaux normaux autofreinés tout métal — Classes de
qualité 5, 8 et 10
Reference number
ISO 7719:2012(E)
©
ISO 2012
ISO 7719:2012(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

ISO 7719:2012(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Dimensions . 1
4 Requirements and reference International Standards . 3
5 Designation . 3
Bibliography .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.