EN 12566-3:2005+A1:2009

Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants

This European Standard specifies requirements, test methods, the marking and evaluation of conformity for packaged and/or site assembled domestic wastewater treatment plants (including guest houses and businesses) used for populations up to 50 inhabitants. Small wastewater treatment plants according to this European Standard are used for the treatment of raw domestic wastewater.
It covers plants with tanks made of concrete, steel, PVC-U, Polyethylene (PE), Polypropylene (PP) and Glass Reinforced Polyester (GRP-UP).
The test methods specified in this European Standard establish the performance of the plant, needed to verify its suitability for the end use (see 3.1).
This European Standard applies for small wastewater treatment plants for use buried in the ground where no vehicle loads are applied to the product.
This European Standard applies to plants where all prefabricated components are factory or site-assembled by one manufacturer and which are tested as a whole.
NOTE   In some countries, domestic wastewater treatment plants are followed by other systems to conform to national regulations.

Kleinkläranlagen für bis zu 50 EW - Teil 3: Vorgefertigte und/oder vor Ort montierte Anlagen zur Behandlung von häuslichem Schmutzwasser

Petites installations de traitement des eaux usées jusqu'à 50 PTE - Partie 3: Stations d'épuration des eaux usées domestiques prêtes à l'emploi et/ou assemblées sur site

La présente Norme européenne spécifie les exigences, les méthodes d’essais, le marquage et l’évaluation de la
conformité de stations d’épuration d’eaux usées domestiques prêtes à l’emploi et/ou assemblées sur site, utilisées
pour une population totale équivalente (PTE) jusqu’à 50 habitants (y compris pour des établissements hôteliers et
entreprises). Les petites stations d’épuration dont il est question dans la présente Norme européenne sont utilisées
pour le traitement des eaux usées domestiques brutes.
Elle traite des stations avec réservoirs en béton, acier, PVC-U, polyéthylène (PE) et plastique renforcé de
verre (PRV).
Les méthodes d’essais spécifiées dans la présente Norme européenne établissent les performances de la station,
qui sont requises pour vérifier l’aptitude de la station à l’emploi (voir 3.1).
La présente Norme européenne est applicable aux petites stations d’épuration des eaux usées enterrées à un
emplacement où le produit n’est pas soumis à des charges dues aux véhicules.
La présente Norme européenne est applicable à des stations dont tous les composants sont préfabriqués en usine
ou assemblés sur site par un même fabricant et qui sont soumises aux essais comme un tout.
NOTE Dans certains pays, pour la conformité aux réglementations nationales, les stations d’épuration des eaux usées sont
complétées par d’autres systèmes.

Male čistilne naprave do 50 PE - 3. del: Predizdelane in/ali na mestu postavitve sestavljene čistilne naprave za gospodinjske odplake

General Information

• Status: Withdrawn
• Publication Date: 27-Jan-2009
• Withdrawal Date: 18-Jun-2013
• ICS: 13.060.30 - Sewage water
• Technical Committee: CEN/TC 165 - Waste water engineering
• Drafting Committee: CEN/TC 165/WG 41 - Small type sewage treatment plants (< 50 inhabitants)
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 19-Jun-2013
• Completion Date: 19-Jun-2013
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/118 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on waste water engineering products
• Ref Project: SIST EN 12566-3:2005+A1:2009 - Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants

Relations

• Merged Into: EN 12566-3:2005+A2:2013 - Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants
• Effective Date: 18-Jan-2023
• Merged From: EN 12566-3:2005 - Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kleinkläranlagen für bis zu 50 EW - Teil 3: Vorgefertigte und/oder vor Ort montierte Anlagen zur Behandlung von häuslichem SchmutzwasserPetites installations de traitement des eaux usées jusqu'à 50 PTE - Partie 3: Stations d'épuration des eaux usées domestiques prêtes à l'emploi et/ou assemblées sur siteSmall wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants13.060.30Odpadna vodaSewage waterICS:Ta slovenski standard je istoveten z:EN 12566-3:2005+A1:2009SIST EN 12566-3:2005+A1:2009en,fr,de01-april-2009SIST EN 12566-3:2005+A1:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12566-3:2005+A1
January 2009 ICS 13.060.30 Supersedes EN 12566-3:2005English Version
Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants
Petites installations de traitement des eaux usées jusqu'à 50 PTE - Partie 3: Stations d'épuration des eaux usées domestiques prêtes à l'emploi et/ou assemblées sur site
Kleinkläranlagen für bis zu 50 EW - Teil 3: Vorgefertigte und/oder vor Ort montierte Anlagen zur Behandlung von häuslichem Schmutzwasser This European Standard was approved by CEN on 20 June 2005 and includes Amendment 1 approved by CEN on 15 December 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12566-3:2005+A1:2009: ESIST EN 12566-3:2005+A1:2009

Watertightness test . 20A.1Selection of test . 20SIST EN 12566-3:2005+A1:2009

Treatment efficiency test procedure . 23B.1Responsibility and testing location . 23B.2Plant selection and preliminary evaluation . 23B.2.1General . 23B.2.2Installation and commissioning . 23B.2.3Operation and maintenance procedures during testing . 23B.2.4Data to be monitored . 24B.3Test procedure . 24B.3.1Time for establishment . 24B.3.2Influent characteristics . 24B.3.3Daily flow pattern for testing . 25B.3.4Test procedure . 25B.3.5Influent and effluent samplings . 27B.4Sample analysis . 28B.5Test report . 28Annex C (normative)
Calculation and test methods for structural behaviour . 30C.1General . 30C.2Concrete plant . 30C.2.1Crushing test methods . 30C.2.2Test procedures . 31C.3Polyethylene and polypropylene plant . 34C.3.1Vertical load test .
...