EN 17201:2023
(Main)Construction products: Assessment of release of dangerous substances - Content of inorganic substances - Methods for analysis of aqua regia digests
Construction products: Assessment of release of dangerous substances - Content of inorganic substances - Methods for analysis of aqua regia digests
This document specifies analytical methods for the determination of major, minor and trace elements in aqua regia digests of construction products. It refers to the following 67 elements:
Aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), bismuth (Bi), boron (B), cadmium (Cd), calcium (Ca), cerium (Ce), cesium (Cs), chromium (Cr), cobalt (Co), copper (Cu), dysprosium (Dy), erbium (Er), europium (Eu), gadolinium (Gd), gallium (Ga), germanium (Ge), gold (Au), hafnium (Hf), holmium (Ho), indium (In), iridium (Ir), iron (Fe), lanthanum (La), lead (Pb), lithium (Li), lutetium (Lu), magnesium (Mg), manganese (Mn), mercury (Hg), molybdenum (Mo), neodymium (Nd), nickel (Ni), palladium (Pd), phosphorus (P), platinum (Pt), potassium (K), praseodymium (Pr), rubidium (Rb), rhenium (Re), rhodium (Rh), ruthenium (Ru), samarium (Sm), scandium (Sc), selenium (Se), silicon (Si), silver (Ag), sodium (Na), strontium (Sr), sulphur (S), tellurium (Te), terbium (Tb), thallium (Tl), thorium (Th), thulium (Tm), tin (Sn), titanium (Ti), tungsten (W), uranium (U), vanadium (V), ytterbium (Yb), yttrium (Y), zinc (Zn), and zirconium (Zr).
The methods in this document are applicable to construction products.
NOTE Construction products include e.g. mineral-based products (S); bituminous products (B); metals (M); wood-based products (W); plastics and rubbers (P); sealants and adhesives (A); paints and coatings (C), see also CEN/TR 16045.
The selection of analytical methods to be applied is based on the required sensitivity of the method, which is provided for all combinations of substance and analytical procedure.
Bauprodukte: Bewertung der Freisetzung von gefährlichen Stoffen - Gehalt an anorganischen Stoffen - Verfahren zur Analyse von Königswasseraufschlusslösungen
Dieses Dokument legt die Analyseverfahren für die Bestimmung von Haupt-, Neben und Spurenelementen in Königswasseraufschlusslösungen von Bauprodukten fest. Sie bezieht sich auf die folgenden 67 Elemente:
Aluminium (Al), Antimon (Sb), Arsen (As), Barium (Ba), Beryllium (Be), Bismut (Bi), Blei (Pb), Bor (B), Cadmium (Cd), Calcium (Ca), Cäsium (Cs), Cer (Ce), Chrom (Cr), Cobalt (Co), Dysprosium (Dy), Eisen (Fe), Erbium (Er), Europium (Eu), Gadolinium (Gd), Gallium (Ga), Germanium (Ge), Gold (Au), Hafnium (Hf), Holmium (Ho), Indium (In), Iridium (Ir), Kalium (K), Kupfer (Cu), Lanthan (La), Lithium (Li), Lutetium (Lu), Magnesium (Mg), Mangan (Mn), Molybdän (Mo), Natrium (Na), Neodym (Nd), Nickel (Ni), Palladium (Pd), Phosphor (P), Platin (Pt), Praseodym (Pr), Quecksilber (Hg), Rhenium (Re), Rhodium (Rh), Rubidium (Rb), Ruthenium (Ru), Samarium (Sm), Scandium (Sc), Schwefel (S), Selen (Se), Silber (Ag), Silicium (Si), Strontium (Sr), Tellur (Te), Terbium (Tb), Thallium (Tl), Thorium (Th), Thulium (Tm), Titan (Ti), Uran (U), Vanadium (V), Wolfram (W), Ytterbium (Yb), Yttrium (Y), Zink (Zn), Zinn (Sn) und Zirconium (Zr).
Die in diesem Dokument beschriebenen Verfahren sind für Bauprodukte geeignet.
ANMERKUNG Bauprodukte umfassen z. B. mineralische Produkte (S), bituminöse Produkte (B), Metalle (M), Holzprodukte (W), Kunststoffe und Gummi (P), Dichtstoffe und Kleber (A), Farben und Beschichtungen (C), siehe auch CEN/TR 16045.
Die Auswahl der zu verwendenden Analyseverfahren beruht auf der erforderlichen Sensitivität des Verfahrens, die für jede Stoff-Analyseverfahren-Kombination angegeben wird.
Produits de construction : Évaluation du relargage de substances dangereuses - Teneur en substances inorganiques - Méthodes d’analyse de digestats obtenus par digestion à l’eau régale
Le présent document spécifie les méthodes d'analyse pour la détermination d'éléments majeurs, mineurs et en traces dans les digestats de produits de construction obtenus par digestion à l'eau régale. Il concerne les 67 éléments suivants :
aluminium (Al), antimoine (Sb), arsenic (As), baryum (Ba), béryllium (Be), bismuth (Bi), bore (B), cadmium (Cd), calcium (Ca), cérium (Ce), césium (Cs), chrome (Cr), cobalt (Co), cuivre (Cu), dysprosium (Dy), erbium (Er), europium (Eu), gadolinium (Gd), gallium (Ga), germanium (Ge), or (Au), hafnium (Hf), holmium (Ho), indium (In), iridium (Ir), fer (Fe), lanthane (La), plomb (Pb), lithium (Li), lutécium (Lu), magnésium (Mg), manganèse (Mn), mercure (Hg), molybdène (Mo), néodyme (Nd), nickel (Ni), palladium (Pd), phosphore (P), platine (Pt), potassium (K), praséodyme (Pr), rubidium (Rb), rhénium (Re), rhodium (Rh), ruthénium (Ru), samarium (Sm), scandium (Sc), sélénium (Se), silicium (Si), argent (Ag), sodium (Na), strontium (Sr), soufre (S), tellure (Te), terbium (Tb), thallium (Tl), thorium (Th), thulium (Tm), étain (Sn), titane (Ti), tungstène (W), uranium (U), vanadium (V), ytterbium (Yb), yttrium (Y), zinc (Zn) et zirconium (Zr).
Les méthodes décrites dans le présent document s'appliquent aux produits de construction.
NOTE Les produits de construction comprennent, par exemple, les produits à base minérale (S), les produits bitumineux (B), les métaux (M), les produits à base de bois (W), les plastiques et caoutchoucs (P), les matériaux d'étanchéité et adhésifs (A), les peintures et revêtements (C) ; voir également le CEN/TR 16045.
Le choix des méthodes d'analyse à appliquer dépend de la sensibilité requise de chacune des méthodes, sensibilité donnée pour toutes les combinaisons substance - mode opératoire analytique.
Gradbeni proizvodi - Ocenjevanje sproščanja nevarnih snovi - Vsebnost anorganskih snovi - Metode za analizo po razklopu z zlatotopko
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17201:2024
01-april-2024
Nadomešča:
SIST-TS CEN/TS 17201:2019+AC:2019
Gradbeni proizvodi - Ocenjevanje sproščanja nevarnih snovi - Vsebnost
anorganskih snovi - Metode za analizo po razklopu z zlatotopko
Construction products - Assessment of release of dangerous substances - Content of
inorganic substances - Methods for analysis of aqua regia digests
Bauprodukte - Bewertung der Freisetzung von gefährlichen Stoffen - Gehalt an
anorganischen Stoffen - Verfahren zur Analyse von Königswasseraufschlusslösungen
Produits de construction - Évaluation du relargage de substances dangereuses - Teneur
en substances inorganiques - Méthodes d’analyse de digestats obtenus par digestion à
l’eau régale
Ta slovenski standard je istoveten z: EN 17201:2023
ICS:
13.020.99 Drugi standardi v zvezi z Other standards related to
varstvom okolja environmental protection
91.100.01 Gradbeni materiali na Construction materials in
splošno general
SIST EN 17201:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17201:2024
---------------------- Page: 2 ----------------------
SIST EN 17201:2024
EN 17201
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2023
EUROPÄISCHE NORM
ICS 91.100.01 Supersedes CEN/TS 17201:2018+AC:2018
English Version
Construction products: Assessment of release of
dangerous substances - Content of inorganic substances -
Methods for analysis of aqua regia digests
Produits de construction : Évaluation du relargage de Bauprodukte: Bewertung der Freisetzung von
substances dangereuses - Teneur en substances gefährlichen Stoffen - Gehalt an anorganischen Stoffen
inorganiques - Méthodes d'analyse de digestats - Verfahren zur Analyse von
obtenus par digestion à l'eau régale Königswasseraufschlusslösungen
This European Standard was approved by CEN on 14 August 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17201:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17201:2024
EN 17201:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Abbreviations . 7
5 Sample pre-treatment . 8
6 Selection of suitable analytical test method . 8
6.1 Table of test methods . 8
6.2 General validati
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.