59.120.40 - Knitting machines

2014-09-30: correction - Draft only available 2014-08-27 (see ISO notification in dataservice on 2014-09-30).

2014-09-30: correction - Draft only available 2014-08-27 (see ISO notification in dataservice on 2014-09-30).

2014-09-30: correction - Draft only available 2014-08-27 (see ISO notification in dataservice on 2014-09-30).
2014-06-24: Draft for // ENQ received at ISO/CS ( see ISO notification in dataservice on 2014-06-24).

2013-08-21 EMA: Draft for // vote received in ISO/CS (see notification of 2013-08-20 in dataservice).
2012-11-08 GVN: Draft for // ENQ available at ISO/CS (see notification in dataservice on 2012-11-07)

This Part 5 of the standard is a complement to Part 1 and specifies, together with it, the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by different types of spinning preparatory and spinning machines. It is applicable to engineering methods (grade 2) and survey methods (grade 3) defined in the standards referred to. It concerns machines as listed in ISO 2544 for: - warping, - beaming, - sizing.

ISO 12912:2014 establishes a vocabulary of terms and a system of classification for circular knitting machines used in the textile industry for the production of weft-knitted fabrics.

ISO 11676:2014 defines terms and marking of pattern disks and patterns chains for warp knitting machines.

This Part 5 of the standard is a complement to Part 1 and specifies, together with it, the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by different types of spinning preparatory and spinning machines. It is applicable to engineering methods (grade 2) and survey methods (grade 3) defined in the standards referred to. It concerns machines as listed in ISO 2544 for: - warping, - beaming, - sizing.

This Part 5 of the standard is a complement to Part 1 and specifies, together with it, the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by different types of spinning preparatory and spinning machines. It is applicable to engineering methods (grade 2) and survey methods (grade 3) defined in the standards referred to. It concerns machines as listed in ISO 2544 for: - warping, - beaming, - sizing.

ISO 8121:2007 specifies the minimum information for the nameplates on knitting machines used in the textile industry.

ISO 8188:2007 specifies the pitches for knitting machines used in the textile industry.

ISO 13990-2:2006 specifies the connecting dimensions for the mounting and electrical installation of yarn feeders and yarn control devices, as defined in ISO13990-1, for knitting machines.

ISO 13990-1:2006 establishes a vocabulary of basic terms relating to yarn feeders and yarn control of single thread for knitting machines.

ISO 13990-3:2006 specifies the dimensions of multi-wire connecting cable and interconnection cable of low voltage for the electrical installation of yarn feeders and yarn control devices according to ISO 13990-2.

ISO 7839:2005 establishes a vocabulary of terms used in relation to knitting machines and accessories used in the knitting industry. It classifies these terms according to main characteristic and customary machine type.

ISO 11675:2005 establishes a vocabulary and system of classification for weaving machines used in the textile industry for the production of woven fabrics by the weaving technique, i.e. by interlacing of two (or more) systems of parallel threads, and machines with hybrid forming methods.

ISO 10223:2005 specifies the designation and the numbering of guide bars for flat warp knitting machines.

This part of ISO 11111 is intended for use by any person concerned with the safety of textile machinery, for example, textile machinery designers, manufacturers, users, systems integrators, safety experts. This part is applicable to machinery plant and related equipment intended to be used for the warping, beaming, sizing, size preparation and storage of warp and cloth beams.

ISO 11111-5:2005, taken together with ISO 11111-1, specifies significant hazards and corresponding safety requirements and/or measures for preparatory machinery to weaving and knitting. It is applicable to all machinery, plant and related equipment intended to be used for the warping, beaming, sizing, size preparation and storage of warp and cloth beams.

ISO 11111-6:2005, taken together with ISO 11111-1, specifies significant hazards and corresponding safety requirements and/or measures for fabric manufacturing machinery. It is applicable to all machinery, plant and related equipment intended to be used for weaving, knitting and tufting.

ISO 11111-5:2005, taken together with ISO 11111-1, specifies significant hazards and corresponding safety requirements and/or measures for preparatory machinery to weaving and knitting. It is applicable to all machinery, plant and related equipment intended to be used for the warping, beaming, sizing, size preparation and storage of warp and cloth beams.

ISO 11111-6:2005, taken together with ISO 11111-1, specifies significant hazards and corresponding safety requirements and/or measures for fabric manufacturing machinery. It is applicable to all machinery, plant and related equipment intended to be used for weaving, knitting and tufting.

ISO 8640-2:2004 establishes a vocabulary of terms related to warp let-off, fabric take-up and batching parts on flat warp knitting machines: yarn carriers, yarn braking devices, yarn delivery devices, yarn guiding and tensioning devices, fabric take-up devices and fabric batching and folding devices.

ISO 8640-1:2004 establishes a vocabulary of terms related to the basic structures and knitting elements of flat warp knitting machines: their types, sides and dimensions, frame, knitting elements and driving mechanisms for those elements, units, bars and rails.

ISO 8122:2003 specifies the usual number of needles for single-face, double-face and "links-links" circular knitting machines of large nominal diameter, in terms of the needle pitch or gauge E and the machine nominal diameter, and is able to be used as a basis for the comparison of fabrics knitted on these machines. It is not applicable to circular knitting machines with a selection of single needles.

ISO 8117:2003 specifies the nominal diameters of circular knitting machines and the numerical designations corresponding to the size of the machines. It is applicable to small- and large-diameter circular knitting machines and to sinker machines.

This Part 5 of the standard is a complement to Part 1 and specifies, together with it, the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by different types of spinning preparatory and spinning machines. It is applicable to engineering methods (grade 2) and survey methods (grade 3) defined in the standards referred to. It concerns machines as listed in ISO 2544 for: - warping, - beaming, - sizing.

This part of ISO 8640 defines terms related to the following types of patterning device used on flat warp knitting machines: lapping devices for warp ends; patterning presser devices; fall plate patterning devices; yarn let-off and yarn tensioning patterning devices; needle bar stopping devices; weft insertion devices; take-up patterning devices.

Defines the terms related to the technology of stitch bonding machines and stitch bonding devices fitted to tricot machines and Raschel machines for the production of textiles.

Gives 106 terms (names only) in English, French, Russian, German, and Chinese including a characterizing figure.

This part of ISO 8119 gives, in English, French and Russian (in the annex in German), the terminolgy relating to bearded needles. Bearded needles are a type of knitting element. Gives a definition of these needles. Completed by corresponding illustrations.

This part of ISO 8119 gives, in English, French and Russian (in the annex in German), the terminolgy relating to latch-type needles. Includes a definition of latch-type needle. Completed by corresponding illustrations.

Defines basic terms relating to yarn feeders for knitting machines.

Specifies appropriate dimensions for shank widths and hook heights of latch needles used in the knitting industry.

Defines the terms and symbols related to chain links for warp knitting maschines.

Defines the terms related to the technology of flatbed knitting machines. The figures illustrate the working principles of the various combinations. They do not represent the only, or even the most common, arrangement.

Numbering is in Arabic figures. Classification conforms to ISO 7839:1984 and the side designation to ISO 8640-1:1990.