EN 15377-2:2008

Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 2: Design, dimensioning and installation

This European Standard is applicable to water based surface heating and cooling systems in buildings as defined in EN 15377-1.
Physiological limitations are taken into account when specifying the maximum and minimum surface temperature. The design is based on performance characteristic curves and limit curves calculated in accordance with EN 15377-1 and EN 1264.
Design considerations for heating and cooling systems are specified.

Heizungsanlagen in Gebäuden - Planung von eingebetteten Flächenheiz- und -kühlsystemen mit Wasser als Arbeitsmedium - Teil 2: Planung, Auslegung und Installation

Dieses Dokument gilt für eingebettete Flächenheiz  und  kühlsysteme mit Wasser als Arbeitsmedium in Gebäuden nach den Definitionen in EN 15377-1 dieser Norm.
Bei der Festlegung der Höchst- und Tiefsttemperaturen der Oberfläche werden physiologische Ein¬schränkungen berücksichtigt. Die Planung basiert auf den nach EN 15377-1 dieser Norm und nach EN 1264 berechneten Leistungskennlinien und Grenzkurven.
Planungsgesichtspunkte für Heiz  und Kühlsystemen werden angegeben.

Systèmes de chauffage dans les bâtiments - Conception des systèmes de chauffage et refroidissement par le sol, le mur et le plafond - Design, dimensionnement et installation

Ogrevalni sistemi v stavbah - Načrtovanje vodnih sistemov za ogrevanje in hlajenje, vgrajenih v gradbeno konstrukcijo - 2. del: Načrtovanje, dimenzioniranje in vgradnja

General Information

• Status: Withdrawn
• Publication Date: 24-Jun-2008
• Withdrawal Date: 01-Sep-2009
• ICS: 91.140.10 - Central heating systems
• ICS: 91.140.30 - Ventilation and air-conditioning systems
• Technical Committee: CEN/TC 228 - Heating systems in buildings
• Drafting Committee: CEN/TC 228/WG 5 - Heating Systems in Buildings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 02-Sep-2009
• Completion Date: 02-Sep-2009
• Ref Project: SIST EN 15377-2:2008 - Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 2: Design, dimensioning and installation

Relations

• Replaced By: EN 1264-4:2009 - Water based surface embedded heating and cooling systems - Part 4: Installation
• Effective Date: 08-Jun-2022
• Replaced By: EN 1264-3:2009 - Water based surface embedded heating and cooling systems - Part 3: Dimensioning
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Heizungssysteme in Gebäuden - Planung von eingebetteten Flächenheiz-und -kühlsystemen mit Wasser als Arbeitsmedium - Teil 2 : Planung, Auslegung und InstallationConception des systemes de chauffage et refroidissement par le sol, le mur et le plafond - Partie 2 : Conception, dimensionnement et InstallationHeating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 2: Design, dimensioning and installation91.140.10Sistemi centralnega ogrevanjaCentral heating systemsICS:Ta slovenski standard je istoveten z:EN 15377-2SIST EN 15377-2:2008en,de01-december-2008SIST EN 15377-2:2008SLOVENSKI
STANDARD



SIST EN 15377-2:2008



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15377-2June 2008ICS 91.140.10; 91.140.30 English VersionHeating systems in buildings - Design of embedded water basedsurface heating and cooling systems - Part 2: Design,dimensioning and installationSystèmes de chauffage dans les bâtiments - Conceptiondes systèmes de chauffage et refroidissement par le sol, lemur et le plafond - Design, dimensionnement et installationHeizungsanlagen in Gebäuden - Planung von eingebettetenFlächenheiz- und -kühlsystemen mit Wasser alsArbeitsmedium - Teil 2: Planung, Auslegung undInstallationThis European Standard was approved by CEN on 22 May 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15377-2: ESIST EN 15377-2:2008



EN 15377-2:2008 (E) 2 Contents Page Foreword.3 Introduction.5 1 Scope.6 2 Normative references.6 3 Terms, definitions, symbols and units.6 4 Basic principles.6 4.1 Heating or cooling medium differential temperature.6 4.2 Performance characteristic curve.7 4.3 Field of system characteristic curves.7 4.4 Limit curves.7 5 Boundary conditions and limits.10 5.1 Supply pipes to adjacent rooms.10 5.2 Backing thermal insulation.10 6 Design.12 6.1 Design heat flow intensity.12 6.2 Required length of th
...