Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria

This European Standard specifies the requirements relating to safety of persons and property (but not goods
in storage) and the local and global environment for:
a) stationary and mobile refrigerating systems of all sizes, including heat;
b) secondary cooling or heating systems;
c) location of these refrigerating systems.
NOTE 1 For secondary heating or cooling systems charged with any refrigerants listed in Annex E the charge
limitations of part 1 (Annex C) apply.
For refrigerating systems with a limited mass of refrigerant only some of the parts and clauses are
applicable. The exceptions are defined in the scope and the clauses of each part of EN 378.
This European Standard is not applicable to refrigerating systems with air or water as refrigerant.
Systems using refrigerants other than those listed in Annex E are not covered by this European Standard as
long as a safety class is not assigned.
NOTE 2 For the safety classification of refrigerant fluids not included in Annex E, see Annex F.
This European Standard covers the hazards mentioned in the introduction.

Kälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante Anforderungen - Teil 1: Grundlegende Anforderungen, Begriffe, Klassifikationen und Auswahlkriterien

Diese Europäische Norm legt die Anforderungen für die Sicherheit von Personen und Sachen (nicht jedoch für eingelagerte Güter) und für die lokale und globale Umwelt fest:
a)   stationäre und ortsveränderliche Kälteanlagen aller Größen, einschließlich Wärmepumpen;
b)   indirekte Kühl- oder Heizsysteme;
c)   den Aufstellungsort dieser Kälteanlagen.
ANMERKUNG 1      Bei indirekten Kühl- oder Heizsystemen, die mit Kältemitteln nach Anhang E befüllt sind, gelten die Grenzwerte für die Kältemittel-Füllmenge nach diesem Teil 1 (Anhang C).
Für Kälteanlagen mit einer begrenzten Kältemittel Füllmenge sind nur einige Teile und Abschnitte anzuwenden. Die Ausnahmen sind im Anwendungsbereich und in den Abschnitten der einzelnen Teile der EN 378 festgelegt.
Diese Europäische Norm gilt nicht für Kälteanlagen mit Luft oder Wasser als Kältemittel. Kälteanlagen mit
anderen als in Anhang E aufgeführten Kältemitteln sind nicht Gegenstand dieser Europäischen Norm, sofern sie keiner Sicherheitsgruppe zugeordnet sind.
ANMERKUNG 2      Klassifikation von nicht in Anhang E enthaltenen Kältemitteln im Hinblick auf die Sicherheit, siehe
Anhang F.
Diese Europäische Norm befasst sich mit den in der Einleitung aufgeführten Gefährdungen.
Diese Europäische Norm gilt für neue Kälteanlagen sowie für Änderungen an bestehenden Kälteanlagen, wenn die Art des Kältemittels gewechselt oder Druckbehälter ausgetauscht werden. Der Teil, der sich mit Instandhaltung, Instandsetzung, Betrieb, Rückgewinnung, Wiederverwendung und Entsorgung befasst, gilt außerdem für bereits bestehende Anlagen. Die für bestehende Kälteanlagen Verantwortlichen sollten die sicherheitstech¬nischen und umweltrelevanten Aspekte dieser Europäischen Norm beachten und die weitergehenden Anforderungen erfüllen, soweit dies in vernünftigem Rahmen möglich ist.
Die Richtlinie 94/9/EG für Geräte und Schutzsysteme zur bestimmungsgemäßen Verwendung in explosionsgefährdeten Bereichen kann bei Maschinen oder Bauteilen nach dieser Europäischen Norm

Systèmes de réfrigération et pompes à chaleur - Exigences de sécurité et d'environnement - Partie 1 : Exigences de base, définitions, classification et critères de choix

La présente Norme européenne spécifie les exigences relatives à la sécurité des personnes et des biens
(mais pas des marchandises en stock) et de l’environnement local et de l’environnement en général pour :
a) les systèmes de réfrigération mobiles et fixes de toutes tailles, incluant les pompes à chaleur ;
b) les systèmes de refroidissement ou de chauffage secondaires ;
c) les emplacements de ces systèmes de réfrigération.
NOTE 1 Pour les systèmes de refroidissement ou de chauffage secondaires chargés en fluide frigorigène listé en
Annexe E, les limitations de charge de la partie 1 (Annexe C) s’appliquent.
Pour les systèmes de réfrigération de masse limitée de fluide frigorigène, seuls quelques parties et articles
s’appliquent. Les exceptions sont définies dans les domaine d’application et articles de chaque partie de
l'EN 378.
La présente Norme européenne n’est pas applicable aux systèmes de réfrigération qui utilisent l’air ou l’eau
comme fluide frigorigène. Les systèmes utilisant des fluides frigorigènes autres que ceux énoncés dans
l’Annexe E ne sont pas couverts par la présente Norme européenne aussi longtemps qu’une classe de
sécurité ne leur sera pas attribué.
NOTE 2 Pour la classification de sécurité de fluides frigorigènes non listés en annexe E, voir l’Annexe F.
La présente Norme européenne couvre les risques mentionnés dans l’introduction.
La présente Norme européenne est applicable aux systèmes de réfrigération neufs et aux modifications des
systèmes de réfrigération existants dans le cas où le groupe du fluide frigorigène aurait changé ou le récipient
sous pression serait remplacé. La partie traitant de la maintenance, la réparation, le fonctionnement, la
récupération, la réutilisation et la mise au rebut s’applique aussi aux systèmes existants. I

Hladilni sistemi in toplotne črpalke - Varnostnotehnične in okoljevarstvene zahteve - 1. del: Osnovne zahteve, definicije, razvrstitve in kriteriji za izbiro

General Information

Status
Withdrawn
Publication Date
19-Feb-2008
Withdrawal Date
14-Dec-2010
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
15-Dec-2010
Completion Date
15-Dec-2010

Relations

Buy Standard

Standard
EN 378-1:2008
English language
64 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteriaSystèmes de réfrigération et pompes à chaleur - Exigences de sécurité et d'environnement - Partie 1 : Exigences de base, définitions, classification et critères de choixKälteanlagen und Wärmepumpen - Sicherheitstechnische und umweltrelevante Anforderungen - Teil 1: Grundlegende Anforderungen, Begriffe, Klassifikationen und AuswahlkriterienTa slovenski standard je istoveten z:EN 378-1:2008SIST EN 378-1:2008en,fr,de27.20027.08001.040.27ICS:SIST EN 378-1:2000/A1:2004SIST EN 378-1:20001DGRPHãþDSLOVENSKI
STANDARDSIST EN 378-1:200801-april-2008







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 378-1February 2008ICS 01.040.27; 27.080; 27.200Supersedes EN 378-1:2000
English VersionRefrigerating systems and heat pumps - Safety andenvironmental requirements - Part 1: Basic requirements,definitions, classification and selection criteriaSystèmes de réfrigération et pompes à chaleur - Exigencesde sécurité et d'environnement - Partie 1 : Exigences debase, définitions, classification et critères de choixKälteanlagen und Wärmepumpen - Sicherheitstechnischeund umweltrelevante Anforderungen - Teil 1: GrundlegendeAnforderungen, Begriffe, Klassifikationen undAuswahlkriterienThis European Standard was approved by CEN on 13 October 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 378-1:2008: E



EN 378-1:2008 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.7 2 Normative references.7 3 Definitions.7 3.1 Refrigerating systems.8 3.2 Occupancies, localities.9 3.3 Pressures.10 3.4 Components of refrigerating systems.11 3.5 Piping and joints.13 3.6 Safety accessories.14 3.7 Fluids.16 3.8 Miscellaneous.17 4 Classification.18 4.1 Refrigerat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.