Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked - Bar for forged fasteners - D ≤ 50 mm - 1 550 MPa ≤ Rm ≤ 1 830 MPa

This document specifies the requirements relating to:
Heat resisting alloy NI-PH2601
Solution treated and cold worked
Bar for forged fasteners
D ≤ 50 mm
1 550 MPa ≤ Rm ≤ 1 830 MPa
for aerospace applications.

Luft‑ und Raumfahrt - Hochwarmfeste Legierung NI‑PH2601 - Lösungsgeglüht und kaltverfestigt - Stange für geschmiedete Verbindungselemente - D ≤ 50 mm - 1 550 MPa ≤ Rm ≤ 1 830 MPa

Dieses Dokument legt die Anforderungen an:
Hochwarmfeste Legierung NI-PH2601
Lösungsgeglüht und kaltverfestigt
Stange für geschmiedete Verbindungselemente
D ≤ 50 mm
1 550 MPa ≤ Rm ≤ 1 830 MPa
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Alliage résistant à chaud NI-PH2601 - Mis en solution et écroui - Barre pour éléments de fixation forgés - D ≤ 50 mm - 1 550 MPa ≤ Rm ≤ 1 830 MPa

Le présent document spécifie les exigences relatives à :
Alliage résistant à chaud NI-PH2601
Mis en solution et écroui
Barre pour éléments de fixation forgés D ≤ 50 mm
1 550 MPa ≤ Rm ≤ 1 830 MPa
pour applications aérospatiales.

Aeronavtika - Toplotno odporna zlitina NI-PH2601 - Topilno žarjena in hladno preoblikovana - Palice za kovane vezne elemente - D ≤ 50 mm - 1550 MPa ≤ Rm ≤ 1830 MPa

Ta standard določa zahteve, ki se navezujejo na: toplotno odporno zlitino NI-PH 2601, topilno žarjena in hladno preoblikovana, palice za kovane vezne elemente D ≤ 50 mm, 1550 MPa ≤ Rm ≤ 1830 MPa.

General Information

Status
Published
Publication Date
29-Apr-2020
Withdrawal Date
30-Jul-2020
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Jan-2020
Completion Date
15-Jan-2020

Buy Standard

Standard
EN 3666:2020
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3666:2020
01-marec-2020
Aeronavtika - Toplotno odporna zlitina NI-PH2601 - Topilno žarjena in hladno
preoblikovana - Palice za kovane vezne elemente - D ≤ 50 mm - 1550 MPa ≤ Rm ≤
1830 MPa

Aerospace series - Heat resisting alloy NI-PH2601 - Solution treated and cold worked -

Bar for forged fasteners - D ≤ 50 mm - 1 550 MPa ≤ Rm ≤ 1 830 MPa
Luft- und Raumfahrt - Hochwarmfeste Legierung NI-PH2601 - Lösungsgeglüht und

kaltverfestigt - Stangen zum Stauchen für Verbindungselemente - D ≤ 50 mm - 1 550

MPa ≤ Rm ≤ 1 830 MPa

Série aérospatiale - Alliage résistant à chaud NI-PH2601 - Mis en solution et écroui -

Barres pour éléments de fixation forgés - D ≤ 50 mm - 1 550 MPa ≤ Rm ≤ 1 830 MPa
Ta slovenski standard je istoveten z: EN 3666:2020
ICS:
49.025.99 Drugi materiali Other materials
SIST EN 3666:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 3666:2020
---------------------- Page: 2 ----------------------
SIST EN 3666:2020
EN 3666
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2020
EUROPÄISCHE NORM
ICS 49.025.99
English Version
Aerospace series - Heat resisting alloy NI-PH2601 -
Solution treated and cold worked - Bar for forged fasteners
- D ≤ 50 mm - 1 550 MPa ≤ Rm ≤ 1 830 MPa

Série aérospatiale - Alliage résistant à chaud NI- Luft- und Raumfahrt - Hochwarmfeste Legierung NI-

PH2601 - Mis en solution et écroui - Barre pour PH2601 - Lösungsgeglüht und kaltverfestigt - Stange

éléments de fixation forgés - D ≤ 50 mm - 1 550 MPa ≤ für geschmiedete Verbindungselemente - D ≤ 50 mm -

Rm ≤ 1 830 MPa 1 550 MPa ≤ Rm ≤ 1 830 MPa
This European Standard was approved by CEN on 14 July 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3666:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3666:2020
EN 3666:2020 (E)
Contents Page

European foreword ...................................................................................................................................................... 3

Introduction .................................................................................................................................................................... 4

1 Scope .................................................................................................................................................................... 5

2 Normative references .................................................................................................................................... 5

3 Terms and definitions ................................................................................................................................... 5

4 Requirements ................................................................................................................................................... 5

Bibliography .................................................................................................................................................................... 8

---------------------- Page: 4 ----------------------
SIST EN 3666:2020
EN 3666:2020 (E)
European foreword

This document (EN 3666:2020) has been prepared by the Aerospace and Defence Industries Association

of Europe — Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this Standard has

received the approval of the National Associations and the Official Services of the member countries of

ASD, prior to its presentation to CEN.

This document shall be given the status of a national standard, either by publication of an identical text

or by endorsement, at the latest by July 2020, and conflicting national standards shall be withdrawn at

the latest by July 2020.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

According to the CEN-CENELE
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.