EN 2103-1:1991
(Main)Aerospace series - Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specifications - Part 1: General requirements
Aerospace series - Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specifications - Part 1: General requirements
This standard specifies the general requirements for the manufacture, inspection and testing of steel, nickel base or cobalt base alloy remelting stock and castings. Particular requirements applicable to remelting stock and castings are defined in EN 2103-2 and EN 2103-3 respectively. Unless otherwise specified on the drawing, order or inspection schedule, the reference to EN 2103 only defines one quality level which is quality level 2 in table 4 or5 of EN 2103-3.
Luft- und Raumfahrt - Vormaterial und Gußstücke aus Stahl, Nickel- und Kobaltlegierungen - Teil 1: Allgemeine Anforderungen
Diese Norm legt die allgemeinen Anforderungen an Herstellung und Prüfung von Vormaterial und Gussstücken aus Stahl, Nickel- und Kobaltlegierung fest. Die besonderen Anforderungen an Vormaterial und Gussstücke sind in EN 2103-2 bzw. in EN 2103-3 festgelegt. Wenn in der Zeichnung, Bestellung oder Prüfanweisung nichts anderes angegeben ist, bedeutet die Verweisung auf EN 2103 eine Qualitätslage, die in Tabelle 4 oder 5 der EN 2103-3 als Qualitätslage 2 festgelegt ist.
Série aérospatiale - Produits pour refusion et pièces moulées en acier et alliages base nickel et base cobalt - Spécification technique - Partie 1: Exigences générales
La présente norme définit les exigences générales de fabrication, de contrôle et d'essais applicables aux produits pour refusion et aux pièces moulées en acier, alliages base nickel et base cobalt. Les exigences particulières appliquables aux produits pour refusion, aux pièces types et de série sont définies respectivement dans EN 2103-2 et EN 2103-3. Sauf indication contraire du dessin, de la commande ou de la fiche d'essais, la seule référence à EN 2103 définit un niveau de qualité correspondant au niveau de qualité 2 du tableau 4 ou 5 de EN 2103-3.
Aerospace series - Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specifications - Part 1: General requirements
General Information
Overview
EN 2103-1:1991 - part of the CEN aerospace series - defines the general requirements for the manufacture, inspection and testing of remelting stock and castings made from steel, nickel‑base and cobalt‑base alloys. This Part 1 document provides the overarching technical specifications that apply across remelting stock and casting products; more specific provisions are given in EN 2103-2 and EN 2103-3. Where a drawing, order or inspection schedule does not specify otherwise, a plain reference to EN 2103 indicates quality level 2 (see table 4 or 5 of EN 2103-3).
Key topics
EN 2103-1:1991 establishes the foundational requirements that suppliers and manufacturers must address. Key technical topics include:
- Scope and definitions relevant to remelting stock and castings for aerospace use
- Requirements for manufacture, covering responsibilities of the producer for material condition and traceability
- Inspection and testing principles, defining that products must be inspected and tested to demonstrate conformance to agreed requirements
- Documentation and marking, including records, certificates and identification required for aerospace traceability
- Acceptance criteria and quality levels, noting the default to quality level 2 when EN 2103 alone is cited
- Reference to specific requirements in Parts 2 and 3 for remelting stock and for castings respectively
(EN 2103-1 sets general requirements only; specific test methods and parameter values are found in the companion parts.)
Applications
EN 2103-1:1991 is intended for use across the aerospace supply chain where remelted and cast metal feedstock is specified:
- Aerospace manufacturers and OEMs specifying raw material quality for components
- Foundries and remelters producing steel, nickel‑base or cobalt‑base alloy ingots, bars and castings
- Quality assurance and inspection teams establishing acceptance procedures and supplier audits
- Procurement and contracting for aerospace materials where standardized requirements and traceability are needed
Using EN 2103-1 helps ensure material consistency, traceability, and a common baseline of quality for aerospace remelting stock and castings.
Related standards
- EN 2103-2 - Particular requirements for remelting stock
- EN 2103-3 - Particular requirements for castings (includes tables referenced for quality levels)
Keywords: EN 2103-1:1991, aerospace series, remelting stock, castings, steel, nickel base, cobalt base, technical specifications, general requirements, inspection, testing, quality level.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specifications - Part 1: General requirementsLuft- und Raumfahrt - Vormaterial und Gußstücke aus Stahl, Nickel- und Kobaltlegierungen - Teil 1: Allgemeine AnforderungenSérie aérospatiale - Produits pour refusion et pieces moulées en acier et alliages base nickel et base cobalt - Spécification technique - Partie 1: Exigences généralesAerospace series - Steel, nickel
...
Frequently Asked Questions
EN 2103-1:1991 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aerospace series - Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specifications - Part 1: General requirements". This standard covers: This standard specifies the general requirements for the manufacture, inspection and testing of steel, nickel base or cobalt base alloy remelting stock and castings. Particular requirements applicable to remelting stock and castings are defined in EN 2103-2 and EN 2103-3 respectively. Unless otherwise specified on the drawing, order or inspection schedule, the reference to EN 2103 only defines one quality level which is quality level 2 in table 4 or5 of EN 2103-3.
This standard specifies the general requirements for the manufacture, inspection and testing of steel, nickel base or cobalt base alloy remelting stock and castings. Particular requirements applicable to remelting stock and castings are defined in EN 2103-2 and EN 2103-3 respectively. Unless otherwise specified on the drawing, order or inspection schedule, the reference to EN 2103 only defines one quality level which is quality level 2 in table 4 or5 of EN 2103-3.
EN 2103-1:1991 is classified under the following ICS (International Classification for Standards) categories: 49.025.10 - Steels; 49.025.99 - Other materials. The ICS classification helps identify the subject area and facilitates finding related standards.
You can purchase EN 2103-1:1991 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...