EN ISO 13705:2006

Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service (ISO 13705:2006)

ISO 13705:2006 specifies requirements and gives recommendations for the design, materials, fabrication, inspection, testing, preparation for shipment, and erection of fired heaters, air preheaters, fans and burners for general refinery service.

Erdöl-, petrochemische und Erdgasindustrie - Befeuerte Erhitzer für den allgemeinen Einsatz in Raffinerien (ISO 13705:2006)

Industries du pétrole, de la pétrochimie et du gaz naturel - Réchauffeurs à brûleurs pour usage général dans les raffineries (ISO 13705:2006)

L'ISO 13705:2006 spécifie des exigences et donne des recommandations pour la conception, les matériaux, la fabrication, l'inspection, les essais, la préparation pour l'expédition et le montage de réchauffeurs à brûleurs, de préchauffeurs d'air, de ventilateurs et de brûleurs pour usage général dans les raffineries.

Petrokemična industrija ter industrija za predelavo nafte in zemeljskega plina – Grelniki za splošno uporabo v rafinerijah (ISO 13705:2006)

General Information

• Status: Withdrawn
• Publication Date: 14-Nov-2006
• Withdrawal Date: 18-Dec-2012
• ICS: 75.180.20 - Processing equipment
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 19-Dec-2012
• Completion Date: 19-Dec-2012
• Ref Project: SIST EN ISO 13705:2007 - Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service (ISO 13705:2006)

Relations

• Replaces: EN ISO 13705:2001/AC:2003 - Petroleum and natural gas industries - Fired heaters for general refinery service (ISO 13705:2001)
• Effective Date: 22-Dec-2008
• Replaces: EN ISO 13705:2001 - Petroleum and natural gas industries - Fired heaters for general refinery service (ISO 13705:2001)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 13705:2012 - Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service (ISO 13705:2012)
• Effective Date: 26-Dec-2012

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2007
1DGRPHãþD
SIST EN ISO 13705:2004
SIST EN ISO 13705:2004/AC:2004
3HWURNHPLþQDLQGXVWULMDWHULQGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD±
*UHOQLNL]DVSORãQRXSRUDERYUDILQHULMDK,62
Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery
service (ISO 13705:2006)
Erdöl-, petrochemische und Erdgasindustrie - Befeuerte Erhitzer für den allgemeinen
Einsatz in Raffinerien (ISO 13705:2006)
Industries du pétrole, de la pétrochimie et du gaz naturel - Réchauffeurs a bruleurs pour
usage général dans les raffineries (ISO 13705:2006)
Ta slovenski standard je istoveten z: EN ISO 13705:2006
ICS:
75.180.20 Predelovalna oprema Processing equipment
97.100.01 Grelniki na splošno Heating appliances in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 13705
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2006
ICS 75.180.20 Supersedes EN ISO 13705:2001
English Version
Petroleum, petrochemical and natural gas industries - Fired
heaters for general refinery service (ISO 13705:2006)
Industries du pétrole, de la pétrochimie et du gaz naturel - Erdöl-, petrochemische und Erdgasindustrie - Befeuerte
Réchauffeurs à brûleurs pour usage général dans les Erhitzer für den allgemeinen Einsatz in Raffinerien (ISO
raffineries (ISO 13705:2006) 13705:2006)
This European Standard was approved by CEN on 6 November 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13705:2006: E
worldwide for CEN national Members.

Foreword
This document (EN ISO 13705:2006) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 "Materials, equipment and offshore
structures for petroleum, petrochemical and natural gas industries", the secretariat of which is
held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by May 2007, and conflicting national standards
shall be withdrawn at the latest by May 2007.

This document supersedes EN ISO 13705:2001.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO 13705:2006 has been approved by CEN as EN ISO 13705:2006 without any
modifications.
INTERNATIONAL ISO
STANDARD 13705
Second edition
2006-11-15
Petroleum, petrochemical and natural gas
industries — Fired heaters for general
refinery service
Industries du pétrole, de la pétrochimie et du gaz naturel —
Réchauffeurs à brûleurs pour usage général dans les raffineries

Reference number
ISO 13705:2006(E)
©
ISO 2006
ISO 13705:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved

ISO 13705:2006(E)
Contents Page
Foreword. v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 4
4 General. 11
4.1 Pressure design code. 11
4.2 Regulations . 11
4.3 Heater nomenclature . 11
5 Proposals. 15
5.1 Purchaser’s responsibilities. 15
5.2 Vendor’s responsibilities . 15
5.3 Documentation. 15
5.4 Final records . 17
6 Design considerations . 17
6.1 Process design . 17
6.2 Combustion design . 18
6.3 Mechanical design. 18
7 Tubes. 19
7.1 General. 19
7.2 Extended surface. 20
7.3 Materials . 21
8 Headers. 21
8.1 General. 21
8.2 Plug headers . 22
8.3 Return bends. 23
8.4 Materials . 23
9 Piping, terminals and manifolds . 24
9.1 General. 24
9.2 Allowable movement and loads . 25
9.3 Materials . 27
10 Tube supports. 27
10.1 General. 27
10.2 Loads and allowable stress . 28
10.3 Materials . 29
11 Refractories and insulation . 30
11.1 General. 30
11.2 Brick and tile construction . 31
11.3 Castable construction . 32
11.4 Ceramic-fibre construction. 32
11.5 Multi-component lining construction . 34
11.6 Materials . 34
12 Structures and appurtenances. 35
12.1 General. 35
12.2 Structures . 35
12.3 Header boxes, doors and ports. 36
ISO 13705:2006(E)
12.4 Ladders, platforms and stairways. 36
12.5 Materials. 37
13 Stacks, ducts and breeching . 38
13.1 General . 38
13.2 Design considerations. 38
13.3 Design methods . 39
13.4 Static design. 40
13.5 Wind-induced vibration design. 41
13.6 Materials.
...