EN 13480-4:2012

Metallic industrial piping - Part 4: Fabrication and installation

This Part of this European standard EN 13480 describes the requirements for fabrication and installation of piping systems, including supports, designed in accordance with EN 13480-3.

Metallische industrielle Rohrleitungen - Teil 4: Fertigung und Verlegung

Dieser Teil der Europäischen Norm EN 13480 beschreibt die Anforderungen an die Fertigung und Verlegung einschließlich der Halterungen von Rohrleitungssystemen, die nach EN 13480-3 konstruiert sind.

Tuyauteries industrielles métalliques - Partie 4: Fabrication et installation

La présente partie de EN 13480 spécifie les exigences relatives à la fabrication et à l'installation des réseaux de tuyauteries, supports inclus, conçus conformément à prEN 13480-3.

Kovinski industrijski cevovodi - 4. del: Proizvodnja in vgradnja

Ta del tega evropskega standarda določa zahteve za proizvodnjo in vgradnjo cevnih sistemov, vključno z nosilci, ki so konstruirani v skladu s standardom EN 13480-3:2012.

General Information

• Status: Withdrawn
• Publication Date: 26-Jun-2012
• Withdrawal Date: 27-Jun-2017
• ICS: 23.040.01 - Pipeline components and pipelines in general
• Technical Committee: CEN/TC 267 - Industrial piping and pipelines
• Drafting Committee: CEN/TC 267/WG 8 - Maintenance of EN 13480 series
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 28-Jun-2017
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13480-4:2012 - Metallic industrial piping - Part 4: Fabrication and installation

Relations

• Replaces: EN 13480-4:2002 - Metallic industrial piping - Part 4: Fabrication and installation
• Effective Date: 08-Jun-2022
• Replaced By: EN 13480-4:2017 - Metallic industrial piping - Part 4: Fabrication and installation
• Effective Date: 08-Jun-2022
• Amended By: EN 13480-4:2012/A3:2016 - Metallic industrial piping - Part 4: Fabrication and installation
• Effective Date: 08-Jun-2022
• Amended By: EN 13480-4:2012/A5:2017 - Metallic industrial piping - Part 4: Fabrication and installation
• Effective Date: 08-Jun-2022
• Amended By: EN 13480-4:2012/A2:2015 - Metallic industrial piping - Part 4: Fabrication and installation
• Effective Date: 08-Jun-2022
• Amended By: EN 13480-4:2012/A1:2013 - Metallic industrial piping - Part 4: Fabrication and installation
• Effective Date: 08-Jun-2022
• Amended By: EN 13480-4:2012/A4:2017 - Metallic industrial piping - Part 4: Fabrication and installation
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kovinski industrijski cevovodi - 4. del: Proizvodnja in vgradnjaMetallische industrielle Rohrleitungen - Teil 4: Fertigung und VerlegungTuyauteries industrielles métalliques - Partie 4: Fabrication et installationMetallic industrial piping - Part 4: Fabrication and installation77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 13480-4:2012SIST EN 13480-4:2012en,fr,de01-oktober-2012SIST EN 13480-4:2012SLOVENSKI
STANDARDSIST EN 13480-4:20021DGRPHãþD



SIST EN 13480-4:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13480-4
June 2012 ICS 23.040.01 Supersedes EN 13480-4:2002English Version
Metallic industrial piping - Part 4: Fabrication and installation
Tuyauteries industrielles métalliques - Partie 4: Fabrication et installation
Metallische industrielle Rohrleitungen - Teil 4: Fertigung und Verlegung This European Standard was approved by CEN on 8 May 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13480-4:2012: ESIST EN 13480-4:2012



EN 13480-4:2012 (E) Issue 1 (2012-06) 2 Contents Page Foreword .4 1 Scope .6 2 Normative references .6 3 Terms and definitions .7 4 Symbols .7 5 General .7 5.1 Requirements on the manufacturer .7 5.2 Requirements on fabricators and installers of piping and supports .8 5.3 Requirements for fabrication and installation .8 5.4 Classification of piping .8 5.5 Material grouping .9 5.6 Tolerances .9 6 Cutting and bevelling .9 6.1 General .9 6.2 Transfer of marking for pressure parts .9 7 Bending and other forming .9 7.1 General .
...