EN 287-1:2011

Qualification test of welders - Fusion welding - Part 1: Steels

This European Standard defines the qualification testing of welders for the fusion welding of steels.
It provides a set of technical rules for a systematic qualification test of the welder, and enables such qualifications to be uniformly accepted independently of the type of product, location and examiner/examining body.
When qualifying welders, the emphasis is placed on the welder's ability to manually manipulate the electrode / welding torch / welding blowpipe and thereby producing a weld of acceptable quality.
The welding processes referred to in this standard include those fusion-welding processes which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automated welding processes (see EN 1418).

Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle

Diese Europäische Norm definiert die Schweißerprüfung für das Schmelzschweißen von Stählen. Sie stellt eine Reihe technischer Regeln für systematische Prüfungen von Schweißern auf und ermöglicht so, dass solche Qualifizierungen unabhängig von der Art des Erzeugnisses, des Ortes und des Prüfers/der Prüfstelle einheitlich akzeptiert werden. Wenn Schweißer qualifiziert werden, liegt der Schwerpunkt auf der Fähigkeit des Schweißers, den Elektrodenhalter/die Schweißpistole/den Schweißbrenner so zu handhaben, dass damit eine Schweißung von zulässiger Qualität erzeugt wird. Die Schweißprozesse nach dieser Norm schließen nur solche Schmelzschweißprozesse ein, die als Handschweißen oder teilmechanisches Schweißen bezeichnet werden. Sie schließen nicht die vollmechanischen und automatischen Schweißprozesse ein (siehe EN 1418).

Epreuve de qualification des soudeurs - Soudage par fusion - Partie 1 : Aciers

La présente Norme européenne définit l’épreuve de qualification des soudeurs pour le soudage par fusion des
aciers.
Elle fournit un ensemble de règles techniques pour l’épreuve de qualification systématique des soudeurs, et
permet à de telles qualifications d’être acceptées uniformément, indépendamment du type de produit, du lieu
et de l’examinateur ou de l’organisme d’examen.
Lors de la qualification des soudeurs, l’accent est porté sur l’aptitude du soudeur à guider manuellement
l’électrode, la torche ou le chalumeau de soudage pour produire une soudure de qualité acceptable.
Les procédés de soudage concernés par la présente norme sont les procédés de soudage par fusion
désignés en tant que, manuels ou semi-automatiques. Elle ne traite pas des procédés de soudage totalement
mécanisés et automatisés (voir l’EN 1418).

Preskušanje varilcev - Talilno varjenje - 1. del: Jekla

Ta evropski standard določa preskus kvalifikacij varilcev za talilno varjenje jekel.
Podaja nabor tehničnih pravil za sistematično preskušanje kvalifikacij varilca in omogoča, da so tovrstne kvalifikacije enotno sprejete, neodvisno od tipa izdelka, lokacije in preglednika/organa za preverjanje.
Pri kvalifikaciji varilcev je poudarek na varilčevi sposobnosti ročnega upravljanja elektrode/varilnega gorilnika/varilnega pihalnika, da proizvede zvar sprejemljive kakovosti.
Postopki varjenja, navedeni v tem standardu, vključujejo talilne postopke varjenja, ki so opredeljeni kot ročno ali delno mehanizirano varjenje. Ne zajema popolnoma mehaniziranih in avtomatiziranih postopkov varjenja (glej EN 1418).

General Information

• Status: Withdrawn
• Publication Date: 12-Jul-2011
• Withdrawal Date: 15-Oct-2013
• ICS: 25.160.01 - Welding, brazing and soldering in general
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 4 - Quality management in the field of welding
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 16-Oct-2013
• Completion Date: 16-Oct-2013
• Directive: 2009/105/EC - DIRECTIVE 2009/105/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 September 2009 relating to simple pressure vessels
• Directive: 87/404/EEC - Simple pressure vessels
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 287-1:2011 - Qualification test of welders - Fusion welding - Part 1: Steels

Relations

• Replaces: EN 287-1:2004 - Qualification test of welders - Fusion welding - Part 1: Steels
• Effective Date: 16-Jul-2011
• Replaces: EN 287-1:2004/AC:2004 - Qualification test of welders - Fusion welding - Part 1: Steels
• Effective Date: 16-Jul-2011
• Replaces: EN 287-1:2004/A2:2006 - Qualification test of welders - Fusion welding - Part 1: Steels
• Effective Date: 16-Jul-2011
• Replaced By: EN ISO 9606-1:2013 - Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012)
• Effective Date: 17-Oct-2012

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Preskušanje varilcev - Talilno varjenje - 1. del: JeklaPrüfung von Schweißern - Schmelzschweißen - Teil 1: StähleEpreuve de qualification des soudeurs - Soudage par fusion - Partie 1 : AciersQualification test of welders - Fusion welding - Part 1: Steels25.160.01Varjenje, trdo in mehko spajkanje na splošnoWelding, brazing and soldering in generalICS:Ta slovenski standard je istoveten z:EN 287-1:2011SIST EN 287-1:2011en,fr,de01-november-2011SIST EN 287-1:2011SLOVENSKI
STANDARDSIST EN 287-1:2004/AC:2004SIST EN 287-1:2004/A2:2006SIST EN 287-1:20041DGRPHãþD



SIST EN 287-1:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 287-1
July 2011 ICS 25.160.01 Supersedes EN 287-1:2004English Version
Qualification test of welders - Fusion welding - Part 1: Steels
Epreuve de qualification des soudeurs - Soudage par fusion - Partie 1 : Aciers
Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle This European Standard was approved by CEN on 16 June 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 287-1:2011: ESIST EN 287-1:2011



EN 287-1:2011 (E) 2 Contents Page Foreword .4Introduction .51 Scope .62 Normative references .63 Terms and definitions .64 Reference numbers, symbols and abbreviated terms .84.1 General .84.2 Reference numbers of welding processes .84.3 Symbols and abbreviations .94.3.1 For test pieces .94.3.2 For consumables .94.3.3 For other weld details . 104.3.4 For bend tests . 105 Essential variables and range of qualification . 115.1 General . 115.2 Welding processes . 115.3 Product type .
...