Ceramic tiles - Part 9: Determination of resistance to thermal shock (ISO 10545-9:2013)

ISO 15045-9:2013 specifies a test method for determining the resistance to thermal shock of all ceramic tiles under normal conditions of use.

Keramische Fliesen und Platten - Teil 9: Bestimmung der Temperaturwechselbeständigkeit (ISO 10545-9:2013)

Dieser Teil von ISO 10545 legt ein Prüfverfahren fest, mit dem die Temperaturwechselbeständigkeit von keramischen Fliesen und Platten unter üblichen Gebrauchsbedingungen bestimmt wird.
Wenn nicht anders vereinbart, werden in Abhängigkeit von der Wasseraufnahme der Fliesen und Platten unterschiedliche Verfahren angewendet (Prüfungen mit oder ohne Eintauchen).
ANMERKUNG ISO 13006 enthält Anforderungen an die Eigenschaften von Fliesen und Platten und andere nützliche Informationen über diese Erzeugnisse.

Carreaux et dalles céramiques - Partie 9: Détermination de la résistance aux chocs thermiques (ISO 10545-9:2013)

L'ISO 10545-9:2013 spécifie une méthode permettant de déterminer la résistance aux chocs thermiques de tous les carreaux céramiques dans les conditions normales d'utilisation.

Keramične ploščice - 9. del: Ugotavljanje odpornosti proti hitrim temperaturnim spremembam (ISO 10545-9:2013)

Ta del standarda ISO 10545 določa preskusno metodo za ugotavljanje odpornosti proti hitrim temperaturnim spremembam vseh keramičnih ploščic pri normalnih pogojih uporabe. Odvisno od absorpcije vode ploščic se uporabijo različni postopki (preskusi s potapljanjem ali brez), če ni sklenjeno drugače.

General Information

Status
Published
Publication Date
09-Jul-2013
Technical Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
10-Jul-2013
Completion Date
10-Jul-2013

RELATIONS

Buy Standard

Standard
EN ISO 10545-9:2013
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 10545-9:2013
01-september-2013
1DGRPHãþD
SIST EN ISO 10545-9:1998
.HUDPLþQHSORãþLFHGHO8JRWDYOMDQMHRGSRUQRVWLSURWLKLWULPWHPSHUDWXUQLP
VSUHPHPEDP ,62

Ceramic tiles - Part 9: Determination of resistance to thermal shock (ISO 10545-9:2013)

Keramische Fliesen und Platten - Teil 9: Bestimmung der
Temperaturwechselbeständigkeit (ISO 10545-9:2013)

Carreaux et dalles céramiques - Partie 9: Détermination de la résistance aux chocs

thermiques (ISO 10545-9:2013)
Ta slovenski standard je istoveten z: EN ISO 10545-9:2013
ICS:
91.100.23 .HUDPLþQHSORãþLFH Ceramic tiles
SIST EN ISO 10545-9:2013 en,fr

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10545-9:2013
---------------------- Page: 2 ----------------------
SIST EN ISO 10545-9:2013
EUROPEAN STANDARD
EN ISO 10545-9
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2013
ICS 91.100.23 Supersedes EN ISO 10545-9:1996
English Version
Ceramic tiles - Part 9: Determination of resistance to thermal
shock (ISO 10545-9:2013)

Carreaux et dalles céramiques - Partie 9: Détermination de Keramische Fliesen und Platten - Teil 9: Bestimmung der

la résistance aux chocs thermiques (ISO 10545-9:2013) Temperaturwechselbeständigkeit (ISO 10545-9:2013)

This European Standard was approved by CEN on 9 July 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same

status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United

Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10545-9:2013: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10545-9:2013
EN ISO 10545-9:2013 (E)
Contents Page

Foreword ..............................................................................................................................................................3

---------------------- Page: 4 ----------------------
SIST EN ISO 10545-9:2013
EN ISO 10545-9:2013 (E)
Foreword

This document (EN ISO 10545-9:2013) has been prepared by Technical Committee ISO/TC 189 “Ceramic

tile” in collaboration with Technical Committee CEN/TC 67 “Ceramic tiles” the secretariat of which is held by

UNI.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by January 2014, and conflicting national standards shall be withdrawn at

the latest by January 2014.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 10545-9:1996.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech

Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,

Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

Endorsement notice

The text of ISO 10545-9:2013 has been approved by CEN as EN ISO 10545-9:2013 without any modification.

---------------------- Page: 5 ----------------------
SIST EN ISO 10545-9:2013
---------------------- Page: 6 ----------------------
SIST EN ISO 10545-9:2013
INTERNATIONAL ISO
STANDARD 10545-9
Third edition
2013-07-01
Ceramic tiles —
Part 9:
Determination of resistance to
thermal shock
Carreaux et dalles céramiques —
Partie 9: Détermination de la résistance aux chocs thermiques
Reference number
ISO 10545-9:2013(E)
ISO 2013
---------------------- Page: 7 ----------------------
SIST EN ISO 10545-9:2013
ISO 10545-9:2013(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2013

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form

or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior

written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of

the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 10545-9:2013
ISO 10545-9:2013(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative References ..................................................................................................................................................................................... 1

3 Principle ........................................................................................................................................................................................................................ 1

4 Apparatus ..................................................................................................................................................................................................................... 1

5 Test specimens........................................................................................................................................................................................................ 2

6 Procedure..................................................................................................................................................................................................................... 2

6.1 Preliminary check of the test specimens .......................................................................................................................... 2

6.2 Test with immersion .......................................................................................................................................................................... 2

6.3 Test without immersion .................................................................................................................................................................. 2

6.4 Temperature cycling ........................................................................................................................................................................... 2

6.5 Examination....................................................................................................................................................

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.