EN 3302:2017
(Main)Aerospace series - Bolts in heat resisting steel FE-PM1708 (FV535) - Classification: 1 000 MPa/550 °C - Technical specification
Aerospace series - Bolts in heat resisting steel FE-PM1708 (FV535) - Classification: 1 000 MPa/550 °C - Technical specification
This European Standard specifies the technical, qualification and quality assurance requirements for bolts in material FE PM1708 (FV535) of tensile strength class 1 000 MPa at room temperature, maximum test temperature of material 550 °C.
Primarily for aerospace applications it is applicable to such bolts when referenced on the product standard or drawing.
Luft- und Raumfahrt - Schrauben aus hochwarmfestem Stahl FE-PM1708 (FV535) - Klasse: 1 000 MPa/550 °C - Technische Lieferbedingungen
Série aérospatiale - Vis en acier résistant à chaud FE-PM1708 (FV535) - Classification : 1 000 MPa/550 °C - Spécification technique
La présente norme spécifie les exigences techniques, de qualification et d’assurance de la qualité des vis en acier résistant à chaud FE-PM1708 (FV535), classification de traction 1 000 Mpa, à température ambiante, température maximale d’essai du matériau 550 °C.
Cette norme, essentiellement prévue pour les applications aéronautiques, s’applique aux vis lorsqu’elle est citée dans la norme de produit ou sur le dessin.
Aeronavtika - Sorniki iz toplotnoodpornega jekla FE-PM1708 (FV535) - Klasifikacija: 1000 MPa/550 °C - Tehnična specifikacija
Ta evropski standard določa tehnične, kvalifikacijske in kakovostne zahteve za sornike iz toplotnoodpornega jekla FE-PM1708 (FV535) natezne trdnosti 1000 MPa pri sobni temperaturi, pri čemer je najvišja preskusna temperatura materiala 550 °C.
Uporablja se predvsem v vesoljskih plovilih za sornike, ki se sklicujejo na standard izdelka ali risbe.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 3302:2017
01-oktober-2017
1DGRPHãþD
SIST EN 3302:2008
$HURQDYWLND6RUQLNLL]WRSORWQRRGSRUQHJDMHNOD)(30 )9
.ODVLILNDFLMD 03Dƒ&7HKQLþQDVSHFLILNDFLMD
Aerospace series - Bolts in heat resisting steel FE-PM1708 (FV535) - Classification: 1
000 MPa/550 °C - Technical specification
Luft- und Raumfahrt - Schrauben aus hochwarmfestem Stahl FE-PM1708 (FV535) -
Klasse: 1 000 MPa/550 °C - Technische Lieferbedingungen
Série aérospatiale - Vis en acier résistant à chaud FE-PM1708 (FV535) - Classification :
1 000 MPa/550 °C - Spécification technique
Ta slovenski standard je istoveten z: EN 3302:2017
ICS:
49.025.10 Jekla Steels
49.030.20 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN 3302:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 3302:2017
---------------------- Page: 2 ----------------------
SIST EN 3302:2017
EN 3302
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2017
EUROPÄISCHE NORM
ICS 49.030.20 Supersedes EN 3302:2007
English Version
Aerospace series - Bolts in heat resisting steel FE-PM1708
(FV535) - Classification: 1 000 MPa/550 °C - Technical
specification
Série aérospatiale - Vis en acier résistant à chaud FE- Luft- und Raumfahrt - Schrauben aus hochwarmfestem
PM1708 (FV535) - Classification : 1 000 MPa/550 °C - Stahl FE-PM1708 (FV535) - Klasse: 1 000 MPa/550 °C -
Spécification technique Technische Lieferbedingungen
This European Standard was approved by CEN on 10 April 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3302:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3302:2017
EN 3302:2017 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Certification and quality assurance . 7
5 Technical requirements and test methods . 8
(informative) Standard evolution form . 25
2
---------------------- Page: 4 ----------------------
SIST EN 3302:2017
EN 3302:2017 (E)
European foreword
This document (EN 3302:2017) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2018
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.