EN 3302:2007

Aerospace series - Bolts in heat resisting steel FE-PM1708 (FV535) - Classification: 1 000 MPa/550 °C - Technical specification

This standard specifies the technical, qualification and quality assurance requirements for bolts in material FE PM1708 (FV535) of tensile strength class 1 000 MPa at room temperature, maximum test temperature of material 550 °C.
Primarily for aerospace applications it is applicable to such bolts when referenced on the product standard or drawing.

Luft- und Raumfahrt - Schrauben aus hochwarmfestem Stahl FE-PM1708 (FV535) - Klasse: 1 000 MPa/550 °C - Technische Lieferbedingungen

Diese Norm legt die technischen Anforderungen, die Anforderungen an die Qualifikation sowie die Anforde¬rungen an die Qualitätssicherung für Schrauben aus dem Werkstoff FE PM1708 (FV535), Zugfestigkeits¬klasse 1 000 MPa bei Raumtemperatur, maximale Prüftemperatur des Werkstoffes 550 °C, fest.
Diese Norm gilt in erster Linie für Anwendungen in der Luft  und Raumfahrt und ist auf die Schrauben anzu¬wenden, auf die in der Produktnorm oder Zeichnung verwiesen wird.

Série aérospatiale - Vis en acier résistant à chaud FE-PM1708 (FV535) - Classification: 1 000 MPa/550 °C - Spécification technique

Aeronavtika - Sorniki iz toplotnoodpornega jekla FE-PM1708 (FV535) - Klasifikacija: 1 000 MPa/550 °C - Tehnična specifikacija

General Information

• Status: Withdrawn
• Publication Date: 11-Dec-2007
• Withdrawal Date: 25-Jul-2017
• ICS: 49.030.20 - Bolts, screws, studs
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 26-Jul-2017
• Ref Project: SIST EN 3302:2008 - Aerospace series - Bolts in heat resisting steel FE-PM1708 (FV535) - Classification: 1 000 MPa/550 °C - Technical specification

Relations

• Replaced By: EN 3302:2017 - Aerospace series - Bolts in heat resisting steel FE-PM1708 (FV535) - Classification: 1 000 MPa/550 °C - Technical specification
• Effective Date: 02-Aug-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Bolts in heat resisting steel FE-PM1708 (FV535) - Classification: 1 000 MPa/550 °C - Technical specificationSérie aérospatiale - Vis en acier résistant à chaud FE-PM1708 (FV535) - Classification: 1 000 MPa/550 °C - Spécification techniqueLuft- und Raumfahrt - Schrauben aus hochwarmfestem Stahl FE-PM1708 (FV535) - Klasse: 1 000 MPa/550 °C - Technische LieferbedingungenTa slovenski standard je istoveten z:EN 3302:2007SIST EN 3302:2008en49.030.20ICS:SLOVENSKI
STANDARDSIST EN 3302:200801-marec-2008

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3302
December 2007 ICS 49.030.20 English Version
Aerospace series - Bolts in heat resisting steel FE-PM1708 (FV535) - Classification: 1 000 MPa/550 °C - Technical specification
Série aérospatiale - Vis en acier résistant à chaud FE-PM1708 (FV535) - Classification: 1 000 MPa/550 °C - Spécification technique
Luft- und Raumfahrt - Schrauben aus hochwarmfestem Stahl FE-PM1708 (FV535) - Klasse: 1 000 MPa/550 °C - Technische Lieferbedingungen This European Standard was approved by CEN on 5 November 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3302:2007: E

1) Inactive for new designation, see EN 4244 and EN 4245. 2) Published as ASD Standard at the date of publication of this standard. 3) Published as ASD Prestandard at the date of publication of this standard. 4) Published as ASD Technical Report at the date of publication of this standard.

Material Material FE-PM1708 to specification EN 2493 supplied by an approved source: shall be used for the manufacture of bolts to this standard. As stated in the material specification.
Q 25 5.2
Dimensions, tolerances of form and position, threads and quality
A Tables 6 and 7 5.2.1
Dimensions The dimensions of the finished bolts shall conform to the product standard or definition document. All dimensions shall be controlled by an approved system of gauging.
5.2.2
Tolerances of form and position Tolerances of form and position shall conform to the product standard or definition document. Tolerances of form and position shall be controlled by an approved system of gauging.
5.2.3
Threads Threads shall conform to the product standard or definition document. Threads shall be gauged by an approved system of gauging.
5.3
Manufacturing
5.3.1
Forging The heads of the bolts shall be formed by hot or cold forging. If hot forged the forging temperature shall not exceed 1 170 °C. The method of forging shall be approved.
The heating equipment for f
...