EN 14037-4:2016
(Main)Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 4: Pre-fabricated ceiling mounted radiant panels - Test method for cooling capacity
Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 4: Pre-fabricated ceiling mounted radiant panels - Test method for cooling capacity
This European Standard defines the technical specifications and requirements for the definition of the cooling capacity of pre-fabricated ceiling mounted radiant panels according to the specifications of EN 14037 1:2016, 3.3.1. The test according to this standard requires the measurement of the thermal output according to EN 14037 2:2016 of the model.
An der Decke frei abgehängte Heiz- und Kühlflächen für Wasser mit einer Temperatur unter 120 °C - Teil 4: Vorgefertigte Deckenstrahlplatten zur Raumheizung - Prüfverfahren für die Kühlleistung
Panneaux rayonnants de chauffage et de rafraîchissement alimentés avec une eau à une température inférieure à 120 °C - Partie 4: Méthode d'essai pour la détermination de la puissance de rafraîchissement des panneaux rayonnants préfabriqués
La présente Norme européenne définit les spécifications et exigences techniques pour la définition de la puissance de rafraîchissement des panneaux rayonnants de plafond préfabriqués conformes aux spécifications de l'EN 14037-1:2016, paragraphe 3.3.1. L'essai conforme à la présente Norme nécessite le mesurage de la puissance thermique du modèle selon l'EN 14037-2:2016.
Prosto viseče grelne in hladilne površine za vodo s temperaturo do 120 °C - 4. del: Predizdelane stropne sevalne plošče - Metoda preskušanja hladilne moči
Ta evropski standard opredeljuje tehnične specifikacije in zahteve za definicijo hladilne moči stropnih sevalnih plošč v skladu s specifikacijami prEN 14037-1:2011, 3.3.1. Preskus po tem standardu zahteva merjenje toplotne moči v skladu s standardom EN 14037-2 modela.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.An der Decke frei abgehängte Heiz- und Kühlflächen für Wasser mit einer Temperatur unter 120 °C - Teil 4: Vorgefertigte Deckenstrahlplatten zur Raumheizung - Prüfverfahren für die KühlleistungPanneaux rayonnants de chauffage et de rafraîchissement alimentés avec une eau à une température inférieure à 120 °C - Partie 4: Méthode d'essai pour la détermination de la puissance de rafraîchissement des panneaux rayonnants préfabriquésFree hanging heating and cooling surfaces for water with a temperature below 120°C - Part 4: Pre-fabricated ceiling mounted radiant panels - Test method for cooling capacity91.140.10Sistemi centralnega ogrevanjaCentral heating systemsICS:Ta slovenski standard je istoveten z:EN 14037-4:2016SIST EN 14037-4:2017en01-april-2017SIST EN 14037-4:2017SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14037-4
September
t r s x ICS
{ sä s v rä s râ
{ sä s v rä u r English Version
Free hanging heating and cooling surfaces for water with a temperature below
s t r ¹C æ Part
vã Preæfabricated ceiling mounted radiant panels æ Test method for cooling capacityPanneaux rayonnants de chauffage et de rafraîchissement alimentés avec une eau à une température inférieure à
s t r
¹C æ Partie
vã Méthode d 5essai pour la détermination de la puissance de rafraîchissement des panneaux rayonnants préfabriqués
An der Decke frei abgehängte Heizæ und Kühlflächen für Wasser mit einer Temperatur unter
s t r
¹C æ Teil
vã Vorgefertigte Deckenstrahlplatten zur Raumheizung æ Prüfverfahren für die Kühlleistung This European Standard was approved by CEN on
s z March
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s v r u yæ vã t r s x ESIST EN 14037-4:2017
2 Contents Page European foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Symbols and units . 6 5 Testing of cooling capacity. 7 5.1 Short description . 7 5.2 Test booth . 7 5.3 Test methods . 9 6 Carrying out the measurement . 10 6.1 General . 10 6.2 Dimension and construction of the test samples. 10 6.3 Selection of the models to be tested for determining the cooling capacity of a type . 10 6.4 Manufacturer documents for the test samples. 10 6.5 Arrangement of the sample in the test booth . 10 6.6 Upper insulation of the test sample. 10 6.7 Connection of the test sample to the measuring circuit . 10 6.8 Tests . 10 6.9 Mass flow . 10 6.10 Test temperature . 11 6.11 Steady-state conditions . 11 6.12 Correction due to the air pressure . 11 6.13 Result of measurement – characteristic equation . 11 6.14 Nominal cooling capacity . 12 7 Test report . 12 7.1 General . 12 7.2 Data . 12 Annex A (informative)
Specimen of the test report for cooling capacity . 13 Bibliography . 16
3 European foreword This document (EN 14037-4:2016) has been prepared by Technical Committee CEN/TC 130 “Space heating appliances without integral heat sources”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2017, and conflicting national standards shall be withdrawn at the latest by March 2017. The European Standard EN 14037, Free hanging heating and cooling surfaces for water with a temperature below 120°C, consists of the following parts: — Part 1: Prefabricated ceiling mounted radiant panels for space heating - Technical specifications and re-quirements; — Part 2: Prefabricated ceiling mounted radiant panels for space heating - Test method for thermal output; — Part 3: Prefabricated ceiling mounted radiant panels for space heating - Rating method and evaluation of radiant thermal output; — Part 4: Prefabricated ceiling mounted radiant panels for space heating - Test method for cooling capacity; — Part 5: Open or closed heated ceiling surfaces - Test method for thermal output. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portu-gal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 14037-4:2017
4 Introduction This European Standard results from the recognition, that heated and chilled ceiling radiant panels falling into the field of application hereinafter stated are traded on the basis of their thermal output. For evaluating and comparing different heated and chilled ceiling surfaces it is therefore necessary to refer to a heating stipulated value. As installations with ceiling mounted radiant panels can also be used in practice for space cooling, it is nec-essary to have a test method for evaluating the cooling capacity. Installations with different free hanging heating and cooling surfaces need, for the use of space heating a test method for evaluating the heating out-put. The test method differs from the method for ceiling mounted radiant panels. SIST EN 14037-4:2017
5 1 Scope This European Standard defines the technical specifications and requirements for the definition of the cool-ing capacity of pre-fabricated ceiling mounted radiant panels according to the specifications of EN 14037-1:2016, 3.3.1. The test according to this standard requires the measurement of the thermal output according to EN 14037-2:2016 of the model. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indis-pensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 14037-1:2016, Pre-fabricated ceiling mounted radiant panels for space heating - Technical specifications and requirements EN 14037-2:2016, Pre-fabricated ceiling mounted radiant panels for space heating - Test method for thermal output EN ISO/IEC 17025:2005, General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 14037-1:2016 and the following apply. 3.1 water temperature rise temperature difference between the outlet and inlet water temperature of the cooling appliance 3.2 standard temperature difference for the cooling capacity of ceiling mounted radiant panels reference room temperature 32°C and mean water temperature 17 °C, determined temperature difference 15 K 3.3 nominal temperature difference determined temperature difference 8 K between room temperature and mean water temperature 3.4 indirect cooling surface (dry surface) portion of the cooling surface of the panel which is in contact with air only (e.g. radiant sheet between the tubes) 3.5 direct cooling surface (wet surface) portion of the cooling surface of the panel which is in contact with the water 3.6 standard cooling capacity cooling capacity at standard temperature difference and standard air pressure SIST EN 14037-4:2017
6 3.7 nominal cooling capacity cooling capacity at nominal temperature difference 8 K 3.8 characteristic equation equation that gives the thermal cooling capacity as a function of the temperature difference at constant wa-ter flow rate 3.9 modular cooling capacity cooling capacity of one module calculated from the cooling capacity of the active length of a ceiling mounted radi ant panel 3.10 standard modular cooling capacity cooling capacity of one module at standard conditions 3.11 nominal modular cooling capacity cooling capacity of one module at nominal temperature difference 4 Symbols and units For the purposes of this document, the symbols and units given in EN 14037-1:2016 and the following apply. Table 1 — Symbols and units No. Quantity Symbol Unit 1 Constant of the characteristic equation of the active length KCact W/ K nact - 2 Exponent of the characteristic equation of the active surface nCact - 3 Heat transfer coefficient (air–insulation–wall) u W/(m2 K) 4 Total heat flow in all enclosure walls B W 5 Standard modular cooling capacity CLs W/m 6 Nominal modular cooling capacity CLN W/m 7 Measured cooling capacity of a ceiling mounted radiant panel Cme W 8 Nominal cooling capacity of a ceiling mounted radiant panel CN W 9 Standard cooling capacity of a ceiling mounted radiant panel CS W 10 Total thermal output of simulators S W 11 Nominal temperature difference (8 K) of a ceiling mounted radiant panel when cooling Tcn K 12 Standard temperature difference (15 K) of a ceiling mounted radiant panel when cooling Tcs K SIST EN 14037-4:2017
7 5 Testing of cooling capacity 5.1 Short description The cooling capacity of the test sample shall be determined in its steady condition with measurements of the water flow and the temperature increase in the water. The cooling capacity shall be quoted as function of the temperature difference between the reference temperature and the average water temperature. The test is carried out in a testing system according to EN 14037-2:2016 which consists of a closed booth with controlled temperatures of the inside surfaces plus master panel 1 (according to EN 14037-2:2016, Clause 6). All laboratories performing tests
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.