iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1729-1:2006

(Main)

Furniture - Chairs and tables for educational institutions - Part 1: Functional dimensions

Furniture - Chairs and tables for educational institutions - Part 1: Functional dimensions

This part of European Standard EN 1729 specifies functional dimensions and markings for chairs and tables for general educational purposes in educational institutions. It includes furniture with fixed size mark and adjustable furniture as well as standing work height tables for use without chairs.
It applies to furniture for use with laptop computers or portable devices, but not to special purpose workstations, e.g. laboratories, ranked seating and workshops.
The standard does not apply to furniture used by teaching personnel.

Möbel - Stühle und Tische für Bildungseinrichtungen - Teil 1: Funktionsmaße

Meubles - Chaises et tables pour les établissements d'enseignement - Partie 1: Dimensions fonctionnelles

Pohištvo - Stoli in mize za vzgojno-izobraževalne ustanove – 1. del: Funkcionalne mere

General Information

Status
Withdrawn
Publication Date
11-Jul-2006
Withdrawal Date
01-Dec-2015
ICS
97.140 - Furniture
Technical Committee
CEN/TC 207 - Furniture
Drafting Committee
CEN/TC 207/WG 6 - Test methods for fire behaviour
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
02-Dec-2015
Ref Project
SIST EN 1729-1:2006 - Furniture - Chairs and tables for educational institutions - Part 1: Functional dimensions

Relations

Replaces
ENV 1729-1:2001 - Furniture - Chairs and tables for educational institutions - Part 1: Functional dimensions
Effective Date
22-Dec-2008
Replaced By
EN 1729-1:2015 - Furniture - Chairs and tables for educational institutions - Part 1: Functional dimensions
Effective Date
09-Dec-2015

Buy Standard

EN 1729-1:2006EN 1729-1:2006
PreviousNext
Standard
EN 1729-1:2006
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Furniture - Chairs and tables for educational institutions - Part 1: Functional dimensionsPohištvo - Stoli in mize za vzgojno-izobraževalne ustanove – 1. del: Funkcionalne mereMeubles - Chaises et tables pour les établissements d'enseignement - Partie 1: Dimensions fonctionnellesMöbel - Stühle und Tische für Bildungseinrichtungen - Teil 1: FunktionsmaßeTa slovenski standard je istoveten z:EN 1729-1:2006SIST EN 1729-1:2006en,fr,de97.140ICS:SIST ENV 1729-1:20021DGRPHãþDSLOVENSKI
STANDARDSIST EN 1729-1:200601-september-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1729-1July 2006ICS 97.140Supersedes ENV 1729-1:2001
English VersionFurniture - Chairs and tables for educational institutions - Part 1:Functional dimensionsMeubles - Chaises et tables pour les établissementsd'enseignement - Partie 1: Dimensions fonctionnellesMöbel - Stühle und Tische für Bildungseinrichtungen - Teil1: FunktionsmaßeThis European Standard was approved by CEN on 12 June 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1729-1:2006: E



EN 1729-1:2006 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Terms and definitions.5 3 Functional dimensions for chairs and tables.7 4 Marking.8 5 Instructions.8 Annex A (normative)
Functional dimensions for chairs with slopes between -5 °and + 5 °and associated tables.9 A.1 Functional dimensions and size marks for chairs.9 A.2 Functional dimensions and size marks for tables.14 A.3 Legroom.14 A.4 Requirements for adjustable chairs and tables.15 Annex B (normative)
Functional dimensions for high chairs with double-slope seats and associated tables.17 B.1 Functional dimensions and size marks.17 B.2 Functional dimensions and sizemarks for tables.20 B.3 Legroom.21 B.4 Requirements for adjustable chairs and tables.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15186:2024(Main)
Furniture - Assessment of the surface resistance to scratching
kSIST FprEN 15186:2023

This document specifies a method for the assessment of the surface resistance to different kinds of visible scratches. It relates to the rigid surfaces of all finished products, regardless of their material.
It does not apply to finishes on leather and fabrics.
Method A is suitable for all types of surface coatings and coverings except for melamine faced boards (according to EN 14322) and HPL (according to EN 438 1). It simulates measurable penetrating and/or deforming scratches.
Method B is suitable for all types of surfaces. It simulates first visible traces (e.g. scratches, marks) that can also be a change in the gloss.
The test is intended to be carried out on a part of finished furniture. It can, however, be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test.
It is essential that the test be carried out on unused surfaces.

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 747-2:2024(Main)
Furniture - Bunk beds and high beds - Part 2: Test methods
kSIST FprEN 747-2:2023

This document specifies test methods for the safety, strength and durability of bunk beds and high beds for domestic and non-domestic use.
The tests are applicable to beds with an internal length greater than 1 400 mm and a maximum bed base width of 1 200 mm and with the upper surface of a bed base 600 mm or more above the floor.
The tests are designed to be applied to a bed that is fully assembled and ready for use.
The applicable safety requirements are given in FprEN 747-1:2023.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 747-1:2024(Main)
Furniture - Bunk beds and high beds - Part 1: Safety, strength and durability requirements
kSIST FprEN 747-1:2023

This document specifies requirements for the safety, strength and durability of bunk beds and high beds for domestic and non-domestic use.
It is applicable to bunk beds and high beds with an internal length greater than 1 400 mm and a maximum bed base width of 1 200 mm, and with the upper surface of a bed base of 600 mm or more above the floor.
This document does not apply to bunk beds and high beds used for special purposes, including but not limited to prisons, the military and fire brigades.
If other products are included in a bunk bed/high bed, for example a table or storage furniture, the relevant European Standards could, in addition, apply.
The document contains one annex:
-   Annex A (informative) - Rationales.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15185:2023(Main)
Furniture - Assessment of the surface resistance to abrasion
SIST EN 15185:2024

This document specifies a method for the assessment of the abrasion resistance of surfaces with foils, laminates, melamine faced boards, pigmented and transparent lacquers.
It does not apply to leather and textile surfaces.
It does not apply to the surfaces covered by EN 14434.
The test is intended to be carried out on an unused part of the finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test.
The test is intended to be carried out on unused surfaces.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15372:2023(Main)
Furniture - Strength, durability and safety - Requirements for non-domestic tables
SIST EN 15372:2024

This document specifies requirements for the safety, strength and durability of all types of non-domestic tables including those with glass in their construction.
It does not apply to office work tables or desks, tables for educational institutions, laboratory workbenches for educational institutions and outdoor tables for which EN standards exist.
It does not apply to laboratory workbenches for professional use and industrial workbenches.
It does not apply to tables where the table top is not fixed to the understructure, i.e. when applying test 6, Table 2, the top becomes detached from the understructure.
With exception of the stability tests, this document does not provide assessment of the suitability of any storage features included in non-domestic tables.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing, degradation.
This document has three annexes:
-   Annex A (normative) Test methods for finger entrapment;
-   Annex B (informative) Additional test requirements;
-   Annex C (informative) Test severity in relation to application.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16121:2023(Main)
Non-domestic storage furniture - Requirements for safety, strength, durability and stability
SIST EN 16121:2024

This document specifies requirements for the safety, strength, and durability for all types of non-domestic storage furniture.
It does not apply to domestic storage, industrial storage, kitchen, catering equipment, retail storage, and industrial storage lockers.
Requirements for strength and durability do not apply to the structure of the building for example the strength of wall hanging cabinets includes only the cabinets and the parts used for attachment. The wall and the wall attachments are not included.
The standard contains five annexes
Annex A (normative) Test methods for finger entrapment;
Annex B (normative) Requirements for schools, kindergartens and similar applications
Annex C (normative) Selecting product from a range of furniture
Annex D (informative) Guidance of test severity in relation to application
Annex E (informative) Suggested loads for tests not specified in this standard
It does not include requirements for the resistance to ageing, degradation and flammability.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17850:2023(Main)
Hardware for furniture - Star bases for seating - Requirements and test methods
SIST EN 17850:2024

This document specifies requirements and test methods for the determination of the strength, durability and stiffness of star bases for use for seating with three or more legs.
It is not applicable for star bases intended to be used in child seating products.
It is applicable without regard to materials, design/construction or manufacturing processes.
It is a component standard helping to regulate star-base properties between component manufacturer and manufacturer of final seating. This document is not relevant for the final consumer where standards for complete articles exist.
The requirements are based upon star bases fitted with glides and with castors whose wheels are up to 65 mm diameter and for use by persons weighing up to 150 kg.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17902:2023(Main)
Furniture - Circularity - Evaluation method for dis/re-assembly capability
SIST EN 17902:2024

This document provides guidelines for one aspect of circular economy framework; disassembly and reassembly capability.
This document establishes a set of criteria on which to base an assessment of the ability to access and remove/replace/reassemble priority parts of products. The criteria provided are intended to be used when designing a product and are applicable to different designs, materials, or construction methods.
This document does not include requirements.
The document does not apply to disassembly operation for the sole purpose of separating the individual materials.
This document does not provide a method to evaluate the overall degree of circularity of furniture products. For this, additional complementary evaluation methods for other aspects are necessary.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12521:2023(Main)
Furniture - Safety, strength and durability - Requirements for domestic tables
SIST EN 12521:2024

This document specifies the minimum requirements for the safety, strength and durability of all types of domestic tables intended for use by adults, including those with glass in their construction. It also contains additional test methods in Annex A and Annex B.
It does not apply to office tables and office desks, tables for non-domestic use, tables for educational institutions or outdoor tables for which European Standards exist.
It does not apply to trestle tables.
With the exception of stability tests, this document does not provide assessment of the suitability of any storage features included in domestic tables.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing and degradation.
Annex A (normative) contains test methods for finger entrapment.
Annex B (informative) contains a table top deflection test.
Annex C (informative) contains a rationale.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1022:2023(Main)
Furniture - Seating - Determination of stability
SIST EN 1022:2024

This document specifies test methods and requirements for the determination of the stability of all types of seating for adults weighing up to 110 kg, without regard to use, materials, design/construction or manufacturing process.
The test methods described can be used for seating for children and heavier adults by modifying test loads and loading points.
This document does not apply to children’s highchairs, table mounted chairs and bath seats which are covered by other European Standards.
This standard contains two Annexes:
Annex A (normative) – Seat loading pad data
Annex B (normative) – Test parameters

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day