iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1729-2:2012+A1:2015

(Main + Amendment)

Furniture - Chairs and tables for educational institutions - Part 2: Safety requirements and test methods

Furniture - Chairs and tables for educational institutions - Part 2: Safety requirements and test methods

This European Standard specifies safety requirements and test methods for chairs and tables for general educational purposes in educational institutions.
It applies to furniture for use with laptop computers or portable devices, but not to special purpose workstations, e.g. laboratories, ranked seating and workshops.
Annex A (normative) includes a test method for the drop test of chairs.
With the exception of Annex A, the figures illustrate test principles only and cannot be used to carry out the tests.
NOTE   EN 1729 1 specifies functional dimensions and marking of chairs and tables for general educational purposes.

Möbel - Stühle und Tische für Bildungseinrichtungen - Teil 2: Sicherheitstechnische Anforderungen und Prüfverfahren

Diese Europäische Norm legt die sicherheitstechnischen Anforderungen und Prüfverfahren für Stühle und Tische für die Verwendung in allgemeinen Bildungseinrichtungen fest. Sie gilt für den Gebrauch von Möbeln mit Laptops und tragbaren Geräten, jedoch nicht für Spezialarbeits-plätze, z. B. Laboratorien, Reihenbestuhlung und Werkstätten. Anhang A (normativ) enthält ein Prüfverfahren für die Fallprüfung von Stühlen. Mit Ausnahme von Anhang A zeigen die Bilder nur die Prüfgrundsätze und können nicht zur Durchführung der Prüfungen angewendet werden. ANMERKUNG EN 1729-1 legt die Funktionsmaße und Kennzeichnung von Stühlen und Tischen für die Verwendung in allgemeinen Bildungseinrichtungen fest.

Meubles - Chaises et tables pour les établissements d'enseignement - Partie 2 : Exigences de sécurité et méthodes d'essai

La présente norme européenne spécifie les exigences de sécurité et les méthodes d’essai des chaises et des tables pour l’éducation générale dans les établissements d’enseignement.
Elle s’applique aux mobiliers destinés à être utilisés avec des ordinateurs portables ou des dispositifs portables, mais pas pour un usage spécial comme les postes de travail, par exemple, les laboratoires, les sièges en rangées et les ateliers.
Les figures illustrent uniquement les principes de l’essai et ne peuvent pas être utilisées pour effectuer les essais.
NOTE   L’EN 1729-1 spécifie les dimensions fonctionnelles et le marquage des chaises et des tables pour les établissements d’enseignement général.

Pohištvo - Stoli in mize za vzgojno-izobraževalne ustanove - 2. del: Varnostne zahteve in preskusne metode (vključno z dopolnilom A1)

Ta evropski standard določa varnostne zahteve in preskusne metode za stole in mize za namene splošnega izobraževanja v vzgojno-izobraževalnih ustanovah.
Velja za pohištvo za uporabo prenosnih računalnikov in drugih prenosnih naprav, vendar ne za delovne postaje za posebne namene, kot so laboratoriji, vrstni sedeži in delavnice.
V Prilogi A (normativna) je navedena preskusna metoda za preskus padca stolov.
Slike (razen v Prilogi A) predstavljajo samo načela preskusov in jih ni mogoče uporabiti za izvajanje preskusov.
OPOMBA: Standard EN 1729 1 določa funkcionalne mere in oznake za stole in mize za splošne vzgojno-izobraževalne namene.

General Information

Status
Withdrawn
Publication Date
22-Dec-2015
Withdrawal Date
30-May-2023
ICS
97.140 - Furniture
Technical Committee
CEN/TC 207 - Furniture
Drafting Committee
CEN/TC 207/WG 6 - Test methods for fire behaviour
Current Stage
Ref Project
SIST EN 1729-2:2012+A1:2016 - Furniture - Chairs and tables for educational institutions - Part 2: Safety requirements and test methods

Relations

Merged From
EN 1729-2:2012 - Furniture - Chairs and tables for educational institutions - Part 2: Safety requirements and test methods
Effective Date
19-Jan-2023
Merged From
EN 1729-2:2012/FprA1:2015 - Furniture - Chairs and tables for educational institutions - Part 2: Safety requirements and test methods
Effective Date
18-Jan-2023
Replaced By
EN 1729-2:2023 - Furniture - Chairs and tables for educational institutions - Part 2: Safety requirements and test methods
Effective Date
18-Jan-2023

Buy Standard

EN 1729-2:2012+A1:2016EN 1729-2:2012+A1:2016
PreviousNext
Standard
EN 1729-2:2012+A1:2016
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Möbel - Stühle und Tische für Bildungseinrichtungen - Teil 2: Sicherheitstechnische Anforderungen und PrüfverfahrenMeubles - Chaises et tables pour les établissements d'enseignement - Partie 2 : Exigences de sécurité et méthodes d'essaiFurniture - Chairs and tables for educational institutions - Part 2: Safety requirements and test methods97.140PohištvoFurnitureICS:Ta slovenski standard je istoveten z:EN 1729-2:2012+A1:2015SIST EN 1729-2:2012+A1:2016en,fr,de01-marec-2016SIST EN 1729-2:2012+A1:2016SLOVENSKI
STANDARDSIST EN 1729-2:20121DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1729-2:2012+A1
December
t r s w ICS
{ yä s v r Supersedes EN
s y t {æ tã t r s tEnglish Version
Furniture æ Chairs and tables for educational institutions æ Part
tã Safety requirements and test methods Meubles æ Chaises et tables pour les établissements d 5enseignement æ Partie
tã Exigences de sécurité et méthodes d 5essai
Möbel æ Stühle und Tische für Bildungseinrichtungen æ Teil
tã Sicherheitstechnische Anforderungen und Prüfverfahren This European Standard was approved by CEN on
{ December
t r s s and includes Amendment
s approved by CEN on
s y November
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s w CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s y t {æ tã t r s t ªA sã t r s w ESIST EN 1729-2:2012+A1:2016

Test method for determination of the displacement of chairs placed on tabletops . 24 SIST EN 1729-2:2012+A1:2016

·
t w mmâ e) with the exception of setting up or fo
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15338:2024(Main)
Hardware for furniture - Strength and durability of extension elements and their components
kSIST FprEN 15338:2024

This document specifies test methods and requirements for the strength and durability of all types of extension elements and their components for all fields of application, except table extensions.
The tests consist of the application of loads, forces and velocities simulating normal functional use, as well as misuse, that can reasonably be expected to occur.
With the exception of the corrosion test in 6.4, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The strength and durability tests only relate to the extension elements and the parts used for the attachment, e.g. screws.
The strength and durability tests are carried out in a test frame with specified properties. The test results are only used as a guide to the performance of a piece of furniture.
The test results are only valid for the extension element tested.
Ageing and influences of heat and humidity are not included.

  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15187:2024(Main)
Furniture - Assessment of the effect of light exposure
kSIST FprEN 15187:2024

This document specifies a method for the assessment of the effects of light in indoor conditions, by exposure to artificial radiation and applies to rigid surfaces of all finished products regardless of material.
It does not apply to finishes on leather and fabrics.
The test is intended to be carried out on a part of the finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test.
This document describes the most important parameters, such as the colour change when a surface is exposed and specifies the conditions to be used in the exposure apparatus.
The light resistance of a surface can be assessed by using two apparatus as specified in Clause 4, one as a reference test method, and the other for in-company testing.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15186:2024(Main)
Furniture - Assessment of the surface resistance to scratching
SIST EN 15186:2024

This document specifies a method for the assessment of the surface resistance to different kinds of visible scratches. It relates to the rigid surfaces of all finished products, regardless of their material.
It does not apply to finishes on leather and fabrics.
Method A is suitable for all types of surface coatings and coverings except for melamine faced boards (according to EN 14322) and HPL (according to EN 438 1). It simulates measurable penetrating and/or deforming scratches.
Method B is suitable for all types of surfaces. It simulates first visible traces (e.g. scratches, marks) that can also be a change in the gloss.
The test is intended to be carried out on a part of finished furniture. It can, however, be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test.
It is essential that the test be carried out on unused surfaces.

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 747-1:2024(Main)
Furniture - Bunk beds and high beds - Part 1: Safety, strength and durability requirements
SIST EN 747-1:2024

This document specifies requirements for the safety, strength and durability of bunk beds and high beds for domestic and non-domestic use.
It is applicable to bunk beds and high beds with an internal length greater than 1 400 mm and a maximum bed base width of 1 200 mm, and with the upper surface of a bed base of 600 mm or more above the floor.
This document does not apply to bunk beds and high beds used for special purposes, including but not limited to prisons, the military and fire brigades.
If other products are included in a bunk bed/high bed, for example a table or storage furniture, the relevant European Standards could, in addition, apply.
The document contains one annex:
-   Annex A (informative) - Rationales.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 747-2:2024(Main)
Furniture - Bunk beds and high beds - Part 2: Test methods
SIST EN 747-2:2024

This document specifies test methods for the safety, strength and durability of bunk beds and high beds for domestic and non-domestic use.
The tests are applicable to beds with an internal length greater than 1 400 mm and a maximum bed base width of 1 200 mm and with the upper surface of a bed base 600 mm or more above the floor.
The tests are designed to be applied to a bed that is fully assembled and ready for use.
The applicable safety requirements are given in FprEN 747-1:2023.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15185:2023(Main)
Furniture - Assessment of the surface resistance to abrasion
SIST EN 15185:2024

This document specifies a method for the assessment of the abrasion resistance of surfaces with foils, laminates, melamine faced boards, pigmented and transparent lacquers.
It does not apply to leather and textile surfaces.
It does not apply to the surfaces covered by EN 14434.
The test is intended to be carried out on an unused part of the finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test.
The test is intended to be carried out on unused surfaces.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17850:2023(Main)
Hardware for furniture - Star bases for seating - Requirements and test methods
SIST EN 17850:2024

This document specifies requirements and test methods for the determination of the strength, durability and stiffness of star bases for use for seating with three or more legs.
It is not applicable for star bases intended to be used in child seating products.
It is applicable without regard to materials, design/construction or manufacturing processes.
It is a component standard helping to regulate star-base properties between component manufacturer and manufacturer of final seating. This document is not relevant for the final consumer where standards for complete articles exist.
The requirements are based upon star bases fitted with glides and with castors whose wheels are up to 65 mm diameter and for use by persons weighing up to 150 kg.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15372:2023(Main)
Furniture - Strength, durability and safety - Requirements for non-domestic tables
SIST EN 15372:2024

This document specifies requirements for the safety, strength and durability of all types of non-domestic tables including those with glass in their construction.
It does not apply to office work tables or desks, tables for educational institutions, laboratory workbenches for educational institutions and outdoor tables for which EN standards exist.
It does not apply to laboratory workbenches for professional use and industrial workbenches.
It does not apply to tables where the table top is not fixed to the understructure, i.e. when applying test 6, Table 2, the top becomes detached from the understructure.
With exception of the stability tests, this document does not provide assessment of the suitability of any storage features included in non-domestic tables.
It does not include requirements for electrical safety.
It does not include requirements for the resistance to ageing, degradation.
This document has three annexes:
-   Annex A (normative) Test methods for finger entrapment;
-   Annex B (informative) Additional test requirements;
-   Annex C (informative) Test severity in relation to application.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16121:2023(Main)
Non-domestic storage furniture - Requirements for safety, strength, durability and stability
SIST EN 16121:2024

This document specifies requirements for the safety, strength, and durability for all types of non-domestic storage furniture.
It does not apply to domestic storage, industrial storage, kitchen, catering equipment, retail storage, and industrial storage lockers.
Requirements for strength and durability do not apply to the structure of the building for example the strength of wall hanging cabinets includes only the cabinets and the parts used for attachment. The wall and the wall attachments are not included.
The standard contains five annexes
Annex A (normative) Test methods for finger entrapment;
Annex B (normative) Requirements for schools, kindergartens and similar applications
Annex C (normative) Selecting product from a range of furniture
Annex D (informative) Guidance of test severity in relation to application
Annex E (informative) Suggested loads for tests not specified in this standard
It does not include requirements for the resistance to ageing, degradation and flammability.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17902:2023(Main)
Furniture - Circularity - Evaluation method for dis/re-assembly capability
SIST EN 17902:2024

This document provides guidelines for one aspect of circular economy framework; disassembly and reassembly capability.
This document establishes a set of criteria on which to base an assessment of the ability to access and remove/replace/reassemble priority parts of products. The criteria provided are intended to be used when designing a product and are applicable to different designs, materials, or construction methods.
This document does not include requirements.
The document does not apply to disassembly operation for the sole purpose of separating the individual materials.
This document does not provide a method to evaluate the overall degree of circularity of furniture products. For this, additional complementary evaluation methods for other aspects are necessary.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day