FprEN 1871
(Main)Road marking materials - Paint, thermoplastic and cold plastic materials - Specifications
Road marking materials - Paint, thermoplastic and cold plastic materials - Specifications
The construction products covered and specified by this European Standard are white and yellow paint, thermoplastic and cold plastic materials, with or without premix glass beads, to be used for permanent and/or temporary road markings in circulation areas. Other products and colours intended for road markings are not covered in this European Standard.
This European Standard gives also specifications for the evaluation of conformity for white and yellow paint, thermoplastic and cold plastic materials to be used for permanent and/or temporary road markings in circulation areas including type testing and factory production control.
This European Standard also includes an Annex ZA with the clauses addressing the provisions of the EU Construction Product Directive, for permanent road markings.
Straßenmarkierungsmaterialien - Markierungsfarben, Heißplastikmassen und Kaltplastikmassen - Spezifikationen
Die von dieser Europäischen Norm abgedeckten und festgelegten Bauprodukte sind weiße oder gelbe Markierungsfarben, Heißplastik- und Kaltplastikmassen mit oder ohne Premixglasperlen, die als dauerhafte und/oder vorübergehende Straßenmarkierungen auf Verkehrsflächen verwendet werden. Andere Produkte oder Farben, die für Straßenmarkierungen verwendet werden, werden in dieser Europäischen Norm nicht behandelt.
Diese Europäische Norm enthält auch Festlegungen für die Bewertung der Konformität von weißen oder gelben Markierungsfarben sowie von Heißplastik- und Kaltplastikmassen, die als dauerhafte und/oder vorübergehende Straßenmarkierungen auf Verkehrsflächen verwendet werden, einschließlich der Typprüfung und der werkseigenen Produktionskontrolle.
Diese Europäische Norm enthält auch einen Anhang ZA mit Abschnitten, die die Bestimmungen der EU-Bauproduktenrichtlinie für dauerhafte Straßenmarkierungsmaterialien betreffen.
Produits de marquage routier - Peintures, enduits à froid et à chaud - Spécification
Les produits de construction couverts et spécifiés par la présente Norme européenne sont les peintures blanche et jaune, les enduits à chaud et les enduits à froid, avec ou sans microbilles de verre de pré-mélange, devant être utilisés pour les marquages routiers permanents et/ou temporaires dans les zones de circulation. D’autres produits et d’autres couleurs destinés aux marquages routiers ne sont pas couverts par la présente Norme européenne.
La présente Norme européenne donne également des spécifications pour l’évaluation de la conformité des peintures blanche et jaune, des enduits à chaud et des enduits à froid destinés à être utilisés pour les marquages routiers permanents et/ou temporaires dans les zones de circulation, y compris les essais de type et le contrôle de la production en usine.
La présente Norme européenne comprend également une Annexe ZA dont les articles abordent les dispositions de la Directive UE Produits de construction, pour les marquages routiers permanents.
Materiali za označevanje vozišča - Barve, vroča in hladna plastična masa - Specifikacije
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.6SHFLILNDFLMHStraßenmarkierungsmaterialien - Markierungsfarben, Heißplastikmassen und Kaltplastikmassen - SpezifikationenProduits de marquage routier - Peintures, enduits à froid et à chaud - SpécificationRoad marking materials - Paint, thermoplastic and cold plastic materials - Specifications93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:FprEN 1871kSIST FprEN 1871:2012en,fr,de01-december-2012kSIST FprEN 1871:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
October 2012 ICS 93.080.20 Will supersede EN 1871:2000English Version
Road marking materials - Paint, thermoplastic and cold plastic materials - Specifications
Produits de marquage routier - Peintures, enduits à froid et à chaud - Spécification
Straßenmarkierungsmaterialien - Markierungsfarben, Heißplastikmassen und Kaltplastikmassen - Spezifikationen This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 226.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 1871:2012: EkSIST FprEN 1871:2012
Paint and cold plastics – Test method for determining the chromaticity co-ordinates and luminance factor . 26Annex B (normative)
Paint – Test method for determining the hiding power . 27Annex C (normative)
Paint and cold plastics – Test method for determining the storage stability . 29Annex D (normative)
Paint – Test method for determining the bleed resistance . 33Annex E (normative)
Paint, cold plastics and thermoplastics – Test method for determining the alkali resistance of the materials . 35Annex F (normative)
Thermoplastics – Test method for determining the chromaticity co-ordinates and luminance factor . 38Annex G (normative)
Thermoplastics – Test method for determining the softening point . 39Annex H (normative)
Thermoplastics – Test method for determining the heat stability . 42Annex I (normative)
Thermoplastics – Test method for determining the cold impact resistance . 46Annex J (normative)
Thermoplastics – Test method for determining the indentation value . 48Annex K (normative)
Thermoplastics and cold plastics – Test method for determining the Tröger wear . 51Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 55Bibliography . 64 kSIST FprEN 1871:2012
Preformed road markings, EN 1824, Road marking materials
Road trials, EN 1871, Road marking materials
Paint, thermoplastic and cold plastic materials - Specifications , EN 12802, Road marking materials
Laboratory methods and identification, EN 13197, Road marking materials
Turntable wear simulators, EN 13212, Road marking materials
Requirements for factory production control, EN 13459, Road marking materials
Sampling and testing.
This European Standard also includes an Annex ZA with the clauses addressing the provisions of the EU Construction Product Directive, for permanent road markings. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1436:2007+A1:2008, Road marking materials Road marking performance for road users EN 1824:2011, Road marking materials Road trials EN 12802:2011, Road marking materials Laboratory methods and identification EN 13197:2011, Road marking materials Wear simulator Turntable EN 13459, Road marking materials Sampling from storage and testing EN ISO 787-11:1995, General methods of test for pigments and extenders Part 11: Determination of tamped volume and apparent density after tamping (ISO 787-11:1981) EN ISO 1514, Paints and varnishes Standard panels for testing (ISO 1514) EN ISO 2812-1:2007, Paints and varnishes Determination of resistance to liquids Part 1: Immersion in liquids other than water (ISO 2812-1:2007) EN ISO 4892-2, Plastics Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps (ISO 4892-2) EN ISO 4892-3, Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps (ISO 4892-3) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 paint liquid product which contains binders, pigments, extenders, solvents and additives, which can be supplied in single or multi-component systems and which, when applied, produces a cohesive film by the process of solvent/water evaporation and/or a chemical reaction 3.2 thermoplastic solvent-free marking substance which is supplied in block, granular or powder forms, which is heated to a molten state and then applied, and which forms a cohesive film by cooling kSIST FprEN 1871:2012
surfaces, which has flat areas of a maximum width of 75,7 mm, a maximum length of 125 mm at the top of the structure Note 1 to entry: The areas may be crossed by gaps that take up minimum 25 % of the total surface area and have widths of minimum 5 mm. The areas may have ridges or edges of blocks with a height of minimum 1,2 mm. 3.5.2 non structured road marking assemblies road marking assembly with areas of regular dimensions and flat surfaces, which has flat areas of a minimum width of 75,7 mm and a minimum length of 125 mm at the top of the structure Note 1 to entry: The areas can be crossed by gaps that take up maximum 75 % of the total surface area and have widths of maximum 5 mm. The areas can have ridges or edges of blocks with a height of maximum 1,2 mm. 3.6 batch amount of product produced as one complete operation not being part of a continuous process 3.7 Type I and Type II road markings Type II road markings are road markings with special properties intended to enhance the retroreflection in wet or rainy conditions, Type I road markings do not necessarily have such special properties 4 Requirements 4.1 General This clause gives two separate lists of requirements: 1) Requirements of the base road marking materials. 2) Requirements of road marking assemblies. kSIST FprEN 1871:2012
of the CIE standard system. When measured according to 5.2.1.1, the results of the test for the luminance factor shall comply with Table 1a). Table 1a) — Classes of luminance factor
Colour Class Luminance factor β White LF5 LF6 LF7 ≥ 0,75 ≥ 0,80 ≥ 0,85 Yellow LF1 LF2 ≥ 0,40 ≥ 0,50
When measured according to 5.2.1.1, the chromaticity co-ordinates shall lie within the regions defined by the corner points given in Table 1b). Table 1b) — Chromaticity co-ordinates of white and yellow road marking products Chromaticity co-ordinates Corner point N° 1 2 3 4 White x y 0,355 0,355 0,305 0,305 0,285 0,325 0,335 0,375 Yellow x y 0,494 0,427 0,545 0,455 0,465 0,535 0,427 0,483
4.2.1.2 Hiding power: it is the capacity of the paint to reduce the contrast between a black surface and a white surface over which the paint has been applied and dried. When measured according to 5.2.1.2, the result, expressed as the contrast ratio, shall comply with Table 2. Table 2 — Classes of hiding power Colour Class Hiding Power (contrast ratio) White HP0 HP2 HP3 HP4 No value requested ≥ 90% ≥ 92% ≥ 95% Yellow HP0 HP1 HP2 No value requested ≥ 88% ≥ 90%
4.2.1.3 Storage stability: the paint shall be free from skin and settlement that cannot be re-incorporated by stirring. When tested in accordance with 5.2.1.3, the paint shall have a rating equal to or above 4.
∆β
= original luminance factor – luminance factor after test). Table 3 — Classes of difference in luminance factor after UV ageing Colour Class ∆β White and Yellow UV0 UV1 UV2 No value requested ≤ 0,05 ≤ 0,10
The chromaticity co-ordinates shall lie within the regions defined by the corner points given
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.