EN ISP 10613-4:1996

Information technology - International Standardized Profile RA - Relaying the Connectionless-mode Network Service - Part 4: FDDI LAN subnetwork-dependent, media-dependent requirements (ISO/IEC ISP 10613-4:1995)

Technologies de l'information - Profil normalisé international RA - Relais de service de réseau en mode sans connexion - Partie 4: Prescriptions dépendantes du sous-réseau FDDI LAN, dépendantes des supports (ISO/IEC ISP 10613-4:1995)

Information technology - International Standardized Profile RA - Relaying the Connectionless-mode Network Service - Part 4: FDDI LAN subnetwork-dependent, media-dependent requirements (ISO/IEC ISP 10613-4:1995)

General Information

• Status: Withdrawn
• Publication Date: 19-Mar-1996
• Withdrawal Date: 23-May-2000
• ICS: 35.100.05 - Multilayer applications
• Technical Committee: CEN/CLC - EWOS - CEN/CLC - EWOS
• Drafting Committee: CEN/CLC - EWOS - CEN/CLC - EWOS
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 24-May-2000
• Completion Date: 24-May-2000
• Ref Project: SIST EN ISP 10613-4:1997 - Information technology - International Standardized Profile RA - Relaying the Connectionless-mode Network Service - Part 4: FDDI LAN subnetwork-dependent, media-dependent requirements (ISO/IEC ISP 10613-4:1995)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISP 10613-4:1997
01-december-1997
Information technology - International Standardized Profile RA - Relaying the
Connectionless-mode Network Service - Part 4: FDDI LAN subnetwork-dependent,
media-dependent requirements (ISO/IEC ISP 10613-4:1995)
Information technology - International Standardized Profile RA - Relaying the
Connectionless-mode Network Service - Part 4: FDDI LAN subnetwork-dependent,
media-dependent requirements (ISO/IEC ISP 10613-4:1995)
Technologies de l'information - Profil normalisé international RA - Relais de service de
réseau en mode sans connexion - Partie 4: Prescriptions dépendantes du sous-réseau
FDDI LAN, dépendantes des supports (ISO/IEC ISP 10613-4:1995)
Ta slovenski standard je istoveten z: EN ISP 10613-4:1996
ICS:
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
SIST EN ISP 10613-4:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISP 10613-4:1997

---------------------- Page: 2 ----------------------

SIST EN ISP 10613-4:1997

---------------------- Page: 3 ----------------------

SIST EN ISP 10613-4:1997

---------------------- Page: 4 ----------------------

SIST EN ISP 10613-4:1997
INTERNATIONAL ISO/IEC
STANDARDIZED
ISP
PROFILE 10613-4
First edition
1995-04-15
Information technology - International
Standardized Profile RA - Relaying the
Connectionless-mode Network Service -
Part 4:
FDDI LAN subnetwork-dependent,
media-dependent requirements
Technologies de I’information - Profil normalk international RA -
Relais de Service de r&eau en mode sans connexion -
Partie 4: Prescriptions dbpendantes du sous-rkseau FDDI LAN,
dkpendantes des supports
Reference number
ISO/IEC ISP 10613-4:1995(E)

---------------------- Page: 5 ----------------------

SIST EN ISP 10613-4:1997
ISO/IEC ISP 10613-4: 1995(E)
Paee
Contents
”
. . .
111
Foreword .
V
Introduction .
1
1 Scope .
.................................................... 1
2 Normative references
2
Definitions .
3
3
4 Abbreviations .
3
Requirements .
5
......................................... 3
5.1 Static conformance requirements
4
.......................................
5.2 Dynamit conformance requirements
5
.........................................
Annex A: ISPICS requirements list (normative)
....................................................... 5
A.l Introduction
.............................................. 5
A.2 Notation and conventions
.................................................. 5
A.3 IPRL for ISO 8473
.................................................. 6
A.4 IPRL for ISO 9542
6
.................................................
A.5 IPRL for ISO 8802-2
6
.....................................................
A.6 IPRL for FDDI
7
............................................
Annex B: Recommendations (informative)
....................................................... 7
B.1 Introduction
............................................ 7
B.2 ISO 9542 recommendations
0 ISO/IEC 1995
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronie or mechanical, including photocopying and microfilm, without permission in writing Flom the publisher.
ISO/IEC Copyright Office l Case postale 56 l CH-1211 Geneve l Switzerland
Printed in Switzerland
ii

---------------------- Page: 6 ----------------------

SIST EN ISP 10613-4:1997
0 ISO/IEC ISO/IEC ISP 10613=4:1995(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)
together form a System for worldwide standardization as a whole. National bodies that are members of ISO or
IEC participate in the development of International Standards and Technical Reports through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, govemmental and
non-govemmental, in liaison with ISO and IEC, also take part in the work.
In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
In addition to developing International Standards, ISO/IEC JTC 1 has created a Special Group on Functional
Standardization for the processing of International Standardized Profiles.
An International Standardized Profile is an internationally agreed, harmonized document which identifies a
Standard or group of Standards, together with Options and Parameters, necessary to accomplish a function or a
set of functions.
Draft International Standardized Profiles are circulated to national bodies for voting. Publication as an
International Standardized Profile requires approval by at least 75 % of the national bodies casting a vote.
International Standardized Profile ISO/IEC ISP 10613-4 was prepared with the collaboration of
- Asia-Oceania Workshop (AOW);
- European Workshop for Open Systems (EWOS);
- Open Systems Environment Implernentors’ Workshop (OIW).
ISO/IEC ISP 10613 consists of several Parts, under the general title Information technology - International
Standardized Profile RA - Relaying the Connectionless-mode Network Service:
- Part I : Subnetwork-independent requirements
- Part 2: LAN subnetwork-dependent, media-independent requirements
- Part 3: CSMAICD LAN subnetwork-dependent, media-dependent requirements
- Part 4: FDDI LAN subnetwork-dependent, media-dependent requirements
- Part 5: Dejinition of Profile RA51.51, relaying the Connectionless-mode Network Service between
CSMAICD LAN subnetworks
- Part 6: Definition of Profile RA51.54, relaying the Connectionless-mode Network Service between
CSMAICD LAN subnetworks and FDDI LAN subnetworks
- Part 7: PSDN subnetwork-dependent, media-dependent requirements for
virtual calls over a
permanent access
- Part 8: Definition of proflle RA51.1111, relaying the Connectionless-mode Network Service
between CSMAICD LAN subnetworks and PSDNs using virtual calls over a PSTN leased line
permanent access
. . .
111

---------------------- Page: 7 ----------------------

SIST EN ISP 10613-4:1997
ISO/IEC ISP 10613-4: 1995(E) 0 ISO/IEC
- Part 9: Definition of Profile RA51.1121, relaying the Connectionless-mode Network Service
between CSMAICD LAN subnetworks and PSDNs using virtual calls over a digital data
circuitlCSDN leased line permanent access
- Part 10: Token Ring LAN subnetwork-dependent, media-dependent requirements
- Part 11: Definition of Profile RA51.53, relaying the Connectionless-mode Network Service between
CSMAICD LAN subnetworks and Token Ring LAN subnetworks
- Part 12: Definition of proflle RA53.53, relaying the Connectionless-mode Network Service between
Token Ring LAN subnetworks
- Part 13: Definition of Profile RA53.54, relaying the Connectionless-mode Network Service between
Token Ring LAN subnetworks and FDDI LRN subnetworks
- Part 14: Definition of Profile RA54.54, relaying the Connectionless-mode Network Service between
FDDI LAN subnetworks
- Part 15: Definition of Profile RA53.1 Ill, relaying the Connectionless-mode Network Service
between Token Ring LAN subnetworks and PSDNs using virtual calls over a PSTN leased line
permanent access
- Part 16: Definition of Profile RA53.1121, relaying the Connectionless-mode Network Service
between Token Ring LAN subnetworks and PSDNs using virtual calls over a digital data
circuitlCSDN leased line permanent access
- Part 17: Definition of Profile RA54.1111, relaying the Connectionless-mode Network Service
between FDDI LAN subnetworks and PSDNs using virtual calls over a PSTN leased line
permanent access
- Part 18: Dejinition of Profile RA54.1121, relaying the Connectionless-mode Network Service
between FDDI LAN subnetworks and PSDNs using virtual calls over a digital data circuitlCSDN
leased line permanent access
Annex A forms an integral part of this part of ISO/IEC ISP 10613. Annex B is for information only.

---------------------- Page: 8 ----------------------

SIST EN ISP 10613-4:1997
0 ISO/IEC
ISO/IEC ISP 10613-4: 1995(E)
Introduction
This International Standardized Profile (ISP) is defined in accordance with the principles specified by ISO/IEC
Technical Report 10000.
The context of Functional Standardization is one area in the Overall field of Information Technology (IT)
standardization activities, covering base Standards, profiles, and registration mechanisms. A Profile defines a
combination of base Standards that collectively perform a specific well-defined IT function. Profiles standardize
the use of Options and other variations in the base Standards, and provide a basis for the development of uniform,
intemationally recognized System tests.
ISPs are produced not simply to ‘legitimize’ a particular choice of base Standards and Options, but to promote
real System interoperability. One of the most important roles for an ISP is to serve as the basis for the
development (by organizations other than ISO and IEC) of intemationally recognized test methods. The
development and widespread acceptance of tests based on this and other ISPs is crucial to the successful realiza-
tion of this goal.
ISO/IEC ISP 10613 consists of several parts of which this is part 4. ISO/IEC ISP 10613-1 specifies the Profile
requirements that are subnetwork-independent. There are further parts which specify subnetwork-dependent and
media-dependent requirements. In addition, for each individual Profile there is a part of ISO/IEC ISP 10613
which identifies the specific requirements of that Profile, making reference to appropriate material I?om part 1
and from the subnetwork-dependent Parts of ISO/IEC ISP 10613.

---------------------- Page: 9 ----------------------

SIST EN ISP 10613-4:1997
ISO/IEC ISP 10613-4: 1995(E)
0 ISO/IEC
This page is intentionally left blank
Vl

---------------------- Page: 10 ----------------------

SIST EN ISP 10613-4:1997
INTERNATIONAL STANDARDIZED PROFILE OISO/IEC ISOIIEC ISP 10613-4:1995(E)
Information technology - International Standardized
Profile RA - Relaying the Con
...