EN ISO 14372:2011
(Main)Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen (ISO 14372:2011)
Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen (ISO 14372:2011)
ISO 14372:2011 specifies a method for the relative ranking, by 24 h exposure to humid air and subsequent diffusible hydrogen testing, of manual metal arc electrode coatings related to their tendency to absorb moisture. This test method has limited potential applicability since it is unlikely to be capable of being scaled up for large volumes of testing.
Schweißzusätze - Bestimmung der Feuchteresistenz von Elektroden für das Lichtbogenhandschweißen durch Messung des diffusiblen Wasserstoffs (ISO 14372:2011)
Diese Internationale Norm legt ein Verfahren fest, das die zuverlässige Einteilung von Umhüllungen von Elektroden zum Lichtbogenhandschweißen in konventionelle oder feuchteresistente Umhüllungen aufgrund einer 24-stündigen Auslagerung in feuchter Luft und einer nachfolgenden Prüfung des diffusiblen Wasserstoffs ermöglicht. Dieses Prüfverfahren hat begrenzte potentielle Anwendbarkeit, da es wahrscheinlich für Prüfungen größeren Umfangs nicht anwendbar ist.
Produits consommables pour le soudage - Détermination de la reprise d'humidité des électrodes utilisées en soudage manuel à l'arc avec électrode enrobée, par mesurage de l'hydrogène diffusible (ISO 14372:2011)
ISO 14372:2011 spécifie une méthode de classification relative des enrobages d'électrodes utilisés en soudage manuel à l'arc en fonction de leur tendance à absorber l'humidité. La méthode est fondée sur l'exposition des électrodes, durant 24 h, à de l'air humide et ensuite à de l'hydrogène diffusible. Cette méthode d'essai a une applicabilité potentielle limitée car il est improbable qu'elle puisse être extrapolée pour des volumes d'essai importants.
Dodajni materiali za varjenje - Ugotavljanje občutljivosti za navlaženje elektrod za ročno obločno varjenje z merjenjem difuzijskega vodika (ISO 14372:2011)
Ta mednarodni standard določa metodo za relativno razvrščanje prevlek elektrod za ročno obločno varjenje s 24-urno izpostavljenostjo vlažnemu zraku in poznejšim preskušanjem z difuzijskim vodikom, povezano z njihovo nagnjenostjo k vpijanju vlage. Ta preskusna metoda ima omejeno potencialno uporabnost, ker ni verjetno, da bi se lahko uporabila pri večjih obsegih preskušanja.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schweißzusätze - Bestimmung der Feuchteresistenz von Elektroden für das Lichtbogenhandschweißen durch Messung des diffusiblen Wasserstoffs (ISO 14372:2011)Produits consommables pour le soudage - Détermination de la reprise d'humidité des électrodes utilisées en soudage manuel à l'arc avec électrode enrobée, par mesurage de l'hydrogène diffusible (ISO 14372:2011)Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen (ISO 14372:2011)25.160.20Potrošni material pri varjenjuWelding consumablesICS:Ta slovenski standard je istoveten z:EN ISO 14372:2011SIST EN ISO 14372:2011en,fr,de01-oktober-2011SIST EN ISO 14372:2011SLOVENSKI
STANDARDSIST EN ISO 14372:20031DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 14372
July 2011 ICS 25.160.20 Supersedes EN ISO 14372:2001English Version
Welding consumables -Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen (ISO 14372:2011)
Produits consommables pour le soudage - Détermination de la reprise d'humidité des électrodes utilisées en soudage manuel à l'arc avec électrode enrobée, par mesurage de l'hydrogène diffusible (ISO 14372:2011)
Schweißzusätze - Bestimmung der Feuchteresistenz von Elektroden für das Lichtbogenhandschweißen durch Messung des diffusiblen Wasserstoffs (ISO 14372:2011) This European Standard was approved by CEN on 30 June 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 14372: ESIST EN ISO 14372:2011
Reference numberISO 14372:2011(E)© ISO 2011
INTERNATIONAL STANDARD ISO14372Second edition2011-07-01Welding consumables — Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen Produits consommables pour le soudage — Détermination de la reprise d'humidité des électrodes utilisées en soudage manuel à l'arc avec électrode enrobée, par mesurage de l'hydrogène diffusible
ISO 14372:2011(E)
©
ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2011 – All rights reserved
ISO 14372:2011(E) © ISO 2011 – All rights reserved iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 14372 was prepared by the International Institute of Welding, recognized as an international standardizing body in the field of welding in accordance with Council Resolution 42/1999. This second edition cancels and replaces the first edition (ISO 14372:2000), which has been technically revised. Requests for official interpretations of any aspect of this Interna
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.