iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12082:1998

(Main)

Railway applications - Axleboxes - Performance testing

Railway applications - Axleboxes - Performance testing

This European Standard describes the principles and methods for a rig performance test of assembled axleboxes with rolling bearings according to EN 12080 and with lubricating greases according to EN 12081. Test parameters and minimum performance requirements for vehicles in operation on main lines are specified in clause 6 and Annex A (normative). Different test parameters and performance requirements may be selected for vehicles in operation on other networks. Basic principles for a field test are also determined.

Bahnanwendungen - Radsatzlager - Prüfung des Leistungsvermögens

Diese Europäische Norm beschreibt Grundlagen und Verfahren für die Prüfung des Leistungsvermögens auf dem Prüfstand von montierten Radsatzlagern mit Walzlager nach EN 12080 und Schmierfette nach EN 12081. Für Fahrzeuge im Betrieb auf Hauptbahnen sind die Prüfbedingungen und Mindestleistungsanforderungen in Abschnitt 6 und Anhang A (normativ) spezifiziert. Für Fahrzeuge im Betrieb auf anderen Bahnnetzen dürfen davon abweichende Prüfbedingungen und Leistungsanforderungen gewählt werden. Die Grundlagen einer Betriebserprobung werden ebenfalls festgelegt.

Applications ferroviaires - Boîtes d'essieux - Essais de performance

Cette Norme Européenne décrit les principes et les méthodes d'un essai de performance sur banc, pour les boîtes d'essieux complètes, munies des roulements conformes à EN 12080 et de graisse conforme à EN 12081. Les paramètres d'essai et les exigences minimales de performance pour les véhicules en service sur les lignes principales sont spécifiés dans l'article 6 et en Annexe A (normative). D'autres paramètres d'essai et exigences de performance peuvent être choisis pour les véhicules en service sur d'autres réseaux. Les principes de base d'un essai en service sont aussi déterminés.

Železniške naprave - Ohišja ležajev kolesnih dvojic - Preskus delovanja

General Information

Status
Withdrawn
Publication Date
17-Mar-1998
Withdrawal Date
11-Dec-2007
ICS
45.040 - Materials and components for railway engineering
Technical Committee
CEN/TC 256 - Railway applications
Drafting Committee
CEN/TC 256/SC 2/WG 12 - Roller bearings and Lubricants
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
12-Dec-2007
Completion Date
12-Dec-2007
Directive
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/024 - Mandate to CEN/CENELEC/ETSI for programming and standardization in the field of railway equipment
Ref Project
SIST EN 12082:2001 - Railway applications - Axleboxes - Performance testing

Relations

Replaced By
EN 12082:2007 - Railway applications - Axleboxes - Performance testing
Effective Date
22-Dec-2008

Buy Standard

EN 12082:2001EN 12082:2001
PreviousNext
Standard
EN 12082:2001
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12082:2001
01-marec-2001
Železniške naprave - Ohišja ležajev kolesnih dvojic - Preskus delovanja
Railway applications - Axleboxes - Performance testing
Bahnanwendungen - Radsatzlager - Prüfung des Leistungsvermögens
Applications ferroviaires - Boîtes d'e
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13103-1:2017+A1:2022(Main + Amendment)
Railway applications - Wheelsets and bogies - Part 1: Design method for axles with external journals
SIST EN 13103-1:2018+A1:2023

This European Standard:
— defines the forces and moments to be taken into account with reference to masses, traction and braking conditions;
— gives the stress calculation method for axles with outside axle journals;
— specifies the maximum permissible stresses to be assumed in calculations for steel grade EA1N, EA1T and EA4T defined in EN 13261:2020;
— describes the method for determination of the maximum permissible stresses for other steel grades;
— determines the diameters for the various sections of the axle and recommends the preferred shapes and transitions to ensure adequate service performance.
This European Standard is applicable for:
— axles defined in EN 13261:2020
— powered and non-powered axles and
— all track gauges3.
The powered axle design method of this European Standard applies to:
— solid and hollow powered axles for railway rolling stock;
— solid and hollow non-powered axles of motor bogies;
— solid and hollow non-powered axles of locomotives.
The non-powered axle design method of this standard applies to solid and hollow axles of railway rolling stock used for the transportation of passengers and freight that are not considered in the list above.
This European Standard is applicable to axles fitted to rolling stock intended to run under normal European conditions. Before using this European Standard, if there is any doubt as to whether the railway operating conditions are normal, it is necessary to determine whether an additional design factor has to be applied to the maximum permissible stresses. The calculation of wheelset axles for special applications (e.g. tamping/lining/levelling machines) may be made according to this European Standard only for the load cases of free-rolling and rolling in train formation. This European Standard does not apply to the loads induced by the vehicles in their working mode. They are calculated separately.
This method can be used for light rail and tramway applications.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15611:2020+A1:2022(Main + Amendment)
Railway applications - Braking - Relay valves
SIST EN 15611:2020+A1:2023

This document is applicable to relay valves designated to control the brake cylinder pressure of compressed air brakes fitted to railway vehicles, in association with an air brake distributor valve or other control device. It covers one stage relay valves and relay valves adjusting the brake cylinder pressure in response to a change in vehicle speed or load that is either continuously variable or in two or more stages, i.e. empty – loaded.
Relay valves operating with other pressures, in particular the brake pipe pressure, are not included.
This document specifies the requirements for the design, manufacture and testing of relay valves.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12080:2017+A1:2022(Main + Amendment)
Railway applications - Axleboxes - Rolling bearings
SIST EN 12080:2017+A1:2022

This European Standard specifies the quality parameters of axlebox rolling bearings supporting the load of the vehicle, required for reliable operation of trains on European networks. It covers metallurgical and material properties as well as geometric and dimensional characteristics. It also defines methods for quality assurance and conditions for approval of the products.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16839:2022(Main)
Railway applications - Rolling stock - Head stock layout
SIST EN 16839:2022

This document is applicable to vehicles equipped with buffers and screw coupling systems.
In order to allow operation and coupling of trainsets or vehicles, this document specifies the
defined free space for the shunter called the "Berne rectangle" and the necessary free space for
the installation of the rescue coupler.
This document specifies the location, fixing and free spaces on the headstock of:
- buffers;
- screw coupling systems;
- end cocks;
- pneumatic half couplings;
- connections for electric cables.
It also specifies the calculation of the width of the buffer heads.
Unless otherwise displayed, all dimensions given in this document are nominal values.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15427-2-1:2022(Main)
Railway applications - Wheel/Rail friction management - Part 2-1: Properties and Characteristics - Flange lubricants
SIST EN 15427-2-1:2022

This document specifies the properties and characteristics of lubricants applied to the interface between the wheel flange and the gauge face of the rail, and contact area between the check rail face and the back of the wheel (active interface), either directly or indirectly to the wheel flange or to the rail, and includes both trainborne and trackside solutions.
It outlines the information required for most approval procedures, the method of testing and routine control/monitoring of the lubricant.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15427-1-1:2022(Main)
Railway applications - Wheel/Rail friction management - Part 1-1: Equipment and Application - Flange Lubricants
SIST EN 15427-1-1:2022

This document specifies the requirements for equipment used to apply lubricant to the interface between the wheel flange and the gauge face of the rail, and contact area between the check rail face and the back of the wheel (active interface), either directly or indirectly to the wheel flange or to the rail, and includes both trainborne and trackside solutions.
This document specifies:
—   the characteristics that systems of lubrication of the active interface should achieve, together with applicable inspection and test methods to be carried out for verification;
—   all relevant terminology which is specific to the lubrication of the active interface.
This document applies to the mainline railway.
NOTE   This document can also be used for other railways, e.g urban rail.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 15427-1-3:2021(Main)
Railway applications - Wheel/Rail friction management - Part 1-3: Equipment and Application - Adhesion materials
SIST-TS CEN/TS 15427-1-3:2021

This document is limited to specifying the requirements when applying adhesion material to the interface between the wheel tread and the crown of the rail, and includes both trainborne and trackside solutions.
This document only covers the equipment and application of adhesion material to the active interface.
This document defines:
- the characteristics that systems for the application of adhesion materials of the wheel-rail interface shall achieve, together with applicable inspection and test methods to be carried out for verification;
- all relevant terminology which is specific to the adhesion materials of the wheel-rail interface.
This document only applies to the mainline railway.
NOTE 1 This document can also be used for other railways, e.g urban rail.
NOTE 2 Where technologies are used to influence the wheel/rail interface, other than the application of a material, this document is out of scope but can be used as guidance.

  • Technical specification
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12082:2017+A1:2021(Main + Amendment)
Railway applications - Axleboxes - Performance testing
SIST EN 12082:2017+A1:2021

This European Standard specifies the principles and methods for a rig performance test of the system of axlebox rolling bearing(s), housing, seal(s) and grease. Test parameters and minimum performance requirements for vehicles in operation on main lines are specified. Different test parameters and performance requirements may be selected for vehicles in operation on other networks (e.g. urban rail). This standard is historically developed for outboard applications but can be used for vehicles with other bearing arrangements (e.g.: inboard application or single wheels).
It gives some possible examples where a "sequenced performance test" addresses the broad range of different service conditions within a specific application or vehicle platform into account.
It describes in detail the water tightness test and basic principles and minimum requirements for a field test.
This European Standard only applies to axleboxes equipped with rolling bearings and greases according to EN 12080 and EN 12081.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14198:2016+A2:2021(Main + Amendment)
Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives
SIST EN 14198:2017+A2:2021

This European Standard specifies basic requirements for the braking of trains hauled by locomotives:
-   For trains hauled by locomotives and intended for use in general operation each vehicle is fitted with the traditional brake system with a brake pipe compatible with the UIC brake system.
NOTE   This ensures technical compatibility of the brake function between vehicles of various origins in a train (see 5.4).
-   For trains hauled by locomotives and intended for use in fixed or predefined formation, the requirements on the vehicle and the train are necessary. In the case of a UIC brake system, this standard applies; if not, the EN 16185 series or the EN 15734 series applies.
If concerned, the UIC brake architecture described in this standard (see 5.4) can be used for brakes for multiple unit train and high speed trains and urban rail described in the EN 13452 series, the EN 16185 series and the EN 15734 series.
This European Standard also takes into account electrical and electronic control functions and additional brake systems like dynamic brakes and adhesion independent brakes.
The brake system requirements, which are specific for on-track machines are set out in EN 14033 1.
This European Standard does not apply to Urban Rail rolling stock braking system, which is specified by EN 13452 1.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13749:2021(Main)
Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames
SIST EN 13749:2021

This document specifies the method to be followed to achieve a satisfactory design of bogie frames and includes design procedures, assessment methods, verification and manufacturing quality requirements. It is limited to the structural requirements of bogie frames including bolsters and axlebox housings. For the purpose of this document, these terms are taken to include all functional attachments, e.g. damper brackets.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day